Ranger design 3320-GS Installation guide

Brand
Ranger design
Model
3320-GS
Category
Wall & ceiling mounts accessories
Type
Installation guide
INSTALLATION GUIDE
3310-GS
3320-GS
Composite Partition
GMC Savana
For technical support, contact us at 1-800-565-5321 3310-GS & 3320-GS Installation Guide | REV. A | Page 2
REQUIRED ITEMS
2
PERSONS
q Cordless Driver
q Cordless Impact
q Cordless Drill
q Marker
q Plusnut Tool
q 3/8" Driver Bit
q 7/16" Socket
q 1/2" Socket
q 3/8" Drill Bit
q 1.1 Setup....................................................................................................................................................
q 1.1.1 Unpack components; compare with the bill of materials................................................................
q 1.1.2 Verify all parts are present...............................................................................................................
q 1.1.3 Identify the assembly and installation fastener bags......................................................................
q 1.2 Partition Preparation.............................................................................................................................
q 1.2.1 Install mounting track ......................................................................................................................
3
3
3
4
5
5
Phase 1 - Assembly
q 2.1 Tips on how to attach a plusnut...........................................................................................................
q 2.1.1 Attach plusnut using plusnut gun....................................................................................................
q 2.1.2 Attach plusnut using 6490 plusnut tool..........................................................................................
q 2.2 Partition Installation..............................................................................................................................
q 2.2.1 Install plusnuts to factory provided holes ......................................................................................
q 2.2.2 Install roof bracket .........................................................................................................................
q 2.2.3 Floor bracket installation preparation ............................................................................................
q 2.2.4 Install oor bracket ........................................................................................................................
q 2.2.5 Install composite partition to oor and roof bracket ......................................................................
6
6
6
7
7
7
8
9
10
Phase 2 - Installation
WARNING
Before the installation, carefully read the supplied installation guide to avoid possible injuries and damages resulting from incorrect
installation. Always keep the installation guide in an accessible location at all times for reference during installation.
Installers must always wear appropriate safety gear during installation. This may include but is not limited to gloves, steel toed shoes,
and safety glasses.
Drilling is required to complete this install. Before drilling, ensure that you will not hit any critical parts of the vehicle like the gas tank,
wiring harness, or hose. Consult OEM vehicle or documentation as necessary. When drilling, use a drill collar to reduce risk of damage
to the vehicle.
This installation guide provides general installation instructions and best practices. However, various vehicles and
product install locations may require additional steps. It is the installers responsibility to ensure the install is safe and secure. For further
questions please contact us at 1-800-565-5321.
For technical support, contact us at 1-800-565-5321 3310-GS & 3320-GS Installation Guide | REV. A | Page 3
PHASE 1 – ASSEMBLY
1.1 SETUP
1.1.2 Verify all parts are present.
Item No. Description Qty.
30-0950 or 30-9510 Composite Partition GS 1
30-410 Roof Bracket 1
30-411 Floor Bracket 1
70-638 Mounting Track 56" 1
96-3059 Customer Install Fastener Kit 1
94-3059 Customer Assembly Fastener Kit 1
1.1.1 Unpack components; compare with the bill of materials.
70-638
30-0950
30-410
30-411
30-9510
For technical support, contact us at 1-800-565-5321 3310-GS & 3320-GS Installation Guide | REV. A | Page 4
1.1.3 Identify the Assembly and Installation fastener bags.
94-3059 Hardware Assembly
Hardware Installation96-3059
#90-110 Hex Bolt 1/4"-20 × 3/4"
#98-112 Flat Washer
#94-112 Serrated Nut
7×7×
7×7×
Serrated Nut
1/4"-20
ZINC
# 94-112
7×7×
Flat Washer
1/4", 3/4" OD
ZINC
# 98-112
Hex Bolt
1/4"-20 × 3/4"
GR-5 ZINC
# 90-110
7×7×
Flat Washer
1/4", 3/4" OD
ZINC
# 98-112
4×4×
Plusnut # 94-130
4×4×
8×8×
#90-486 Carriage Bolt 5/16" × 3/4"
#98-122 Lock Washer
#98-116 Flat Washer
# 90-114
Hex Bolt
1/4"-20 × 1"
GR-5 ZINC
4×4×
# 98-118
Lock Washer
Regular 1/4"
ZINC
4×4×
Flat Washer
5/16", 7/8" OD
ZINC
# 98-116
8×8×
# 98-122
Lock Washer
Regular 5/16"
ZINC
8×8×
Hex Nut
5/16"-18
ZINC
# 94-104
8×8×
# 90-486
8×8× Carriage Bolt
5/16"-18 × 3/4"
GR-5 ZINC
#94-130 Plusnut
#94-104 Hex Nut
4×4×
#90-114 Hex Bolt 1/4" × 1"
#98-118 Lock Washer
#98-112 Flat Washer
For technical support, contact us at 1-800-565-5321 3310-GS & 3320-GS Installation Guide | REV. A | Page 5
PHASE 1 – ASSEMBLY
1.2 PARTITION PREPARATION
1.2.1 Install mounting track.
TOOLS
q Cordless Impact
q 7/16" Socket
HARDWARE USED
7×
#90-110 Hex Bolt 1/4" × 3/4"
#98-112 Flat Washer
#94-112 Serrated Nut
70-638
RECOMMENDED TORQUE SPEC: 7 LBS • FT
For technical support, contact us at 1-800-565-5321 3310-GS & 3320-GS Installation Guide | REV. A | Page 6
PHASE 2 – INSTALLATION
2.1 TIPS ON HOW TO ATTACH A PLUSNUT
FORWARD REVERSE
TIPS: Put the plusnut on the plusnut gun, then attach the plusnut in the hole by turning the gun forward until the
plusnut locks, then remove the gun by turning in reverse.
2.1.1 Attach the plusnut using the plusnut gun.
2.1.2 Attach the plusnut using the 6490 plusnut tool.
6490 HARDWARE USED
Flat washer 1/4"
Flat washer 1/4" BS × 3/4" OD
TOOLS
q Cordless Impact
q 7/16" Socket
q 9/16" Wrench
TIPS STEP 1:
Assemble the 6490 plusnut tool with the hardware needed,
plusnut and the 9/16" wrench as shown.
FORWARD REVERSE
TIPS STEP 2:
Attach the plusnut in the hole by turning
the bolt forward using an impact with a
7/16" socket until the plusnut locks, then
remove the bolt by turning the impact in
reverse.
NOTE: The hardware used for the 6490 plusnut tool is not included in the fastener bag.
The 6490 plusnut tool can be ordered separately upon demand at no charge.
For technical support, contact us at 1-800-565-5321 3310-GS & 3320-GS Installation Guide | REV. A | Page 7
2.2.1 Install plusnuts to factory provided holes.
#94-130 Plusnut .250
HARDWARE USED
4×
TOOLS
q Plusnut Tool
q Cordless Drill
q 3/8" Drill Bit
• Drill using a 3/8" drill bit on the factory
provided holes to accomodate plusnuts.
• Attach plusnuts in the 4 holes as instructed
in page 6.
2.2.2 Install roof bracket.
4×4×
#90-114 Hex Bolt 1/4" × 1"
#98-118 Lock Washer
#98-110 Flat Washer
RECOMMENDED TORQUE SPEC: 7 LBS • FT
2.2 INSTALLATION
30-410
For technical support, contact us at 1-800-565-5321 3310-GS & 3320-GS Installation Guide | REV. A | Page 8
2.2.3 Floor bracket installation preparation.
Roll up oor mat to reveal factory provided D-Rings.
Remove D-Rings and put aside for later use.
For technical support, contact us at 1-800-565-5321 3310-GS & 3320-GS Installation Guide | REV. A | Page 9
2.2.4 Reinstall D-rings over oor bracket.
30-411
For technical support, contact us at 1-800-565-5321 3310-GS & 3320-GS Installation Guide | REV. A | Page 10
2.2.5 Install composite partition to oor and roof bracket.
HARDWARE USED
4×
#90-486 Carriage Bolt 5/16" × 3/4 "
#98-116 Flat Washer
#98-118 Serrated Nut
#98-118 Lock Washer
HARDWARE USED
4×
#90-486 Carriage Bolt 5/16" × 3/4 "
#98-116 Flat Washer
#98-118 Serrated Nut
#98-118 Lock Washer
“You have successfully installed your Partition, thank you for doing business with us.”
For any feedback or suggestions, you may have, please contact: [email protected]
RECOMMENDED TORQUE SPEC: 11 LBS • FT
RECOMMENDED TORQUE SPEC: 11 LBS • FT
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

Ranger design 3320-GS Installation guide

Brand
Ranger design
Model
3320-GS
Category
Wall & ceiling mounts accessories
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents