2. Schlage
  3. ND
ND

Schlage ND, ND-Series Full Size Interchangeable Core Tailpiece Operating instructions

  • Hello! I've reviewed the installation instructions for the Schlage D-Series Full Size Interchangeable Core Tailpiece. The document outlines the steps for aligning the tailpiece, ensuring the notch is aligned with the cap pin, and snapping the tailpiece into place. I'm ready to answer any questions you have about this installation process.
  • What is the first step in installing the tailpiece?
    What must be aligned before snapping the tailpiece into place?
    What is the final step of installation?
Installation Instructions
D-Series Full Size Interchangeable Core Tailpiece
1. Align tailpiece with core as shown.
2. Ensure notch is aligned with cap pin.
3. Snap tailpiece into place.
Notch
Tailpiece
Core
Cap Pin
Tailpiece
Core
©2005 Ingersoll-Rand Company
Printed in U.S.A.
Rev. 01/05
/