Cincoze GP-3000 User manual

Embedded GPU Computer

9/8th Gen Intel® Xeon®/Core™ Modular GPU Computer, Supports

Dual Full-length GPU Expansion Up to 500W

Embedded GPU Computer

Version: V1.10

GP-3000

User Manual

 
GP-3000  |  User  Manual    2 
Contents 
Preface .................................................................................................................................................. 6 
Revision........................................................................................................................................................6 
Copyright Notice ..........................................................................................................................................6 
Acknowledgement .......................................................................................................................................6 
Disclaimer ....................................................................................................................................................6 
Declaration of Conformity ...........................................................................................................................7 
Product Warranty Statement ......................................................................................................................7 
Technical Support and Assistance ...............................................................................................................9 
Conventions Used in this Manual ................................................................................................................9 
Safety Precautions .................................................................................................................................... 10 
Ordering information................................................................................................................................ 11 
Chapter 1 Product Introductions ........................................................................................................ 13 
1.1 Overview ........................................................................................................................................... 14 
1.2 Highlights........................................................................................................................................... 15 
1.3 Product Pictures ................................................................................................................................ 16 
1.4 Key Features ...................................................................................................................................... 19 
1.5 Hardware Specification ..................................................................................................................... 20 
1.6 System I/O ......................................................................................................................................... 23 
1.7 Mechanical Dimension ...................................................................................................................... 26 
Chapter 2 Switches & Connectors ...................................................................................................... 28 
2.1 Location of Switches and Connectors ............................................................................................... 29 
2.1.1 Top View .................................................................................................................................. 29 
2.1.2 Bottom View ............................................................................................................................ 29 
2.2 Switches and Connectors Definition ................................................................................................. 30 
2.3 Definition of Switches ....................................................................................................................... 31 
2.4 Definition of Connectors ................................................................................................................... 33 
Chapter 3 System Setup ...................................................................................................................... 40 
3.1 Removing Top Cover ......................................................................................................................... 41 
3.1 Installing CPU .................................................................................................................................... 44 
3.2 Installing SO-DIMM ........................................................................................................................... 46 
3.3 Installing Mini-PCIe Card ................................................................................................................... 47 
3.4 Installing M.2 E Key Card ................................................................................................................... 48 
3.5 Installing M.2 M Key Card ................................................................................................................. 49 
3.6 Installing Antenna ............................................................................................................................. 50 
3.6.1 Antenna #1 to #4 ..................................................................................................................... 50 
3.6.2 Antenna #5 to #7 ..................................................................................................................... 52 
3.7 Installing Thermal Pad on MOSFET Heatsink .................................................................................... 54 

 
GP-3000  |  User  Manual    3 
8 Installing Top Cover ........................................................................................................................... 55 
9 Installing SATA Hard Drives at Front Panel ....................................................................................... 57 
10 Installing SIM Card ............................................................................................................................ 60 
11 Installing Rubber Foot Pad ............................................................................................................... 61 
12 Installing Wall Mount ....................................................................................................................... 62 
13 Installing Desktop Mount Bracket .................................................................................................... 64 
14 Installing 19” Rack Mount ................................................................................................................ 66 
15 Connecting to Power Supply ............................................................................................................ 69 
Chapter 4 BIOS Setup .......................................................................................................................... 70 
1 BIOS Introduction .............................................................................................................................. 71 
2 Main Setup ........................................................................................................................................ 72 
3 Advanced Setup ................................................................................................................................ 73 
3.1 CPU Configuration ................................................................................................................... 73 
3.2 Power & Performance ............................................................................................................. 74 
3.3 SATA Configuration.................................................................................................................. 74 
3.4 PCH-FW Configuration ............................................................................................................. 75 
3.5 Trusted Computing .................................................................................................................. 76 
3.6 ACPI Settings ............................................................................................................................ 77 
3.7 F81866 Super IO Configuration ............................................................................................... 78 
3.8 Hardware Monitor ................................................................................................................... 79 
3.9 S5 RTC Wake Settings .............................................................................................................. 80 
3.10 Serial Port Console Redirection ............................................................................................. 80 
3.11 USB Configuration ................................................................................................................. 81 
3.12 Network Stack Configuration ................................................................................................ 82 
3.13 CSM Configuration ................................................................................................................. 82 
3.14 NVMe Configuration .............................................................................................................. 84 
4 Chipset Setup .................................................................................................................................... 85 
4.1 System Agent (SA) Configuration ............................................................................................ 85 
4.2 PCH-IO Configuration .............................................................................................................. 87 
5 Security Setup ................................................................................................................................... 90 
5.1 Administrator Password .......................................................................................................... 90 
5.2 User Password ......................................................................................................................... 90 
5.3 Security Boot ........................................................................................................................... 90 
6 Boot Setup ......................................................................................................................................... 91 
6.1 Setup Prompt Timeout [1] ....................................................................................................... 91 
6.2 Bootup NumLock State [Off] ................................................................................................... 91 
6.3 Quiet Boot [Disabled] .............................................................................................................. 91 
6.4 Fast Boot [Disabled] ................................................................................................................. 91 
7 Save & Exit ......................................................................................................................................... 92 

 
GP-3000  |  User  Manual    4 
7.1 Save Changes and Exit ............................................................................................................. 92 
7.2 Discard Changes and Exit ......................................................................................................... 92 
7.3 Save Changes and Reset .......................................................................................................... 92 
7.4 Discard Changes and Reset ...................................................................................................... 92 
7.5 Save Changes ........................................................................................................................... 92 
7.6 Discard Changes....................................................................................................................... 92 
7.7 Restore Defaults ...................................................................................................................... 92 
7.8 Save as User Defaults .............................................................................................................. 92 
7.9 Restore User Defaults .............................................................................................................. 92 
Chapter 5 Product Application ............................................................................................................ 93 
1 Digital I/O (DIO) application .............................................................................................................. 94 
1.1 Digital I/O Programming Guide ............................................................................................... 94 
2 DIO Hardware Specification ............................................................................................................ 100 
2.1 DIO Connector Definition ...................................................................................................... 101 
3 GPIO LED application ........................................................................................................................ 103 
3.1 GPIO LED Programming Guide .............................................................................................. 103 
4 GPIO LED Status Definition ............................................................................................................... 115 
Chapter 6 Optional Modules & Accessories ..................................................................................... 116 
1 Optional Module Pin Definition & Settings ..................................................................................... 117 
1.1 CMI-M12LAN01-R12/UB1410 Module .................................................................................. 117 
1.2 CMI-XM12LAN01-R10/UB1410 Module ................................................................................ 117 
1.3 CMI-COM04-R10/UB1403 Module ........................................................................................ 118 
1.4 CFM-IGN03-R11 Module ....................................................................................................... 119 
1.5 GEB-3301-R10 Module .......................................................................................................... 120 
1.6 GEB-3601-R10 Module .......................................................................................................... 123 
2 Installing High Speed CMI Module .................................................................................................. 127 
2.1 CMI-LAN01-R12/UB1412 Module ......................................................................................... 127 
2.2 CMI-M12LAN01-R12/UB1410 Module .................................................................................. 129 
2.3 CMI-XM12LAN01-R10/UB1410 Module ................................................................................ 132 
2.4 CMI-10GLAN02-R10/UB1428 Module ................................................................................... 135 
3 Installing Low Speed CMI Module ................................................................................................... 139 
3.1 CMI-DIO04-R11/UB1418 Module .......................................................................................... 139 
3.2 CMI-COM04-R10/UB1403 Module ........................................................................................ 142 
4 Installing CFM Module .................................................................................................................... 145 
4.1 CFM-PoE01 Module ............................................................................................................... 145 
4.2 CFM-PoE07-R10 Module ....................................................................................................... 148 
4.3 CFM-IGN03-R11 Module ....................................................................................................... 151 
5 Installing MEC Module .................................................................................................................... 152 
5.1 MEC-USB-M102-30/UB1414 Module .................................................................................... 152 

 
GP-3000  |  User  Manual    5 
6 Installing GEB-3301-R10 Module .................................................................................................... 155 
6.1 Installing GEB-3301-R10 Module onto GP-3000 ................................................................... 155 
6.2 Installing GPU Card ................................................................................................................ 158 
6.3 Installing Rubber Foot Pad .................................................................................................... 166 
6.4 Installing Wall Mount ............................................................................................................ 167 
6.5 Installing 19” Rack Mount ..................................................................................................... 169 
7 Installing GEB-3601-R10 Module .................................................................................................... 173 
7.1 Installing GEB-3601-R10 Module onto GP-3000 ................................................................... 173 
7.2 Installing GPU Card ................................................................................................................ 177 
7.3 Installing Rubber Foot Pad .................................................................................................... 186 
7.4 Installing Wall Mount ............................................................................................................ 188 
7.5 Installing 19” Rack Mount ..................................................................................................... 190 
 
 
   

GP-3000 | User Manual 6

Preface

Revision

Description

Date

1.00

First Release

2021/03/03

1.01

Add safety precaution and update product photos

2021/04/01

1.02

Add 19” Rack Mount installation

2021/05/26

1.03

Correction Made

2021/06/28

1.04

Add CMI-XM12LAN01-R10 installation steps

2021/07/26

1.05

Correction Made

2021/09/11

1.06

Correction Made

2022/02/25

1.07

Correction Made

2022/05/31

1.08

Add Fire Protection: EN45545-2

2022/07/29

1.09

Correction Made

2023/04/14

1.10

MEC-USB Updated

2023/07/31

Copyright Notice

reproduced in any form or by any means for commercial use without the prior written permission of

Cincoze Co., Ltd. All information and specification provided in this manual are for reference only and remain

subject to change without prior notice.

Acknowledgement

Cincoze is a registered trademark of Cincoze Co., Ltd. All registered trademarks and product names

mentioned herein are used for identification purposes only and may be trademarks and/or registered

trademarks of their respective owners.

Disclaimer

This manual is intended to be used as a practical and informative guide only and is subject to change

without notice. It does not represent a commitment on the part of Cincoze. This product might include

unintentional technical or typographical errors. Changes are periodically made to the information herein to

correct such errors, and these changes are incorporated into new editions of the publication.

GP-3000 | User Manual 7

Declaration of Conformity

FCC

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the user will be required to correct

the interference at his own expense.

CE

The product(s) described in this manual complies with all application European Union (CE)

directives if it has a CE marking. For computer systems to remain CE compliant, only

CE-compliant parts may be used. Maintaining CE compliance also requires proper cable and

cabling techniques.

E-Mark

The "E" mark is based on ECE regulations issued by the Economic Commission for Europe. It

is an organizational part of the UN and the members are EU countries and many others.

Therefore, the acceptance of approved components is much broader, especially in the

eastern part of Europe. It is necessary to confirm whether a particular country has accepted

(signed) the application of an ECE-regulation; as the application it is not mandatory for the

countries.

Product Warranty Statement

Warranty

Cincoze products are warranted by Cincoze Co., Ltd. to be free from defect in materials and workmanship

for 2 years from the date of purchase by the original purchaser. During the warranty period, we shall, at our

option, either repair or replace any product that proves to be defective under normal operation. Defects,

malfunctions, or failures of the warranted product caused by damage resulting from natural disasters (such

as by lightening, flood, earthquake, etc.), environmental and atmospheric disturbances, other external

forces such as power line disturbances, plugging the board in under power, or incorrect cabling, and

damage caused by misuse, abuse, and unauthorized alteration or repair, and the product in question is

either software, or an expendable item (such as a fuse, battery, etc.), are not warranted.

GP-3000 | User Manual 8

RMA

Before sending your product in, you will need to fill in Cincoze RMA Request Form and obtain an RMA

number from us. Our staff is available at any time to provide you with the most friendly and immediate

service.

◼ RMA Instruction

⚫ Customers must fill in Cincoze Return Merchandise Authorization (RMA) Request Form and

obtain an RMA number prior to returning a defective product to Cincoze for service.

⚫ Customers must collect all the information about the problems encountered and note

anything abnormal and describe the problems on the “Cincoze Service Form” for the RMA

number apply process.

⚫ Charges may be incurred for certain repairs. Cincoze will charge for repairs to products

whose warranty period has expired. Cincoze will also charge for repairs to products if the

damage resulted from acts of God, environmental or atmospheric disturbances, or other

external forces through misuse, abuse, or unauthorized alteration or repair. If charges will

be incurred for a repair, Cincoze lists all charges, and will wait for customer’s approval

before performing the repair.

⚫ Customers agree to ensure the product or assume the risk of loss or damage during transit,

to prepay shipping charges, and to use the original shipping container or equivalent.

⚫ Customers can be sent back the faulty products with or without accessories (manuals, cable,

etc.) and any components from the system. If the components were suspected as part of

the problems, please note clearly which components are included. Otherwise, Cincoze is not

responsible for the devices/parts.

⚫ Repaired items will be shipped along with a "Repair Report" detailing the findings and

actions taken.

Limitation of Liability

Cincoze’ liability arising out of the manufacture, sale, or supplying of the product and its use, whether based

on warranty, contract, negligence, product liability, or otherwise, shall not exceed the original selling price

of the product. The remedies provided herein are the customer’s sole and exclusive remedies. In no event

shall Cincoze be liable for direct, indirect, special or consequential damages whether based on contract of

any other legal theory.

GP-3000 | User Manual 9

Technical Support and Assistance

1. Visit the Cincoze website at www.cincoze.com where you can find the latest information about the

product.

2. Contact your distributor or our technical support team or sales representative for technical support if

you need additional assistance. Please have following information ready before you call:

⚫ Product name and serial number

⚫ Description of your peripheral attachments

⚫ Description of your software (operating system, version, application software, etc.)

⚫ A complete description of the problem

⚫ The exact wording of any error messages

Conventions Used in this Manual

GP-3000 | User Manual 10

Safety Precautions

Before installing and using this device, please note the following precautions.

1. Read these safety instructions carefully.

2. Keep this User’s Manual for future reference.

3. Disconnected this equipment from any AC outlet before cleaning.

4. For plug-in equipment, the power outlet socket must be located near the equipment and must be

easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or letting it fall may cause

damage.

7. Make sure the voltage of the power source is correct before connecting the equipment to the power

outlet.

8. Use a power cord that has been approved for using with the product and that it matches the voltage

and current marked on the product’s electrical range label. The voltage and current rating of the cord

must be greater than the voltage and current rating marked on the product.

9. Position the power cord so that people cannot step on it. Do not place anything over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power source to avoid damage by

transient overvoltage.

12. Never pour any liquid into an opening. This may cause fire or electrical shock.

13. Never open the equipment. For safety reasons, the equipment should be opened only by qualified

service personnel.

If one of the following situations arises, get the equipment checked by service personnel:

⚫ The power cord or plug is damaged.

⚫ Liquid has penetrated into the equipment.

⚫ The equipment has been exposed to moisture.

⚫ The equipment does not work well, or you cannot get it work according to the user's manual.

⚫ The equipment has been dropped and damaged.

⚫ The equipment has obvious signs of breakage.

14. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or

equivalent type recommended by the manufacturer.

15. Equipment intended only for use in a RESTRICTED ACCESS AREA.

16. The product cannot be used vertically standing on a desktop or any flat surface without wall mount

bracket.

GP-3000 | User Manual 11

Ordering information

Before installation, please ensure all the items listed in the following table are included in the package.

Notify your sales representative if any of the above items are missing or damaged.

GP-3000

Available Models

Model No.

Product Description

GP-3000-R10

9th/8th Gen Intel® Xeon®/Core™ GPU Computer, Supports Dual Full-length GPU

Expansion Up to 500W

Package Checklist

Item

Description

Q’ty

1

Wall Mount Bracket

1

2

Desktop Mount Kit

1

3

CPU Heat Sink and Thermal Pad

1

4

Screws Pack

4

5

Rubber Foot Kit

1

6

Power Terminal Block Connector

2

7

Remote Function Terminal Block Connector

2

GP-3000 | User Manual 12

GEB-3301-R10

Available Models

Model No.

Product Description

GEB-3301-R10

GPU Expansion Box with 1 x PCIe x 16 and 1 x PCIe x 4 Slots for GP-3000 Series

Package Checklist

Item

Description

Q’ty

1

Wall Mount Bracket

1

2

8 Pin to 6+2 Pin GPU Power Cable

2

3

Screws Pack

2

4

GPU Card Retainer Screw Pack

1

5

Rubber Foot Kit

1

6

Sponge

2

GEB-3601-R10

Available Models

Model No.

Product Description

GEB-3601-R10

GPU Expansion Box with 2 x PCIe x 16 (Signal PCIe x 8), 1 x PCIe x 4 and 1 x PCIe

x 1 Slots for GP-3000 Series

Package Checklist

Item

Description

Q’ty

1

Wall Mount Bracket

1

2

8 Pin to 6+2 Pin GPU Power Cable

4

3

Screws Pack

2

4

GPU Card Retainer Screw Pack

1

5

Rubber Foot Kit

1

6

Sponge

4

GP-3000 | User Manual 13

Chapter 1

Product Introductions

GP-3000 | User Manual 14

1.1 Overview

GP-3000. A flagship GPU edge computing computer of Cincoze. Its crowning feature is an exclusive GPU

Expansion Box that provides expansion for up to two high-end GPU cards and creating a high-performance

industrial-grade GPU computing computer.

Extreme Computing Performance

The GP-3000’s extreme computing power starts with an 8th or 9th generation Intel® Xeon® or Core™

i3/i5/i7 (Coffee Lake and Coffee Lake-R) CPU, Intel® C246 chipset, and supports two sets of DDR4-2666

ECC/non-ECC SO-DIMM up to 64 GB and can support up to two 250 W high-end GPU cards. With a total

power consumption of 720W, it’s easy to meet and exceed high-efficiency application requirements. A

precision heat dissipation and cooling design quickly wick away heat, keeping the focus squarely on the

breathtaking performance of the GP-3000.

Rich Application Functions

The GP-3000 redefines the standard for high-end GPU computers, with high-speed I/O and multiple

functions. In addition to the standard five LAN ports and six USB 3.2 ports, the GP-3000 uses Cincoze’s

exclusive CMI and CFM modular design, which offers expansion modules with eight Gigabit PoE, two USB

3.2, or dual 10 Gb/s LAN ports. Storage options include high-speed M.2 NVMe storage slots and four

hot-swappable 2.5” HDD/SSD trays accessible through the front maintenance panel. Together, they meet

large-capacity machine vision storage requirements and improve hard disk accessibility for convenient

removal and replacement. The IGN module (power ignition sensing) can monitor the on-board battery

voltage and set a delayed shutdown time to avoid damage to the system due to unstable current when

starting or turning off the engine. This combination of diverse functions provides the flexibility to meet the

requirements of different market applications.

Strong and Durable

In the pursuit of ever-higher standards, the GP-3000 has passed the MIL-STD-810G certification (pending)

designed and promulgated by the US Department of Defense to qualify military equipment. The GP-3000

features 9-48 VDC power input, is built for -40 to 70°C temperature operation. The GP-3000 has E-mark and

EN50155 (EN50121-3-2 only) certifications, so it is capable of withstanding the rigors of rail and vehicle

applications as well as other harsh environments.

GP-3000 | User Manual 15

1.2 Highlights

Cutting-Edge Performance

Futureproof Scalability

Mount Anywhere

The GP-3000 is powered by the excellent

performance of 8th / 9th generation Intel®

Xeon® / Core™ processors. Supports two DDR4

SO-DIMM ECC/Non-ECC memory, up to 64GB.

Through the exclusive GPU Expansion Box

(GEB) design can flexibly expand up to dual

high-end GPU cards. And GP-3000 offers 720W

system power budget for high-end GPU

Computing applications.

Upgrades are now easy. In addition to GPU

expansion through the GEBs, the GP-3000 also

retains flexibility for future upgrades. Whether

adding or upgrading GPU cards, the core

system remains, and only the GBE is changed.

Upgrades become easier, and the expansion

possibilities become almost endless.

The GP-3000 supports multiple mounting

options for various environment. Mounting

options include a wall mount, desktop mount,

Face-up mount, and 19” rack mount. Simple.

GP-3000 | User Manual 16

1.3 Product Pictures

GP-3000

GP-3000 | User Manual 17

GP-3000/GEB-3301

GP-3000 | User Manual 18

GP-3000/GEB-3601

GP-3000 | User Manual 19

1.4 Key Features

GP-3000

⚫ Supports 9th/8th Gen Intel® Xeon®/Core™ Processor (35W / 65W / 80W)

⚫ 2 x DDR4 SO-DIMM Sockets, Supports ECC/non ECC type up to 2666 MHz, 64GB

⚫ 4 x 2.5" Hot Swappable SATA III HDD/SSD Bays (Max Height 15 mm)

⚫ 1 x M.2 M Key Socket (NVMe), 1 x M.2 E Key Socket (CNVi)

⚫ 2 x Front Accessible SIM Card Slots for Signal Redundancy

⚫ CMI Technology for Various I/O Module Expansions

⚫ CFM Technology for Power Ignition Sensing & PoE Function

⚫ Versatile Mounting Methods (Wall / Stand / Face-up / 19” Rack Mount)

⚫ Military Standard Shock & Vibration Proof (pending)

GEB-3301

⚫ Supports NVIDIA RTX 30 Series GPU Card

⚫ Support 1 x PCIe x16 Slot for full-length GPU card Expansion

⚫ Support 1 x PCIe x4 Slot for Add-on card Expansion

⚫ Intelligent Cooling Design for High Performance GPU Card

⚫ Military Standard Shock & Vibration Proof (pending)

GEB-3601

⚫ Supports NVIDIA RTX 30 Series GPU Card

⚫ Supports 2 x PCIe x16 Slots for full-length GPU cards Expansion

⚫ Supports 1 x PCIe x4 Slot and 1 x PCIe x1 slot for Add-on cards

⚫ Intelligent Cooling Design for High Performance GPU Card

⚫ Military Standard Shock & Vibration Proof (pending)

GP-3000 | User Manual 20

1.5 Hardware Specification

GP-3000

Processor

• 9th Generation Intel® Coffee Lake-R S Series CPU:

- Intel® Xeon® E-2278GE 8 Cores Up to 4.7 GHz, TDP 80W

- Intel® Xeon® E-2278GEL 8 Cores Up to 3.9 GHz, TDP 35W

- Intel® Core™ i7-9700E 8 Cores Up to 4.4 GHz, TDP 65W

- Intel® Core™ i5-9500E 6 Cores Up to 4.2 GHz, TDP 65W

- Intel® Core™ i3-9100E 4 Cores Up to 3.7 GHz, TDP 65W

- Intel® Core™ i7-9700TE 8 Cores Up to 3.8 GHz, TDP 35W

- Intel® Core™ i5-9500TE 6 Cores Up to 3.6 GHz, TDP 35W

- Intel® Core™ i3-9100TE 4 Cores Up to 3.2 GHz, TDP 35W

• 8th Generation Intel® Coffee Lake CPU:

- Intel® Xeon® E-2176G 6 Cores up to 4.7 GHz, TDP 80W

- Intel® Xeon® E-2124G 4 Cores up to 4.5 GHz, TDP 71W

- Intel® Core™ i7-8700 6 Cores up to 4.6 GHz, TDP 65W

- Intel® Core™ i5-8500 6 Cores, up to 4.1 GHz, TDP 65W

- Intel® Core™ i3-8100 4 Cores 3.6 GHz, TDP 65W

- Intel® Core™ i7-8700T 6 Cores up to 4.0 GHz, TDP 35W

- Intel® Core™ i5-8500T 6 Cores up to 3.5 GHz, TDP 35W

- Intel® Core™ i3-8100T 4 Cores 3.1 GHz, TDP 35W

- Intel® Pentium® G5400 2 Cores 3.7 GHz, TDP 58W

- Intel® Pentium® G5400T 2 Cores 3.1 GHz, TDP 35W

- Intel® Celeron® G4900 2 Cores 3.1 GHz, TDP 54W

- Intel® Celeron® G4900T 2 Cores 2.9 GHz, TDP 35W

Chipset

• Intel® C246

BIOS

• AMI BIOS

Memory

• 2x DDR4-2666/2400 MHz SO-DIMM Socket

• Support ECC / non-ECC Type Up to 64 GB

* Xeon/i7/i5: Up to DDR4 2666MHz

* i3/Pentium/Celeron: Up to DDR4 2400 MHz

Graphics

• Integrated Intel® UHD Graphics

(Xeon/i7/i5/i3: UHD 630; Pentium/Celeron: UHD 610)

• Supports Triple Independent Display (VGA/DisplayPort/HDMI)

Audio

• Realtek® ALC888, High Definition Audio

I/O Interface

• 1x HDMI Connector (4096 x 2160 @ 30Hz)

• 1x DisplayPort Connector (4096 x 2340 @ 60Hz)

• 1x VGA Connector (1920 x 1200 @30Hz)

• 5x GbE LAN, RJ45

- GbE1: Intel® I219-LM

- GbE2: Intel® I210

- GbE3: Intel® I210

- GbE4: Intel® I210

- GbE5: Intel® I210

• 2x RS-232/422/485 with Auto Flow Control (Support 5V/12V),

DB9

• 2x 10Gbps USB3.2 Gen2 Ports, Type-A

• 4x 5Gbps USB3.2 Gen1 Ports, Type-A

• 1x Line-out & 1x Mic-in, Phone Jack 3.5mm

• 1x ATX Power On/Off Button

• 1x Remote Power On/Off, 2-pin Terminal Block

• 1x Remote Reset, 2-pin Terminal Block

• 1x AT/ATX Mode Switch

• 1x Reset Button

• 1x Clear CMOS Switch

Storage

• 4x 2.5” Front Accessible SATA HDD/SSD Bay (SATA 3.0),

Supports up to 15mm in Height

• 1x M.2 Key M 2280 Socket, Supports PCIe x4 NVMe SSD or

SATA SSD (GEN3)

• Supports RAID 0/ 1/ 5/ 10

Expansion

• PCIe

Optional GPU Expansion Box

- 1 x PCIe x 4 + 1 x PCIe x 16

- 2 x PCIe x 16 (8 Lanes) + 1 x PCIe x 1 + 1 x PCIe x 4

• 2x Full-size Mini-PCIe Socket

• 1x M.2 Key E 2230 Socket, Supports Intel CNVi Module

• 1x M.2 Key M 2280 Socket, Support NVMe/SATA SSD

• 1x Universal Bracket

• 2x SIM Sockets

• 7x Antenna Holes

Cincoze Modular Technology

• CMI Interface

1 x High Speed CMI (Combined Multiple I/O) Interface

1 x Low Speed CMI (Combined Multiple I/O) Interface

• CMI Module

Optional Modules:

- 4x GbE LAN, RJ45

- 4x GbE LAN, M12 A-Coded

- 4x GbE LAN, M12 X-Coded

- 2x 10GbE LAN, RJ45

- 2x RS-232/422/485 with Auto Flow Control (Supports

5V/12V), DB9

- 16x Optical Isolated DIO (8DI, 8DO), 2x 10 Pin Terminal Block

• CFM Interface

1x CFM (Control Function Module) IGN Interface

1x CFM (Control Function Module) PoE Interface

• CFM Module

Optional Module

- 1x Power Ignition Sensing Module with Delay Time

Management and Selectable 12V/24V

- 1x PoE Function Module Supports Up to 4x PoE+ with

Individual port 25.5W

• MEC Module

Optional Modules:

- 2x 5Gbps USB 3.2 Gen1, Type A

- 2x GbE LAN, RJ45

Page is loading ...

Cincoze GP-3000 User manual

Cincoze GP-3000 User manual

Related papers

Other documents