Noble House 211698 Operating instructions

Type
Operating instructions

This manual is also suitable for

Caution : You must read this before you proceed
Chair
Page 1 OF 5
Label Picture Description QTY
A Chair Seat 1
B Pressure Cylinder 1
C Chromed Base 1
Before
Beginning
Assembly:
Page 2 OF 5
Step 1
Step 2
Overview
This Chair has multiple parts and may require up to 30 minutes to
assemble. To give you an overview of the Chair parts, the above picture
is to help you put the various parts into perspective. Please read
through the instructions below to familiarise yourself with the parts and
steps before assembly.
Unpack and place all parts on a clean, non-marring surface.
Insert the Pressure Cylinder(B) into the Mounting Position of Chromed
Base(C) .
Chair Seat(A)
Pressure Cylinder(B)
Chromed Base(C)
FRONT FACING
Page 3 OF 5
Step 3
Step 4
Hit the Pressure Cylinder(B) into the Mounting Position of Chromed
Base(C) with hammer.
Put the Pressure Cylinder(B) with the Chromed Base(C) into the
Mounting Position under the Chair Seat(A).
Make sure all parts are connected and securely locked into
position.
Your chair is ready for use.
Caution: This Chair can only be used on a flat, level surface.
Page 4 OF 5
Page 5 OF 5
1 / 1

Noble House 211698 Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Ask the document