All-Pro APLEL Dimensions Guide

Type
Dimensions Guide

All-Pro APLEL is an emergency light suitable for general-purpose applications. It features dual voltage input, line-latching, brownout circuit, low voltage disconnect, and overload/short circuit protection. The light has a designer white textured finish and is made of high-impact thermoplastic material. It is easy to install, with snap-fit construction and a universal J-box mounting pattern. The LED heads are long-lasting and fully adjustable. The APLEL is UL 924 Listed, suitable for damp locations, and meets Life Safety NFPA 101, NEC/OSHA, and most state and local codes.

All-Pro APLEL is an emergency light suitable for general-purpose applications. It features dual voltage input, line-latching, brownout circuit, low voltage disconnect, and overload/short circuit protection. The light has a designer white textured finish and is made of high-impact thermoplastic material. It is easy to install, with snap-fit construction and a universal J-box mounting pattern. The LED heads are long-lasting and fully adjustable. The APLEL is UL 924 Listed, suitable for damp locations, and meets Life Safety NFPA 101, NEC/OSHA, and most state and local codes.

APLEL
POLYCARBONATE
HOUSING
LED SOURCE
LOW PROFILE
SEALED NICKEL
CADMIUM BATTERY
EMERGENCY LIGHTING
DESCRIPTION
The ALL PRO Series emergency light (APLEL) is the ideal choice
when an affordable unit is required for general purpose emergency
applications. Its styling and designer finish enables it to blend with
any decor. The housing and mounting plate employ snap- fit
construction to reduce the installation time. Both emergency
lighting heads have long life LED’s and are fully adjustable,
insuring maximum flexibility.
Electrical
• Dual Voltage Input 120/277
VAC, 60Hz
• Line-latching
• Brownout circuit
• Low Voltage Disconnect
• Overload/Short Circuit
Protection
• Test Switch / Power connector
facilitates installation
• 3.6V, .78W DC long Lasting
LED Heads
Housing Construction
• All components are injection
molded, color stable, high
impact thermoplastic material
• Designer white textured finish
standard
• Components are of snap-fit
construction to facilitate
under 5-minute installation
Reinforcing ribs throughout to
provide maximum strength
• Suitable for wall or ceiling
mount applications
• Universal J-box mounting
pattern
• Keyhole mounting slots
• Aesthetically designed with a
thin profile
Battery
• Sealed Nickel Cadmium
• Maintenance Free, Long
Life
• Full Recharge Time: 24 hrs
(max.)
Code Compliance
• UL 924 Listed
• Damp Location
• Life Safety NFPA 101
• NEC/OSHA
• Most State and Local
Codes
• Operating temperature
range 10C to 40C
Lamp Data
Long Life LED Emergency
Heads
• Fully adjustable
Warranty
• Five-year warranty
SPECIFICATION FEATURES
DIMENSION
4 1/2”
[ 114.3mm]
9”
[ 229mm]
2-5/16”
[ 58.74mm]
PS502004EN
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770.486.4801 2/15
Visit our web site at www.eaton.com/lighting
For complete product data, reference the Fluorescent Specification binder. Specifications & dimensions subject to change without notice. Consult your Eaton’s Cooper Lighting Representative for availability and ordering information.
EATON’S COOPER LIGHTING - ALL-PRO
  • Page 1 1

All-Pro APLEL Dimensions Guide

Type
Dimensions Guide

All-Pro APLEL is an emergency light suitable for general-purpose applications. It features dual voltage input, line-latching, brownout circuit, low voltage disconnect, and overload/short circuit protection. The light has a designer white textured finish and is made of high-impact thermoplastic material. It is easy to install, with snap-fit construction and a universal J-box mounting pattern. The LED heads are long-lasting and fully adjustable. The APLEL is UL 924 Listed, suitable for damp locations, and meets Life Safety NFPA 101, NEC/OSHA, and most state and local codes.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI