• 14 •
9 Removecupsandserve.
10 Tomakemoreespresso,carefullyandslowlyremovethe
filter holder by moving handle to the left. Be careful as
hot water will be on top of the coffee grinds in the holder.
Some water will continue to drip from brewing head as
filter holder is removed. That is normal and due to the
pump pressure in the system.
Knockoutusedcoffeegrindsfromlter.Formoreespresso
repeatsteps5to9above.
Using Coffee Pods
Tousecoffeepods,remembertoonlyusethe“Perfectcrema”
podlter(11).
Note: If present, remove the “Perfect crema” filter for ground
coffee (11).
1 Follow the procedure described under “Preparation”.
2 Insertthe“perfectcream”lterforpods(11).
IMPORTANT NOTE: If the frothing jet device (14) is not
inserted, the filter holder does not brew coffee correctly.
For this reason, make sure that the device is always
inserted in the filter holder before placing the Perfect
crema filter.
3 Insertthelterholder(10)intothebrewunitfromthe
bottom and wait for it to heat up.
4 Placeacontainerunderthelterholder(10).Preheatthe
filter holder by pressing the hot water/coffee button (this
is only required for the first coffee).
Water will start coming out.
5 Afterhavingdispensed150ccofwater,pressthehot
water/coffee button again.
6 Afterthewarm-up,removethelterholder(10)and
insertthepod.Makesurethepaperofthepoddoesnot
overhang the filter holder.
7 Insertthelterholderintothemachinewitha45°
movement towards the left.
8 Rotateittotherighttotightenitintoposition.Thelter
holder handle shall be perpendicular to the machine or
slightly tilted towards the right.
9 Placeacupunderthelterholder.Pressthehotwater/
coffee button.
Coffeewillstartcomingout.
10 Whenthecupis3/4full,pressthehotwater/coffee
buttonagain.Removethecupandserve.
How to make a good Espresso coffee:
1 Follow the procedure described under “Preparation”.
IMPORTANT NOTE: If the frothing jet device (14) is not
inserted, the filter holder does not brew coffee correctly.
For this reason, make sure that the device is always
inserted in the filter holder before placing the Perfect
crema filter.
Insertthe“Perfectcrema”lterforgroundcoffee(12)
intothelterholder,bothforbrewing1or2coffeecups.
Insertthelterholder(10)intothebrewunitfromthe
bottom and wait for it to heat up.
2 Placeacontainerunderthelterholder(10).Preheatthe
lterholderbypressingthehotwater/coffeebutton(2)
(this is only required for the first coffee).
Water will start coming out.
3 Afterhavingdispensed150ccofwater,pressthehot
water/coffeebutton(2)again.
4 Waituntilthemachinehasreachedthecorrecttempera-
turewithlterholderinserted(theheatingtimelastsa
fewminutes).
Usethistimetosettable,preparecups,coffee,milk,etc.
5 Afterthewarm-upperiod,removethewarmlter-holder
(10)fromthebrewingheadandllwithcorrectlyground
espresso coffee using the measuring spoon provided.
Placeonelevelmeasureofcoffeeinbasketforeachcup
of espresso.
Donotoverll.
Gentlytampdowncoffeewiththetamper(15)provided.
Donotcompresstoormly.
6 Cleananyexcesscoffeefromtherimoflterholder(10).
Insert filter holder into brew head by holding handle
approximately45degreestotheleftasyoufacemachine.
When properly aligned,move handle firmly to the right to
lockintoposition.Thehandleshouldpointtothefrontof
the machine or slightly to the right.
7 Placeoneortwoespressocupsonthedripplatetolineup
withthespoutsofthelterholder.Pressthehotwater/
coffee button.
Espressowillstarttoowintocups.
8 Whenthecupsare3/4full,pressthehotwater/coffee
button.
Themorewateryouallowtoow,theweakerthecoffee.
When properly made, the espresso will have a light brown
foam“crema”oatingonthetop.
If not, refer to “In the event of faulty function”.