Ergotron 97-935-062 User guide
- Category
- Flat panel accessories
- Type
- User guide
888-97-373-G-00 rev.B • 12/14
1 of 8
WorkFit Single HD Monitor Kit
for WorkFit-T and WorkFit-PD
AB C D E
1
2
3
4
1x M5 x 8mm
4x M6 x 7mm
1x
14mm
1x 2x
1x
M3 x 6mm
2x
M6 x 30mm
2x
M4 x 10mm
4x
M4 x 7mm
4x
1x
1x
6x
1x 4mm
M6 x 35mm
4x
M6 x 25mm
User's Guide - English
Guía del usuario - Español
Manuel de l’utilisateur - Français
Gebruikersgids - Deutsch
Benutzerhandbuch - Nederlands
Guida per l’utente - Italiano
Användarhandbok - svenska
Includes
Constant Force™
Technology
4x
ENGLISH
For the latest User Installation Guide please visit: www.ergotron.com
User's Guide
888-97-373-G-00 rev.B • 12/14
2 of 8
WARNING
Impact Hazard!
Moving Parts can Crush and Cut.
Raise monitor to top of vertical adjustment
BEFORE removing.
Failure to heed this warning may result in serious
personal injury or property damage!
822-635
ENGLISH
These symbols alert users of a safety condi-
tion that demands attention. All users should
be able to recognize and understand the
signifi cance of the following Safety Hazards
if encountered on the product or within the
documentation. Children who are not able
to recognize and respond appropriately to
Safety Alerts should not use this product with-
out adult supervision!
Hazard Symbols
Review Symbol Signal Word Level of Hazard
NOTE A NOTE indicates important information that helps you
make better use of this product.
CAUTION
A CAUTION indicates either potential damage to
hardware or loss of data and tells you how to avoid the
problem.
WARNING A WARNING indicates either potential for property dam-
age, personal injury, or death.
ELECTRICAL
An Electrical indicates an impending electrical hazard
which, if not avoided, may result in personal injury, re
and/or death.
Safety
Important! You will need to adjust this product after installation is complete. Make sure all your
equipment is properly installed on the product before attempting adjustments. This product should move
smoothly and easily through the full range of motion and stay where you set it. If movements are too
easy or diffi cult or if product does not stay in desired positions, follow the adjustment instructions to
create smooth and easy movements. Depending on your product and the adjustment, it may take many
turns to notice a difference. Any time equipment is added or removed from this product, resulting in a
change in the weight of the mounted load, you should repeat these adjustment steps to ensure safe and
optimum operation.
Warning: Impact Hazard! Moving Parts can Crush and Cut.
Raise worksurface to top of vertical adjustment BEFORE removing equipment.
Failure to heed this warning may result in serious personal injury and or property damage!
Warning: Impact Hazard! Moving Parts can Crush and Cut.
Raise monitor to top of vertical adjustment before removing.
888-97-373-G-00 rev.B • 12/14
3 of 8
16 - 28 lbs
(7.3-12.7 kg)
16 - 28 lbs
(7.3-12.7 kg)
< 5 lbs
(2.25 kg)
< 2 lbs
(0.9 kg)
< 5 lbs
(2.25 kg)
AA
BB
CC
A+B+C < 31 lbs (14 kg)
A+B+C < 28.4 lbs (12.88 kg)
5"
(127 mm)
20˚
10˚
WorkFit-PDWorkFit-T
ENGLISH
888-97-373-G-00 rev.B • 12/14
4 of 8
1
2x
M6 x 30mm
4mm
a
b
2x M6 x 35mm
WorkFit-PD
1
a
c
WorkFit-T
4x
4x
M6 x 25mm
4mm
b
ENGLISH
888-97-373-G-00 rev.B • 12/14
5 of 8
2
0°
M3 x 6mm
1x
M4 x 10mm
M4 x 7mm
4x
4x
3
4mm
4x
1x
M5 x 8mm
M6 x 7mm
42x
1x
2x
ENGLISH
888-97-373-G-00 rev.B • 12/14
6 of 8
5
4mm
a
4mm
b
ENGLISH
Adjustment Step
Important! You will need to adjust this product after installation is complete. Make sure all your equipment is
properly installed on the product before attempting adjustments. This product should move smoothly and easily
through the full range of motion and stay where you set it. If movements are too easy or diffi cult or if product
does not stay in desired positions, follow the adjustment instructions to create smooth and easy movements.
Depending on your product and the adjustment, it may take many turns to notice a difference. Any time
equipment is added or removed from this product, resulting in a change in the weight of the mounted load, you
should repeat these adjustment steps to ensure safe and optimum operation.
Increase Lift Strength
If the mounted weight is too heavy or
this product does not stay up when
raised, then you'll need to increase
Lift Strength:
Decrease Lift Strength
If the mounted weight is too light or
this product does not stay down when
lowered, then you'll need to decrease
Lift Strength:
Increase Friction
If this product moves too easily, then
you'll need to increase friction:
Decrease Friction
If this product is too diffi cult to move,
then you'll need to decrease friction:
888-97-373-G-00 rev.B • 12/14
7 of 8
c1
2
14mm
1
2
ENGLISH
Increase Lift Strength
If the mounted weight is too heavy or
this product does not stay up when
raised, then you'll need to increase
Lift Strength:
Decrease Lift Strength
If the mounted weight is too light or
this product does not stay down when
lowered, then you'll need to decrease
Lift Strength:
WorkFit-PD only
888-97-373-G-00 rev.B • 12/14
8 of 8
ENGLISH
For local customer care phone numbers visit: http://contact.ergotron.com
Learn more about ergonomic computer use at:
www.computingcomfort.org
Set Your Workstation to Work For YOU!
Height Position top of screen slightly below eye level.
Position keyboard at about elbow height with wrists fl at.
Distance Position screen an arm's length from face—at least 20” (508mm).
Position keyboard close enough to create a 90˚ angle in elbow.
Angle Tilt screen to eliminate glare.
Tilt the keyboard back 10° so that your wrists remain fl at.
To Reduce Fatigue
Breathe - Breathe deeply through your nose.
Blink - Blink often to avoid dry eyes.
Break • 2 to 3 minutes every 20 minutes
• 15 to 20 minutes every 2 hours.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Ergotron 97-935-062 User guide
- Category
- Flat panel accessories
- Type
- User guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Ergotron 45-491-216 Assembly Instructions
-
Ergotron 45-527-216 User manual
-
Ergotron 97-940-026 Installation guide
-
-
-
-
-
-
-