2. ROOMS TO GO
  3. 15422722

ROOMS TO GO 15422722, 15422734 Assembly Instructions

  • Hello! I've reviewed the Assembly Instructions for the ROOMS TO GO SYNE K2272-10 Loveseat. This document provides a step-by-step guide to assemble the product. It includes information on attaching the plastic legs and securing the loveseat back. I'm ready to answer any questions you might have about the assembly process.
  • Where are the plastic legs located?
    How do you attach the legs?
    How do you lock the back in place?
A
A
B
B
Step 1
The plastic legs are located inside the black dust cover
under loveseat. Unzip the dust Cover and remove the
legs. Attach each leg to corresponding pre-drilled hole,
turning by hand in clockwise direction until legs are
tight.
Step 2
Slide the metal receiver over the
metal post.Press both sides of back
firmly downward until locked in
place.
/