RAMPAGE PRODUCTS 5307 Installation guide

Rampage Products 9225 Stellar Ct Ste “C”, Corona, CA 92883 Phone: (951) 277-4949 Fax: (951) 277-2295

www.rampageproducts.net

Installation Instructions

Diamond Brite Taillight Kit

Part # 5307

Step # 1

Remove taillight lens, 4 screws

remove Bulbs, (note there are two

dierent bulbs) and Center Divider;

it is not necessary to remove the

housing from the vehicle.

Step # 2

Insert new reector,

line up tabs on both

sides of housing,

reector may be snug,

but will slide in tightly.

Step # 3

Install bulbs and the new lens

You’re done, Enjoy your

new look.