Daytona 64601 Owner's manual

Brand: Daytona

Model: 64601

Type: Owner's manual

This manual is also suitable for

Item 64601

The Daytona 64601 is a heavy-duty wheel dolly capable of lifting and moving vehicles weighing up to 1300 lbs. with a maximum tire width of 11 inches. Ideal for use in pairs, this wheel dolly features locking swivel casters for added stability and control. It also boasts a foot pedal for easy lifting and lowering, as well as a lever for adjusting the height of the rollers. Whether you're a professional mechanic or a DIY enthusiast, the Daytona 64601 is a valuable tool for any garage or workshop.

Visit our website at: http://www.harborfreight.com

Email our technical support at: [email protected]

64601

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly,

operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the

back of the manual near the assembly diagram (or month and year of purchase if product has no number).

Keep this manual and the receipt in a safe and dry place for future reference. 18h

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

2018 by Harbor Freight Tools

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly an d se rv ic e may n ot b e in cl uded.

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

Page 2 For technical questions, please call 1-888-866-5797. Item 64601

WARNING SYMBOLS AND DEFINITIONS

This is the safety alert symbol. It is used to alert you to potential

personal injury hazards. Obey all safety messages that

follow this symbol to avoid possible injury or death.

Indicates a hazardous situation which, if not avoided,

will result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in minor or moderate injury.

Addresses practices not related to personal injury.

IMPORTANT SAFETY INFORMATION

Failure to heed these markings may result in personal injury and/or property damage:

1. Study, understand, and follow all instructions

before operating this device.

2. Do not exceed rated capacity.

3. Use only on hard, level surface.

4. Before moving a load, assure that the load is

centered and secured with a load restraint device.

5. No alterations shall be made to this product.

6. Wear ANSI-approved safety goggles and

heavy-duty work gloves during use.

7. Keep clear of load’s path while placing on and

removing from dollies, and while moving.

8. Use as intended only. Do not use for

aircraft purposes. Use only in pairs.

9. Inspect before every use; do not use

if parts are loose or damaged.

10. Be aware of dynamic loading! Sudden

load movement may briefly create excess

load causing product failure.

11. Assemble only according to these instructions.

Improper assembly can create hazards.

12. Keep your work area clean and well lit.

Cluttered work areas invite accidents.

13. Keep bystanders, children, and visitors away

while operating Wheel Dolly. Distractions

can cause you to lose control.

14. Stay alert. Watch what you are doing, and

use common sense when operating Wheel

Dollies. Do not use while tired or under the

influence of drugs, alcohol, or medication. A

moment of inattention while operating Wheel

Dollies may result in serious personal injury.

15. Before use, read manufacturer’s instruction

manual for the vehicle you will lift.

16. Keep clear of load while lifting and lowering.

17. Do not work under vehicle while on Dollies.

18. Lower load slowly.

19. Weight capacity and other product capabilities apply

to properly and completely assembled product only.

20. Store idle Wheel Dollies out of reach of children

and other untrained persons. Jacks are

dangerous in the hands of untrained users.

21. Wheel Dolly service must be performed

only by qualified repair personnel. Service

or maintenance performed by unqualified

personnel could result in a risk of injury.

22. When servicing a Wheel Dolly, use only identical

replacement parts - refer to attached, product-specific

parts list and diagram. Follow instructions in the

“Inspection, Maintenance, And Cleaning” section of

this manual. Use of unauthorized parts or failure to

follow maintenance instructions may create a risk

of injury and may void any applicable warranty.

23. Industrial applications must follow

OSHA requirements.

Page 3For technical questions, please call 1-888-866-5797.Item 64601

24. Do not allow anyone in the vehicle while using

the Wheel Dolly. Do not start the vehicle while

it is on Wheel Dollies. Keep all bystanders

a safe distance away from the vehicle.

25. This product is not a toy. Do not allow

children to play with or near this item.

26. Maintain product labels and nameplates.

These carry important safety information.

If unreadable or missing, contact

Harbor Freight Tools for a replacement.

27. The warnings, precautions, and instructions

discussed in this manual cannot cover all possible

conditions and situations that may occur. The

operator must understand that common sense and

caution are factors, which cannot be built into this

product, but must be supplied by the operator.

28. Do not roll while loaded over rough surfaces,

such as concrete seams. Use on flat, level, hard

surface only. Wheels may scratch or dig into less

durable surfaces (such as linoleum or wood).

SAVE THESE INSTRUCTIONS.

Specifications

Rated Capacity 1300 lb.

Maximum Tire Width 11″

Page 4 For technical questions, please call 1-888-866-5797. Item 64601

Assembly

Functions

Lever

Foot

Pedal

Pedal Lock

Roller

Handle

Swivel

Caster

Right

Arm

Left

Arm

Locking

Swivel

Caster

Roller

Figure A

Assembly Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document

including all text under subheadings therein before set up or use of this product.

