Netscout LinkRunner G2 User manual

LinkRunner G2
Brand
Netscout
Model
LinkRunner G2
Category
Cable network testers
Type
User manual

Netscout LinkRunner G2 is an Android-based network testing and troubleshooting tool that allows networking professionals to easily verify network connectivity, validate cabling, and act as a packet reflector for performance tests run by other NETSCOUT testers. With its user-friendly interface, LinkRunner G2 simplifies complex network tasks, enabling efficient troubleshooting and maintenance.

Netscout LinkRunner G2 is an Android-based network testing and troubleshooting tool that allows networking professionals to easily verify network connectivity, validate cabling, and act as a packet reflector for performance tests run by other NETSCOUT testers. With its user-friendly interface, LinkRunner G2 simplifies complex network tasks, enabling efficient troubleshooting and maintenance.

NETSCOUT SYSTEMS, Inc.
LinkRunner™ G2
User Guide
October 30, 2017
Legal Notification
Use of this product is subject to the End User License
Agreement available at http://enterprise.netscout.com/EULA
or which accompanies the product at the time of shipment or,
if applicable, the legal agreement executed by and between
NETSCOUT SYSTEMS, INC., and the purchaser of this product
("Agreement").
Government Use and Notice of Restricted Rights: In U.S.
government ("Government") contracts or subcontracts,
Customer will provide that the Products and Documentation,
including any technical data (collectively "Materials"), sold or
delivered pursuant to this Agreement for Government use are
commercial as defined in Federal Acquisition Regulation
("FAR") 2.101 and any supplement and further are provided
with RESTRICTED RIGHTS. All Materials were fully developed
at private expense. Use, duplication, release, modification,
transfer, or disclosure ("Use") of the Materials is restricted by
the terms of this Agreement and further restricted in
accordance with FAR 52.227-14 for civilian Government agency
purposes and 252.227-7015 of the Defense Federal Acquisition
Regulations Supplement ("DFARS") for military Government
agency purposes, or the similar acquisition regulations of
other applicable Government organizations, as applicable and
amended. The Use of Materials is restricted by the terms of
this Agreement, and, in accordance with DFARS Section
227.7202 and FAR Section 12.212, is further restricted in
accordance with the terms of NETSCOUT's commercial End
User License Agreement. All other Use is prohibited, except as
described herein.
This Product may contain third-party technology. NETSCOUT
may license such third-party technology and documentation
2
("Third-Party Materials") for use with the Product only. In the
event the Product contains Third-Party Materials, or in the
event you have the option to use the Product in conjunction
with Third-Party Materials (as identified by NETSCOUT in the
applicable Documentation), then such third-party materials
are provided or accessible subject to the applicable third-party
terms and conditions contained in the "Read Me" or "About"
file located on the Application CD for this Product. To the
extent the Product includes Third-Party Materials licensed to
NETSCOUT by third parties, those third parties are third-party
beneficiaries of, and may enforce, the applicable provisions of
such third-party terms and conditions.
Open-Source Software Acknowledgment: This product may
incorporate open-source components that are governed by the
GNU General Public License ("GPL") or licenses that are
compatible with the GPL license ("GPL Compatible License"). In
accordance with the terms of the GNU GPL, NETSCOUT will
make available a complete, machine-readable copy of the
source code components of this product covered by the GPL or
applicable GPL Compatible License, if any, upon receipt of a
written request. Please identify the product and send a
request to:
NETSCOUT SYSTEMS, Inc.
GNU GPL Source Code Request
310 Littleton Road
Westford, MA 01886
Attn: Legal Department
NETSCOUT SYSTEMS, INC. reserves the right, at its sole
discretion, to make changes at any time in its technical
information, specifications, service, and support programs.
3
Contents
Contact Us 7
Introduction 8
About this Guide 9
Most Commonly Used Features 11
Safety 12
Physical Features 14
Buttons and Ports 15
Power and Charging 18
Maintenance 20
Home Screen and Android Interface 21
Home Screen 22
Swiping and Navigation 26
Top Notification Panel 27
Quick Settings Panel 29
Device Settings 30
Sharing 31
LinkRunner G2 Application Settings 33
4
Left-Side Navigation Drawer 34
Configuring Test Settings 35
Profiles and Jobs 41
LinkRunner G2 Tests and Results 44
AutoTest 45
Floating Action Button 59
Switch Test 60
Cable Test 62
Link-Live Cloud Service 67
Getting Started in Link-Live 68
Software Management 70
Managing Files 71
Updating Firmware 75
Restoring Factory Defaults 77
Changing the Language 78
Additional Features 79
Reflector 80
Camera and Flashlight 83
5
Wi-Fi Bluetooth USB Adapter 84
Specifications and Compliance 87
Specifications and Compliance 88
6
Contact Us
Online: http://enterprise.netscout.com
Email: CustomerCare@netscout.com
Phone: 1-844-833-3713
For more phone numbers, go to our website
enterprise.netscout.com/contact.
NETSCOUT SYSTEMS, Inc.
310 Littleton Road
Westford, MA 01886
www.NETSCOUT.com
Register your LinkRunner G2
Registering your product with NETSCOUT gives
you access to valuable information on product
updates, troubleshooting procedures, and other
services.
To register, fill out the online form on the
NETSCOUT website at
http://enterprise.netscout.com/register.
7
Introduction
The LinkRunner G2 is
an Android-based
network testing and
troubleshooting tool. It
allows networking
professionals to easily
verify network
connectivity and
validate cabling.
LinkRunner G2 can also
act as a packet reflector
for performance tests
run by other NETSCOUT
testers.
8
LinkRunner G2 User Guide
About this Guide
This User Guide covers all the LinkRunner G2
(LR G2) testing functionality and basic elements of
the Android interface. This guide is meant for
users knowledgeable about networking testing
operations.
For additional help with your LR G2, visit
Link-Live.com, and create an account. In Link-Live,
select the navigation menu icon at the top left
of the page to open the navigation drawer, and
click .
If you already have a Link-Live Cloud Service
account, you can go directly to
Link-Live.com/Questions for Knowledge Base
articles and Frequently Asked Questions.
PDF Reader Application
A PDF reader application is pre-installed on your
LinkRunner G2 device for the purpose of viewing
this guide. With it, you can navigate through the
pages, touch headings in the Contents list and
blue links to skip to specific sections or open
9
Introduction
external websites, and use the search feature to
find specific terms.
10
Introduction
Most Commonly Used
Features
Touch the links below to skip to the instructions
for the features listed:
"AutoTest" on page45
"Cable Test" on page62
"Switch Test" on page60
"Configuring Test Settings" on page35
"Home Screen" on page22
"Reflector" on page80
"Wi-Fi Bluetooth USB Adapter" on page84
11
Introduction
Safety
Observe the following safety information:
Use only the AC Adapter provided or Power over
Ethernet to charge the battery.
Use the proper terminals and cable for all
connections.
To avoid possible electric shock or personal injury,
follow these guidelines:
l Do not use the product if it is damaged.
Before using the product, inspect the case,
and look for cracked or missing plastic.
l Do not operate the product around explos-
ive gas, vapor, or dust,
l There are no serviceable parts. Do not try to
service the product.
l If this product is used in a manner not spe-
cified by the manufacturer, the protection
provided by the product may be impaired.
12
Introduction
Safety Symbols
W
Warning or Caution: Risk of
damage to or destruction of
equipment or software.
X
Warning: Risk of electrical shock.
Certified by UL North America
Safety Standards.
j
Not for connection to a public
telephone system.
*
Class 1 Laser Product. Do not
look into the laser.
13
Introduction
Physical Features
This User Guide section
illustrates the ports and buttons
on the LinkRunner G2 and
describes charging and
maintenance.
14
LinkRunner G2 User Guide
Buttons and Ports
Button and port functions are described below.
Touchscreen
USB Port
100/1000 BASE-X
Fiber Port
RJ-45 LAN
Port and
Trasmit
LEDs
RJ-45 Cable Test/
Wire Mapping
(WMAP) Port
Micro-USB
On-the-go
Port
Micro-SD
Card Slot
Charging
Port
Kensington
Lock
Camera
and
Flash
Volume
Buttons
Microphone
Speaker
Power Button
and LED
Figure 1: LinkRunner G2 Physical Features
15
Physical Features
Feature Description
100/1000 BASE-X
Fiber Port
Connects to an SFP adapter and
fiber cable
USB Port
Connects to any USB device
RJ-45 LAN Port
(10/100/1000
BASE-T)
Connects to the network using
an Ethernet cable
Charges the unit if PoE is
available
Transmit LEDs
Green LED lit: Linked
Yellow LED flashing: Activity
Cable Test/Wire
Mapping Input
(WMAP)
Used for patch cable testing
Power Button
and LED
Glows green when the unit is
powered on
Glows red when the unit is
charging
Charging Port
Connects to AC adapter for
charging
Microphone
Allows voice input
Camera and
Flash
Captures images and acts as a
flashlight
Micro SD Card
Slot
Used for removable storage
expansion
16
Physical Features
Feature Description
Micro USB On-
the-Go Port
Connects to a USB On-the-Go
cord for communicating with a
PC or USB peripheral
Kensington
Lock
Allows you to lock your unit
Volume Buttons
Increase or decrease the audio
volume
Speaker
Produces audio
17
Physical Features
Power and Charging
The LinkRunner G2 contains a rechargeable
Lithium Ion battery. You can charge your LR G2
using either AC or Power over Ethernet (PoE). The
LinkRunner G2 does not charge via the USB port.
See Buttons and Ports.
Charging
To charge with AC power, plug the included AC
adapter into an AC outlet, and connect it to the
charging port on the device.
To charge with PoE, connect the RJ-45 port on the
device to a network switch with PoE available or
with a PoE injector.
NOTE: The LR G2 must be powered on or in sleep
mode to charge via PoE.
Charge the battery for 4-6 hours before first use.
Powering On
l Press the power button on the front of the
unit to power on the LinkRunner G2.
l When the unit is on, press the power button
to put it in sleep mode.
18
Physical Features
l To shut down, hold the power button for
one second until the Power off dialog box
appears on the touchscreen, then tap
Power off .
l To perform a hard power off (without shut-
ting down the software), press and hold the
power button for five seconds.
The first time you turn it on, the LinkRunner G2
testing application opens and begins testing your
network immediately. Connect the top RJ-45 LAN
port or 100/1000 BASE-X Fiber port to an active
network to begin receiving test results.
19
Physical Features
Maintenance
To clean the display, use a lens cleaner and a soft,
link-free cloth.
To clean the case, use a soft cloth that is moist with
water or a weak soap.
WCAUTION: Do not use solvents or abrasive
materials that may damage the product.
20
Physical Features
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91

Netscout LinkRunner G2 User manual

LinkRunner G2
Brand
Netscout
Model
LinkRunner G2
Category
Cable network testers
Type
User manual

Netscout LinkRunner G2 is an Android-based network testing and troubleshooting tool that allows networking professionals to easily verify network connectivity, validate cabling, and act as a packet reflector for performance tests run by other NETSCOUT testers. With its user-friendly interface, LinkRunner G2 simplifies complex network tasks, enabling efficient troubleshooting and maintenance.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents