wattstopper DSW-301-W Product information

wattstopper
Brand
wattstopper
Model
DSW-301-W
Category
Motorcycle Accessories
Type
Product information

The wattstopper DSW-301-W is a low-voltage, line-powered occupancy sensor that combines passive infrared (PIR) technology with ultrasonic technology. It is designed for use in commercial applications, such as offices, schools, and hospitals. The DSW-301-W can be used to control lighting, HVAC, and other electrical loads.

The DSW-301-W has a number of features that make it a versatile and effective occupancy sensor. These features include:

  • PIR technology: The DSW-301-W uses PIR technology to detect the presence of people in a space. This technology is able to detect even small movements, making it ideal for use in areas where people are not constantly moving around.

The wattstopper DSW-301-W is a low-voltage, line-powered occupancy sensor that combines passive infrared (PIR) technology with ultrasonic technology. It is designed for use in commercial applications, such as offices, schools, and hospitals. The DSW-301-W can be used to control lighting, HVAC, and other electrical loads.

The DSW-301-W has a number of features that make it a versatile and effective occupancy sensor. These features include:

  • PIR technology: The DSW-301-W uses PIR technology to detect the presence of people in a space. This technology is able to detect even small movements, making it ideal for use in areas where people are not constantly moving around.
4
MULTI-WAY
The Multi-Way capability is available on all models. Sensors can easily
be wired together for convenient control of a common load. When wiring
this way, only use 300 series sensors. Multi-Way in 300 series is not
compatible with prior sensor models.
The following princlples apply for Multi-Way:
• All units should be on the same phase.
• All units can see each other’s push button events and respond
accordingly.
• All units can see each other’s PIR trigger event. The response will
be determined by the Light Level setting and/or conditions of the
space of the detecting sensor.
• The time delay for all units is defined by the unit with the smallest
time delay.
NOTE: Button 1 on any sensor controls load #1,
and button 2 on any sensor controls load #2.
OPTIONAL NEUTRAL WIRING
For applications requiring neutral wiring, remove tab as shown to expose terminals for wiring.
NOTE: When used in a multi-way application, all devices in that space must be wired using
the same method of either with neutral or without neutral.
Breakaway
tab
Optional neutral
terminals behind
breakaway tab
8" flying leads for line, load, ground
and multi-way connections
DSW-302 shown.
The DSW-301 does
not include these
two leads
Yellow
Red
Green
Black
Brown
Blue
Load
Red
Black
Neutral
Line
Green Neutral
(optional)
Ground
Yellow
RedBlack
Neutral
Line
Green
Ground
Blue
Primary
Load
Secondary
Load
Neutral
(optional)
Brown
Yellow
RedBlack
Neutral
Line 1
Green
Ground
Blue
Primary
Load
Brown Secondary
Load
Line 2
Neutral
Neutral
(optional)
Yellow
DSW-301-347 Wiring DSW-302-347 Bi-Level Wiring DSW-302-347 Dual Circuit Wiring
Black Black
Neutral
Ground
Neutral
(optional)
Line 1
Yellow
Red Primary
Load
Brown Secondary
Load
Neutral
(optional)
Blue Blue
Green
Ground
Green
Red
Brown
Line 2
Neutral
Black Black
Neutral
Neutral
(optional)
Line
Yellow
Red Primary
Load
Brown Secondary
Load
Neutral
(optional)
Ground
Green
Ground
Green
Red
Brown
Blue Blue
Bi-level Wiring
(DSW-302-347 up to 4 sensors)
Two-phase Wiring
Typical Wiring
(DSW-301-347 up to 4 sensors)
Black Load
Red
Black
Neutral
Neutral
(optional)
Line
Neutral
(optional)
Ground
Green
Ground
Green
Yellow
traveler
Yellow
Red
  • Page 1 1

wattstopper DSW-301-W Product information

wattstopper
Brand
wattstopper
Model
DSW-301-W
Category
Motorcycle Accessories
Type
Product information

The wattstopper DSW-301-W is a low-voltage, line-powered occupancy sensor that combines passive infrared (PIR) technology with ultrasonic technology. It is designed for use in commercial applications, such as offices, schools, and hospitals. The DSW-301-W can be used to control lighting, HVAC, and other electrical loads.

The DSW-301-W has a number of features that make it a versatile and effective occupancy sensor. These features include:

  • PIR technology: The DSW-301-W uses PIR technology to detect the presence of people in a space. This technology is able to detect even small movements, making it ideal for use in areas where people are not constantly moving around.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents