Beko BP109C User manual

Portable

Air-conditioner

User Manual

EN FR IT NL

BP109C BP112C BP112H

BP113H BP109AC BP109AH

Please read this user manual rst!

Dear Customer,

Thank you for preferrng a Beko product. We hope that you get the best results

from your product whch has been manufactured wth hgh qualty and state-of-

the-art technology. Therefore, please read ths entre user manual and all other

accompanyng documents carefully before usng the product and keep t as a

reference for future use. If you handover the product to someone else, gve the user

manual as well. Follow all warnngs and nformaton n the user manual.

Meanings of the symbols

Followng symbols are used n the varous secton of ths manual:

Ths product has been produced n envronmentally frendly, modern facltes

Comples wth the WEEE Regulaton. Does not contan PCB.

C

Important nformaton or

useful hnts about usage.

A

Warnng for hazardous

stuatons wth regard to lfe

and property.

Warnng to actons that must

never perform.

B

Warnng for electrc shock.

Warnng for hot surfaces.

Do not cover t.

Ths symbol shows that the

operaton manual should be

read carefully.

Ths symbol shows that a

servce personnel should be

handlng ths equpment wth

reference to the nstallaton

manual.

Ths symbol

shows that ths

applance used

a flammable

refrgerant. If

the refrgerant

s leaked and

exposed to an

external gnton

source, there s

a rsk of fre.

Portable Ar-condtoner / User Manual 3 / 220 EN

Contents

1 Safety awareness 5

2 Name of parts 29

3 Accessores 30

4 Appearance and functon of control panel 31

4.1 Coolng only model (non-reversble). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

4.2 Coolng & Heat pump model (reversble) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

5 Appearance and functon of remote control 33

6 Operaton ntroducton 35

6.1 Before usng . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

6.2 Coolng operaton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

6.3 Dehumdfyng operaton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

6.4 Fan operaton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

6.5 Heatng operaton (ths functon s not avalable for acold-sngle unt) . . . . . . . . . . . . . . . . . . . . . 36

6.6 Tmer operaton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

6.7 Auto swng . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

6.8 Sleep mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

6.9 Water dranage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

6.10 Wreless functon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

6.11 Zone follow functon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

7 Installaton explanatons 39

7.1 Installaton explanatons: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

7.2 Introducton to exhaust hose nstallaton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

7.3 Unversal caulkng kt accessory for moble ar condtoner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

7.4 Use the Hepa 13 lter (only for BP113H model). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

7.5 Water full alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

4 / 220 EN Portable Ar-condtoner / User Manual

Contents

8 Mantenance explanatons 47

8.1 Clean the ar lter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

8.2 Clean the ar-condtoner surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

9 Mantenance 49

10 Troubleshootng 50

11 Socable remark 51

12 Installaton nstructons 52

12.1 F-Gas nstructon. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

13 Specfcatons 53

Portable Ar-condtoner / User Manual 5 / 220 EN

1 Safety awareness

Very mportant

Please do not nstall or use your portable ar condtoner before you

have carefully read ths manual. Please keep ths nstructon manual

for an eventual product warranty and for future reference.

Warnng

Do not use means to accelerate the defrostng process or to clean,

other than those recommended by the manufacturer.

The applance shall be stored n a room wthout contnuously

operatng gnton sources (for example: open flames, an operatng

gas applance or an operatng electrc heater).

Do not perce or burn.

Be aware the refrgerants may not contan an odour.

Applance shall be nstalled, operated and stored n a room wth a

floor area larger than X m2.

Model X (m2)

9000Btu/h, 10000Btu/h,12000Btu/h,13000Btu/h 12

6 / 220 EN Portable Ar-condtoner / User Manual

Warnng (for R290)

Specfc nformaton regardng applances wth R290 refrgerant gas.

•

Thoroughly read all of the warnngs.

•

When defrostng and cleanng the applance, do not use any tools

other than those recommended by the manufacturng company.

•

The applance must be placed n an area wthout any contnuously

sources of gnton (for example: open flames, gas or electrcal

applances n operaton).

•

Do not puncture and do not burn.

•

Ths applance contans Y g (see ratng label back of unt) of R290

refrgerant gas.

•

R290 s a refrgerant gas that comples wth the European drectves

on the envronment. Do not puncture any part of the refrgerant

crcut.

