SKYDANCE R11_WT1 User manual

SKYDANCE
Brand
SKYDANCE
Model
R11_WT1
Type
User manual
Operation temperature
Environment
Ta: -30
O
C ~ +55
O
C
Technical Parameters
Safety and EMC
EMC standard (EMC) ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Radio Equipment(RED) ETSI EN 300 328 V2.2.2
Certication CE,EMC,LVD,RED
EN 62368-1:2020+A11:2020
Safety standard(LVD)
1
User Manual Ver 1.0.0
Features
30m(Barrier-free space)
Dimming signal
Remote distance
Working current ＜5mA
Output signal RF(2.4GHz)
Working voltage 3VDC(CR2032)
Standby time
LED Remote’s Input and Output
Standby current ＜10μA
＜1 years
Tuya APP + RF + Push Dim
Model No.: WT1+R11
WiFi & RF LED Dimmer Kit
Tuya APP cloud control 2 Channels/Push-Dim/DC power socket input/Wireless remote control/
● Used for control single color LED strip.
●DC power socket input and 2 channel constant voltage output.
● Tuya APP cloud control, support on/off, color temperature and brightness adjust,
delay turn on/off light, timer run, scene edit function.
●Compatibility with RF 2.4G dimming remote control.
●User need set DIM light type by press key before Tuya APP network connection.
●Connect with external push switch to achieve on/off and 0-100% dimming function.
● Light on/off fade time 3s selectable.
Input and Output
Output power 2 x (60-180)W
Output voltage 2 x (12-36)VDC
Output current 2CH,5A/CH
Input voltage 12-36VDC
LVD RED
Mechanical Structures and Installations
36.00 mm
139.00 mm
11.00 mm
Back holder with magnet
Remote function
Bright touch slide
On/Off
LED indicator
1%
100%
50%
Output LED +
Output LED -
Output LED -
Push switch
Push switch common
Power input +
Power input -
LED indicator
Match/Set key
Installation rack
DC socket input
Installation rack +
-
+
INP UT
12-24VD C
MAT CH/ SET
RU N
CW
W
WW
W
LED O UTP UT
Push Dim
114.00 mm
38.00 mm
20.00 mm
PWM Frequency
Dimming curve
2000Hz (default)
Logarithmic
2
User Manual Ver 1.0.0
Dimming remote
Pressand hold match/setkeyfor8s,until the RUN LED indicator turn white, then release, the controller will becomeDIMtype, then do smart cong by tuya APP,
or short press match key to match with dimming RF remote.
+
IN PUT
12-2 4VD C
Single color LED strip
+
Wiring Diagram
Power Adapter
12-36VDC
MATC H/S ET
RUN
+
-
Single color LED strip
+
CW
W
WW
W
LE D OUT PUT
Push Dim
Push Switch
Note:
1. User can connect constant voltage power supply or power adapter as power input.
2. Switch off the power, then switch on power, repeat again. Immediately short press match key 3 times, the light on/off time will change between 3s and 0.5s.
Systemwiring
Wiredconnection
Wirelessconnection
DIM
WiFiRouter
MobilePhone
RFRemote
15m
30m
DIM
Note:
1. heT abovedistanceismeasuredinspacious(noobstacle)environment,
Pleaserefertotheactualtestdistancebeforeinstallation.
2.PleasecheckiftheWiFi routernetin2.4Gband, the5Gband isnotavailable,
and donothideyourrouternetwork.
3. PleasekeepthedistancebetweenWT1 devicesandrouterclose, andcheckthe
WiFisignals.
WiFi
3G/4G/5G Tuya Cloud
WiFi
WT1
WT1
Push Dim
ON/OFF
Turn on at 100% or 10% (night light) and vice-versa
Dimming UP/DOWN
Dimming UP/DOWN
Click
Double Click
Long press(>1s) from OFF
Long press(>1s) from ON
DIM
Single color
Match remote control
Use the WT1’s Match key
Match:
Short press match key of WT1, immediately press on/off key
on the remote.
The LED indicator fast flash a few times means match is successful.
Use Power Restart
Match:
Switch off the power of WT1, then switch on power, repeat again.
Immediately short press on/off key 3 times on the remote.
The light blinks 3 times means match is successful.
Delete:
Switch off the power of WT1, then switch on power, repeat again.
Immediately short press on/off key 5 times on the remote.
The light blinks 5 times means all matched remotes were deleted.
Delete:
Press and hold match key of WT1 for 5s to delete all match,
The LED indicator fast flash a few times means all matched remotes
were deleted.
End user can choose the suitable match/delete ways. Two options are offered for selection:
Tuya APP network connection
Push twice Match/Set key fastly, or when press and hold Match/Set key for 8s to set DIM light type:
Clear previous network connection, enter Smart config mode, the purple LED indicator flash fastly,
the output LED will flash 10 times.
Press and hold Match/Set key for 5s:
Clear previous network connection, enter AP config mode, the purple LED indicator flash slowly.
If smart config failed, please try AP config.
Repeat power on and off for 5 consecutive times, also clear previous network connection, enter Smart
config mode, the output LED will flash 10 times.
If Tuya APP network connection succeed, the RUN LED indicator will stop flash purple, and turn
corresponding light type color (White: DIM). and in Tuya APP, you can find DIM device.
Tuya APP interface operation:
Touch brightness slide to adjust brightness.
DIM
  • Page 1 1
  • Page 2 2

SKYDANCE R11_WT1 User manual

SKYDANCE
Brand
SKYDANCE
Model
R11_WT1
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents