•Fitting: Steel and PVC
•Lamptype:1 x R80 E27maximum 60W
•Protectionagainstelectricshock: Class 2. Does not require earth connection.
•IPRating: IP20. Protected against solid foreign objects of 12.5mm Ø and greater,
not protected against water.
•Notforoutdooruse.
•MaximumAmbienttemperaturerange: 20ºC - 40ºC
•Dimensions: (H) 365mm X (Ø)130mm
•Feature: On / off switch
•Beforeinstallationalwaysensurethepowersupplyisturnedoff.
•Unpackandplacetheluminaireonaatsurface.
•Insertthelampintothelampholder.
•Plugintotheelectricaloutlet.
•Toswitchthedesklampon:SettheOn/Offswitchto(ON)position.
•Toswitchthedesklampoff:SettheOn/Offswitchto(OFF)position.
•BeforeunpluggingthedesklampfromthepowersupplysettheOn/Offswitchto
(OFF) position.
•Beforereplacingthelampalwaysunplugthedesklampfromthepowersupply
and allow to cool down.
•Ensurethatthecorrectlamptypeandwattageistted.
T30W/T30B-attachments:
Iftheexternalexiblecableorcordofthisluminaireisdamaged,itshouldbe
exclusivelyreplacedbythemanufacturerorhisserviceagentorasimilarqualied
person in order to avoid a hazard. To ensure that you get maximum longevity and
maximum use out of your luminaire, please observe the following safety
instructions.
Electrical products can cause death, injury, or damage to property. Installation
oftheluminairemustbecarriedoutbyaqualiedelectrician,inaccordance
withSANS10142.Oncompletionofinstallation,ensurethattheCerticateof
Compliance is updated.
•Beforeconnectingthisluminaire,ensurethatvoltageindicatedontheratinglabel
corresponds with the mains voltage in your home.
•Whenchangingthelamp,ensurethatthepoweristurnedoff.
•Thisluminaireischeckedinfullforconformitytothequalitystandardsandsafety
requirements.
•Themanufacturer/supplierisnotresponsibleforanydamageofpropertiesand
persons, caused by the incorrect use or installation of the luminaire.
•Shouldyoubeunsureofhowtoinstallthisluminairecorrectly,pleaseconsulta
professional electrician or your supplier for assistance.
•Ensureallitems/components,threadsandscrewsaretightlysecured.
IMPORTANT:
•Tamperingwiththisluminaire,I.E.Usingsiliconsealersorincorrectcabling,will
invalidate your warranty.
•Pleasecheckwhethertheconnectionofthepowercordissafeandreliablebefore
installation.
•Alwaysensurethatthemainssupplyvoltageiscorrect.
•Alwaysreplacethelampwithoneofanidenticalrating.
•Ensurethatyoudonotplacetheluminairenearanycombustiblematerialsand/
or surfaces.
SPECIFICATIONSIMPORTANT SAFEGUARDS
INSTALLATION
CLEANING
•Beforecleaningalwaysensurethepowersupplyisturnedoff.
•Donotimmersetheluminaireinwater.
•Noabrasiveproducts,solvents,detergentmaybeusedtocleanthisluminaire.
•Ensurethatthettingdoesnotcomeincontactwithcorrosivechemicals,etc.