•

If the applance s nstalled, operated or stored n an unventlated

area, the room must be desgned to prevent to the accumulaton of

refrgerant leaks resultng n a rsk of fre or exploson due to gnton

of the refrgerant caused by electrc heaters, stoves, or other

sources of gnton.

•

The applance must be stored n such a way as to prevent

mechancal falure.

•

Indvduals who operate or work on the refrgerant crcut must have

the approprate certfcaton ssued by an accredted organzaton

that ensures competence n handlng refrgerants accordng to a

specfc evaluaton recognzed by assocatons n the ndustry.

1 Safety awareness

Portable Ar-condtoner / User Manual 7 / 220 EN

•

Repars must be performed based on the recommendaton from the

manufacturng company. Mantenance and repars that requre the

assstance of other qualfed personnel must be performed under

the supervson of an ndvdual specfed n the use of flammable

refrgerants.

General safety nstructon

1. The applance s for ndoor use only.

2. Do not use the unt on a socket under repars or not nstalled

properly.

3. Do not use the unt, follow these precautons:

A: Near to source of fre.

B: An area where ol s lkely to splash.

C: An area exposed to drect sunlght.

D: An area where water s lkely to splash.

E: Near a bath, a laundry, a shower or a swmmng pool.

4. Never nsert your fngers, rods nto the ar outlet. Take specal care

to warn chldren of these dangers.

5. Keep the unt upward whle transport and storage, for the

compressor locates properly.

6. Before cleanng the ar-condtoner, always turn off or dsconnect

the power supply.

7. When movng the ar-condtoner, always turn off and dsconnect

the power supply, and move t slowly.

1 Safety awareness

8 / 220 EN Portable Ar-condtoner / User Manual

1 Safety awareness

8. To avod the possblty of fre dsaster, the ar-condtoner shall

not be covered.

9. All the ar-condtoner sockets must comply wth the local

electrc safety requrements. If necessary, please check t for the

requrements.

10. Chldren should be supervsed to ensure that they do not play wth

the applance.

11. If the supply cord s damaged, t must be replaced by the

manufacturer, ts servce agent or smlarly qualfed persons n

order to avod a hazard.

12. Ths applance can be used by chldren aged from 8 years and

above and persons wth reduced physcal, sensory or mental

capabltes or lack of experence and knowledge f they have been

gven supervson or nstructon concernng use of the applance n

a safe way and understand the hazards nvolved. Chldren shall not

play wth the applance. Cleanng and user mantenance shall not

be made by chldren wthout supervson.

13. The applance shall be nstalled n accordance wth natonal wrng

regulatons.

14. Detals of type and ratng of fuses: T, 250V AC, 2A or hgher.

15. Contact authorzed servce techncan for repar or mantenance of

ths unt.

16. Do not pull, deform, or modfy the power supply cord, or mmerse

t n water. Pullng or msuse of the power supply cord can result n

damage to the unt and cause electrcal shock.

17. Complance wth natonal gas regulatons shall be observed.

Portable Ar-condtoner / User Manual 9 / 220 EN

1 Safety awareness

18. Keep ventlaton openngs clear of obstructon.

19. Any person who s nvolved wth workng on or breakng nto

arefrgerant crcut should hold a current vald certfcate from

anndustry-accredted assessment authorty, whch authorzes

ther competence to handle refrgerants safely n accordance wth

an ndustry recognzed assessment specfcaton.

20. Servcng shall only be performed as recommended by the

equpment manufacturer. Mantenance and repar requrng the

assstance of other sklled personnel shall be carred out under

the supervson of the person competent n the use of flammable

refrgerants.

21. Do not operate or stop the unt by nsertng or pullng out De power

plug, t may cause electrc shock or fre due to heat generaton.

22. Unplug the unt f strange sounds, smell, or smoke comes from t.

23. Ths applance s not ntended for use by persons (ncludng

chldren) wth reduced physcal, sensory or mental capabltes, or

lack of experence and knowledge, unless they have been gven

supervson or nstructon concernng use of the applance by

aperson responsble for ther safety.

24. If the supply cord s damaged, t must be replaced by the

manufacturer or ts agent or smlarly qualfed person n order to

avod hazard.

25. The applance shall state the nsulaton of a resdual current devce

(RCD) havng rated resdual operatng current not exceedng

30mA.