1. Assemble on a flat, level, hard and smooth surface.

2. Attach two Locking Swivel Casters to the

side of the frame that has the foot pedal

3. Attach two Swivel Casters to the other side.

Locking

Swivel Caster

Swivel

Caster

Figure B

4. When attaching Casters, make sure the square

bolts seat inside the square openings.

Square

Opening

Caster

Lock

Nut

Square

Bolt

Figure C

5. Thread Lock Nuts onto all four

Caster bolts, securing tightly.

Page 5For technical questions, please call 1-888-866-5797.Item 64601

Operating Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this

manual including all text under subheadings therein before set up or use of this product.

1. Release the Foot Pedal by depressing it and

disengaging the Pedal Lock. Push Lever

down and unlock Locking Swivel Casters.

2. Lifting Tire:

a. With the Lever in the down position, roll Dolly in

front of tire, spread Arms apart, then push Dolly

forward so that Rollers are on either side of tire.

Figure D: Putting Dolly Around Tire

(Lever in Down Position)

b. Move the Lever to the up position, then pump the

Foot Pedal until the tire is just lifted off the ground.

Figure E: Lever in Up Position

WARNING! Be ready for any movement the vehicle

may make when the other tire(s) come off the ground.

Ensure that you have sufficient assistance and

manpower to safely guide and control the vehicle.

3. Repeat 2. Lifting Tire for the other

tire(s). Use only in pairs.

WARNING! Stay clear of any sloping areas or entry

ramps, however shallow they may appear. Sufficient

space should be allowed between the side of the

vehicle and an adjacent wall for the vehicle to be

withdrawn from its location in a sideways manner.

4. Once vehicle is in place, lock all

Locking Swivel Casters.

5. Lowering Tire:

a. Unlock Locking Swivel Casters.

b. Move the Lever to the down position, then

depress and release the Foot Pedal.

c. Once tire is on the ground, spread

Arms and remove Dolly.

d. Push arms together, then depress Foot Pedal

all the way and secure with Pedal Lock.

Inspection, Maintenance, And Cleaning

Procedures not specifically explained in this manual must

be performed only by a qualified technician.

TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:

Do not use damaged equipment. If abnormal noise or vibration

occurs, have the problem corrected before further use.

1. BEFORE EACH USE, inspect the general

condition of the Wheel Dolly. Check for:

• broken, cracked, or bent parts,

• loose or missing parts,

• and any condition that may affect the

proper operation of the product.

2. AFTER EVERY USE, wipe with a clean cloth. Then,

store the Wheel Dolly in a safe, dry location out of

reach of children and other non-authorized people.

3. PERIODICALLY:

• lubricate the Casters and

Foot Pedal pivot with oil.

• put Lever in down position, spread arms

apart and lightly grease the notched tube.

Page 6 For technical questions, please call 1-888-866-5797. Item 64601

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM

IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR

MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS

QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE

ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY

STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND

LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY

ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS

THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Parts List and Assembly Diagram

Parts List

Part Description Qty

1 Screw 2

2 Lock Washer 2

3 Cap 2

4 Roller 2

5 Swivel Caster 2

6 Locking Swivel Caster 2

7 Lock Nut 4

8 Nut 1

9 Washer 1

10 Right Arm 1

11 Pedal Lock 1

12 Foot Pedal 1

13 Front Pawl 1

14 Spring 1

Part Description Qty

15 Pin 1

16 Lever 1

17 Press Plate 1

18 Bolt 1

19 Back Pawl 1

20 Spring 1

21 Riveting Plate 1

22 Limit Plate 1

23 Pin 1

24 Cotter Pin 1

25 Spring 1

26 Washer 1

27 Left Arm 1

28 Rubber Pad 1

Record Serial Number Here:

Note: If product has no serial number, record month and year of purchase instead.

Note: Some parts are listed and shown for illustration purposes only, and

are not available individually as replacement parts.

Page 7For technical questions, please call 1-888-866-5797.Item 64601

Assembly Drawing

3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • 1-888-866-5797

Limited 90 Day Warranty

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards,

and warrants to the original purchaser that this product is free from defects in materials and workmanship for the

period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly,

to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper

installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries

to persons or property, or for incidental, contingent, special or consequential damages arising from the use of

our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the

above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with transportation charges

prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.

If our inspection verifies the defect, we will either repair or replace the product at our election or we may

elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will

return repaired products at our expense, but if we determine there is no defect, or that the defect resulted

from causes not within the scope of our warranty, then you must bear the cost of returning the product.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

Daytona 64601 Owner's manual

Brand: Daytona

Model: 64601

Type: Owner's manual

This manual is also suitable for

Item 64601

Download PDF

report

Daytona 64601 Owner's manual

This manual is also suitable for

Daytona 64601 Owner's manual

Related papers

Other documents