2. Jlab Audio
  3. JBuddies Folding

Jlab Audio JBuddies Folding, JBuddies Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Jlab Audio JBuddies Folding Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
JLab is excited and proud to have produced the first high-quality, stylish, safe headphones just for kids! Please read the following safety info
carefully to ensure safe use.
This product should always be used under adult supervision. It does contain a cable with a small jack that could pose a choking hazard
without adult supervision. Please be mindful while your child enjoys using the JBuddies.
TO ADJUST VOLUME LEVEL
Turn the dial on the right earpiece clockwise to
lower the volume or counterclockwise to raise
the volume (fig. C).
The direction is indicated by markings on the
bottom of the earpiece.
TO INSTALL YOUR FAVORITE GRAPHIC DISK
fig. B
fig. A
fig. C
JBUDDIES
KIDS HEADPHONES
JLABAUDIO.COM
Peel off protective paper backing to
expose adhesive (fig. A).
With the adhesive side facing the headphones,
firmly press the disk into the open area on the
side of the earpiece (fig. B).
Repeat steps for the other side.
1
2
C
U
S
T
O
M
E
R
S
U
P
P
O
R
T
U
.
S
.
B
A
S
E
D
We love that you are rocking JLab Audio!
We take pride in our products and fully stand behind them.
YOUR WARRANTY
All warranty claims are subject to JLab Audio
authorization and at our sole discretion. Retain your
proof of purchase to ensure warranty coverage.
CONTACT US
Reach out to us at [email protected]
or visit jlabaudio.com/contact
REGISTER TODAY
jlabaudio.com/register
Product updates | How-to tips
FAQs & more
CAUTIONS
• Avoid getting moisture or liquids on the headphone cups.
• Avoid extreme heat, cold, and humidity.
• Avoid dropping or crushing headphones, stressing the cable by rapid pulling or extreme force, or bending the cable at a sharp angle.
• Wax may build up in headphone cups, lowering the sound quality. Carefully remove the wax with a cotton swab or other small tool to
improve the sound quality.
• If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.
• If you experience regular discomfort while using this product, discontinue use and consult your physician.
• We recommend you treat your headphones as you would a nice pair of sunglasses and keep them in safe location when not in use.
Shop products | Product alerts | Burn-in your headphones
JLab Audio + Burn-in Tool
/