10 / 220 EN Portable Ar-condtoner / User Manual

1 Safety awareness

26. Ths applance s ntended to be used n household and smlar

applcatons such as

–

Staff ktchen areas n shops, offces and other workng

envronments;

–

farm houses;

–

by clents n hotels, motels and other resdental type

envronments;

–

bed and breakfast type envronments;

The applance shall state the nsulaton of a resdual current

devce (RCD) havng rated resdual operatng current not

exceedng 30mA.

27. Impedancedeclaration

Theseappliancescanbeconnectedonlytoasupplywith

systemimpedancenomorethan0.367Ω.Incasenecessary,

pleaseconsultyoursupplyauthorityforsystemimpedance

information.

Portable Ar-condtoner / User Manual 11 / 220 EN

1 Safety awareness

C

Note:

•

If any parts damage, please contact the dealer or a

desgnated repar shop;

•

In case of any damage, please turn off the ar swtch,

dsconnect the power supply, and contact the dealer or

adesgnated repar shop;

•

In any case, the power cord shall be frmly grounded.

•

To avod the possblty of danger, f power cord s

damaged, please turn off the ar swtch and dsconnect

the power supply. It must be replaced from the dealer or

adesgnated repar shop.

12 / 220 EN Portable Ar-condtoner / User Manual

Warnngs (for usng R290 refrgerant only)

1. General nstructons

1.1 Checks to the area

Pror to begnnng work on systems contanng flammable

refrgerants, safety checks are necessary to ensure that the rsk

of gnton s mnmzed. For repar to the refrgeratng system, the

followng precautons shall be compled wth pror to con-ductng

work on the system.

1.2 Work procedure

Work shall be undertaken under a controlled procedure so as to

mnmze the rsk of a flammable gas or vapour beng present whle

the work s beng performed.

1.3 General work area

All mantenance staff and others workng n the local area shall be

nstructed on the nature of work beng carred out. Work n confned

spaces shall be avoded. The area around the workspace shall be

sectoned off. Ensure that the condtons wthn the area have been

made safe by control of flammable materal.

1.4 Checkng for presence of refrgerant

The area shall be checked wth an approprate refrgerant

detector pror to and durng work, to ensure the techncan s

aware of potentally flammable atmospheres. Ensure that the leak

detecton equpment beng used s sutable for use wth flammable

refrgerants, .e. nonsparkng, adequately sealed or ntrnscally safe.

1 Safety awareness

Portable Ar-condtoner / User Manual 13 / 220 EN

1.5 Presence of fre extngusher

If any hot work s to be conducted on the refrgeraton equpment or

any assocated parts, proprate fre extngushng equpment shall

be avalable to hand. Have a dry powder or CO2 fre extngusher

adjacent to the chargng area.

1.6 No gnton sources

No person carryng out work n relaton to a refrgeraton system

whch nvolves exposng any ppe work that contans or has

contaned flammable refrgerant shall use any sources of gnton

n such a manner that t may lead to the rsk of fre or exploson.

Allpossble gnton sources, ncludng cgarette smokng, should

be kept suffcently far away from the ste of nstallaton, reparng,

removng and dsposal, durng whch flammable refrgerant can

possbly be released to the surroundng space. Pror to work takng

place, the area around the equpment s to be surveyed to make sure

that there are no flammable hazards or gnton rsks. “No Smokng”

sgns shall be dsplayed.

1.7 Ventlated area

Ensure that the area s n the open or that t s adequately ventlated

before breakng nto the system or conductng any hot work.

Adegree of ventlaton shall contnue durng the perod that the

work s carred out. The ventlaton should safely dsperse any

released refrgerant and preferably expel t externally nto the

atmosphere.

1 Safety awareness

14 / 220 EN Portable Ar-condtoner / User Manual

1.8 Checks to the refrgeraton equpment

Where electrcal components are beng changed, they shall be ft

for the purpose and to the correct specfcaton. At all tmes the

manufacturer’s mantenance and servce gudelnes shall be followed.

If n doubt consult the manufacturer’s techncal department for

assstance.The followng checks shall be appled to nstallatons usng

flammable refrgerants: the charge sze s n accordance wth the

room sze wthn whch the refrgerant contanng parts are nstalled;

the ventlaton machnery and outlets are operatng adequately and

are not obstructed; f an ndrect refrgeratng crcut s beng used,

the secondary crcut shall be checked for the presence of refrgerant;

markng to the equpment contnues to be vsble and legble. Markngs

and sgns that are llegble shall be corrected; refrgeraton ppe or

components are nstalled n a poston where they are unlkely to be

exposed to any substance whch may corrode refrgerant contanng

components, unless the components are constructed of materals

whch are nherently resstant to beng corroded or are sutably

protected aganst beng so corroded.

1.9 Checks to electrcal devces

Repar and mantenance to electrcal components shall nclude

ntal safety checks and component nspecton procedures. If afault

exsts that could compromse safety, then no electrcal supply

shall be connected to the crcut untl t s satsfactorly dealt wth.

If the fault cannot be corrected mmedately but t s necessary to

contnue operaton, an adequate temporary soluton shall be used.

Ths shall be reported to the owner of the equpment so all partes

are advsed.

1 Safety awareness

Portable Ar-condtoner / User Manual 15 / 220 EN

Intal safety checks shall nclude: that capactors are dscharged: ths

shall be done n a safe manner to avod possblty of sparkng; that

there no lve electrcal components and wrng are exposed whle

chargng, recoverng or purgng the system; that there s contnuty

of earth bondng.

2. Repars to sealed components

2.1 Durng repars to sealed components, all electrcal supples shall

be dsconnected from the equpment beng worked upon pror

to any removal of sealed covers, etc. If t s absolutely necessary

to have an electrcal supply to equpment durng servcng, then

a permanently operatng form of leak detecton shall be located

at the most crtcal pont to warn of a potentally hazardous

stuaton.

2.2 Partcular attenton shall be pad to the followng to ensure that

by workng on electrcal components, the casng s not altered

n such a way that the level of protecton s affected. Ths shall

nclude damage to cables, excessve number of connectons,

termnals not made to orgnal specfcaton, damage to seals,

ncorrect fttng of glands, etc. Ensure that apparatus s

mounted securely. Ensure that seals or sealng materals have

not degraded such that they no longer serve the purpose of

preventng the ngress of flammable atmospheres. Replacement

parts shall be n accordance wth the manufacturer’s

specfcatons.

1 Safety awareness

16 / 220 EN Portable Ar-condtoner / User Manual

C

Note: The use of slcon sealant may nhbt the

effectveness of some types of leak detecton equpment.

Intrnscally safe components do not have to be solated

pror to workng on them.

3. Repar to ntrnscally safe components

Do not apply any permanent nductve or capactance loads to the

crcut wthout ensurng that ths wll not exceed the permssble

voltage and current permtted for the equpment n use.

Intrnscally safe components are the only types that can be worked

on whle lve n the presence of a flammable atmosphere. The test

apparatus shall be at the correct ratng. Replace components only

wth parts specfed by the manufacturer. Other parts may result n

the gnton of refrgerant n the atmosphere from a leak.

4. Cablng

Check that cablng wll not be subject to wear, corroson, excessve

pressure, vbraton, sharp edges or any other adverse envronmental

effects. The check shall also take nto account the effects of agng

or contnual vbraton from sources such as compressors or fans.

5. Detecton of flammable refrgerants

Under no crcumstances shall potental sources of gnton be used

n the searchng for or detecton of refrgerant leaks. A halde torch

(or any other detector usng a naked flame) shall not be used.

1 Safety awareness

Portable Ar-condtoner / User Manual 17 / 220 EN

6. Leak detecton methods

The followng leak detecton methods are deemed acceptable

for systems contanng flammable refrgerants. Electronc leak

detectors shall be used to detect flammable refrgerants, but

the senstvty may not be adequate, or may need recalbraton.

(Detecton equpment shall be calbrated n a refrgerant-free

area.) Ensure that the detector s not a potental source of gnton

and s sutable for the refrgerant used. Leak detecton equpment

shall be set at a percentage of the LFL of the refrgerant and shall

be calbrated to the refrgerant employed and the approprate

percentage of gas (25% maxmum) s confrmed. Leak detecton

fluds are sutable for use wth most refrgerants but the use of

detergents contanng chlorne shall be avoded as the chlorne may

react wth the refrgerant and corrode the copper ppe-work. If a

leak s suspected, all naked flames shall be removed/extngushed.

If a leakage of refrgerant s found whch requres brazng, all of

the refrgerant shall be recovered from the system, or solated (by

means of shut off valves) n a part of the system remote from the

leak. Oxygen free ntrogen (OFN) shall then be purged through the

system both before and durng the brazng process.

1 Safety awareness

18 / 220 EN Portable Ar-condtoner / User Manual

7. Removal and evacuaton

When breakng nto the refrgerant crcut to make repars – or for any

other purpose – con-ventonal procedures shall be used.However,

t s mportant that best practce s followed snce flammablty s a

consderaton. The followng procedure shall be adhered to: remove

refrgerant; purge the crcut wth nert gas; evacuate; purge agan

wth nert gas; open the crcut by cuttng or brazng.The refrgerant

charge shall be recovered nto the correct recovery cylnders. The

system shall be “flushed” wth OFN to render the unt safe. Ths

process may need to be repeated several tmes.Compressed ar or

oxygen shall not be used for ths task. Flushng shall be acheved by

breakng the vacuum n the system wth OFN and contnung to fll

untl the workng pressure s acheved, then ventng to atmosphere,

and fnally pullng down to a vacuum. Ths process shall be repeated

untl no refrgerant s wthn the system. When the fnal OFN charge

s used, the system shall be vented down to atmospherc pressure to

enable work to take place.Ths operaton s absolutely vtal f brazng

operatons on the ppework are to take place.

Ensure that the outlet for the vacuum pump s not close to any

gnton sources and there s ventlaton avalable.

8. Chargng procedures

In addton to conventonal chargng procedures, the followng

requrements shall be followed.

-

Ensure that contamnaton of dfferent refrgerants does not occur

when usng chargng equpment. Hoses or lnes shall be as short as

possble to mnmse the amount of refrgerant contaned n them.

1 Safety awareness

Portable Ar-condtoner / User Manual 19 / 220 EN

-

Cylnders shall be kept uprght.

-

Ensure that the refrgeraton system s earthed pror to chargng

the system wth refrgerant.

-

Label the system when chargng s complete (f not already).

-

Extreme care shall be taken not to overfll the refrgeraton

system.

Pror to rechargng the system t shall be pressure tested wth OFN.

The system shall be leak tested on completon of chargng but pror

to commssonng. A follow up leak test shall be carred out pror to

leavng the ste.

9. Decommssonng

Before carryng out ths procedure, t s essental that the techncan

s completely famlar wth the equpment and all ts detal. It s

recommended good practce that all refrgerants are recovered

safely. Pror to the task beng carred out, an ol and refrgerant

sample shall be taken n case analyss s requred pror to re-use of

reclamed refrgerant. It s essental that electrcal power s avalable

before the task s commenced.

a) Become famlar wth the equpment and ts operaton.

b) Isolate system electrcally.

c) Before attemptng the procedure ensure that: mechancal

handlng equpment s avalable, f requred, for handlng

refrgerant cylnders; all personal protectve equpment s

avalable and beng used correctly; the recovery process

s supervsed at all tmes by a competent person; recovery

equpment and cylnders conform to the approprate standards.

1 Safety awareness

20 / 220 EN Portable Ar-condtoner / User Manual

d) Pump down refrgerant system,f possble.

e) If a vacuum s not possble, make a manfold so that refrgerant

can be removed from varous parts of the system.

f) Make sure that cylnder s stuated on the scales before

recovery takes place.

g) Start the recovery machne and operate n accordance wth

manufacturer’s nstructons.

h) Do not overfll cylnders. (No more than 80 % volume lqud

charge).

) Do not exceed the maxmum workng pressure of the

cylnder,even temporarly.

j) When the cylnders have been flled correctly and the process

completed, make sure that the cylnders and the equpment

are removed from ste promptly and all solaton valves on the

equpment are closed off.

k) Recovered refrgerant shall not be charged nto another

refrgeraton system unless t has been cleaned and checked.

10. Labellng

Equpment shall be labelled statng that t has been de-

commssoned and empted of refrgerant.The label shall be dated

and sgned.

Ensure that there are labels on the equpment statng the

equpment contans flammable refrgerant.

1 Safety awareness

Page is loading ...

Beko BP109C User manual

Beko BP109C User manual

in other languages

Related papers

Other documents