Intelligent Addressable Product Range
Passive Repeater Panel DF6000PR
Overview
The DF6000PR is a cost effective passive repeater
panel which can be programmed via its informative
display to be either fully passive (display only) or
semi passive (restricted system control).
When loop connected the repeater panel will display
the system information text of the connected control
panel and will provide a fire indication, with panel
number, of any
connected network control panel that
h
as fire activation.
The DF6000PR repeater panel only requires
programming with local text information.
In addition to the repeater panels main menu driven
2 x 40 backlit LCD display, which provides system
status information, it also has 6 supervisory LED’s
(Power On, Alarm, Trouble, Supervisory, Test In
Progress, and Scroll).
2 x 40 backlit LCD display and 6 supervisory LED’s
Features
• Up to 20 repeaters can be
connected to the loop
• 2 x 40 backlit LCD display and
6 supervisory LED’s
• Compact size
• Can be surface or semi-
recessed mounted
Benefits
• Menu driven easy to operate
• Simple connection to panel
loop circuit reduces wiring and
installation time
• Distance run up to 2km from
main panel without additional
cable and equipment, saving
cost
simple user interface DF6000PR passive repeater panel
cfs0018_UK_R1_menvier-data-sheets_Layout 1 04/08/2011 12:05 Page 61
Intelligent Security & Fire Ltd
Cooper Lighting and Safety Ltd, Wheatley Hall Road, Doncaster, South Yorkshire, DN2 4NB. UK.
T: +44 (0) 1302 303350 l F: +44 (0) 1302 303332 l E: [email protected] l W: www.cooperfire.com
Intelligent Addressable Passive Repeater Panel - DF6000PR
Code CF30000PR
Description Passive repeater panel
Standards EN54 Pt4
Specification
Mains Input Voltage 230V ac +10% / -15%
Operating Voltage 24V dc
System Indicators Power on, fire, fault, test, disable and scroll
System Controls Silence alarms, evacuate and reset
Input Ports RS232 (for connection of programmer)
Battery 1 x 12V 3.2Ah
Standby Duration 24 hours
Environmental
Operating Temperature 0°C to +25°C
Humidity (Non Condensing) 0 to 75% RH
Physical
Construction PC/ABS
Colour Light Grey
Dimensions (H x W x D) 332mm x 270mm x 92mm
Weight 3.6kg
Ingress Protection IP30
Compatibility
Suitable for use with Menvier intelligent addressable fire systems
Technical Specification
Installation
1. Wall mounted by means of 4 fixing screws.
2. Cable entry at top or back.
3. 12 top entry gland holes with push out blanking
plugs.
4. 4 separate rear access cable entry facilities.
5. Local mains supply required.
System Functionality
1. Panel operates in either normal, supervisor or
engineer mode.
2. Supervisor and engineer modes are accessed via
4 digit pass codes.
3. Supervisor mode allows silence, evacuate and
r
eset commands to be sent to host panel (loop
connected) or to network (network connected).
4. Engineer mode enables password to be changed if
required and allows access to text download menu
5. When connected to network, all text is transmitted
via network, changes to other network panels
update automatically.
6. When connected to a detector
loop, text for host is
d
ownl
oaded to repeater and
u
pdated manually as required.
7. Zonal fire and fault indication is
by means of 2 x 40 character
LCD display.
Device Overview
1. Panel can be connected to
either the detection loop of a
single panel or to a network as
part of a networked system.
2. Supplied with integral power
supply and standby battery.
Dimensions
W
H
D2
D1
1
2
3
4
5
SCROLLMUTE
BUZZER
H (mm) W (mm) D1 (mm) D2 (mm)
270 332 45 47
Code Description
DF6000PR Intelligent addressable passive repeater panel, loop connected
DF6000PRNC Intelligent addressable passive repeater panel, network connected
Product Codes
Mains Supply
Network Link
Mains Supply
Mains Supply
Network Link
Loop Connected
Network Connected
Note: In this configuration the repeater would give
‘text’ information for the panel that is on the
loop, but only address number for the other
panel on the network.
Standard Connection
-
+
SCREEN
-
+
SCREEN
LOOP
OUT
LOOP
IN
SCREEN
Tx +
Tx -
Rs485
MIMIC
TEXT DOWNLOAD
cfs0018_UK_R1_menvier-data-sheets_Layout 1 04/08/2011 12:05 Page 62
Intelligent Security & Fire Ltd
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Zeta PRE-REP Installation guide
-
-
Eaton CF30002GP Operating instructions
-
-
FlameStop PFS200-2 Operating instructions
-
GST GST200-2 Operating instructions
-
-
Zeta PR-AL/4 User manual
-
-
Mircom LT-1012 PRO-2000 Installation guide
