2. TOGGLED
  3. A314-35210

TOGGLED A314-35210, A314-40210 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the TOGGLED A314-35210 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
MK2 INSTALLATION
INSTRUCTIONS
(U120110KR / U1212121K / U130925K / U121212OK)
Conversion from ballast to direct AC power
2014-01-03 (11-01308-AP)
An Company
164 Indusco Court Troy, Michigan 48083-4641 USA
(248) 614-2400 [email protected] toggled.com
• WARNING–Riskofreorelectricshock.LEDRetrotKitinstallaonrequiresknowledgeofluminaires
electricalsystems.Ifnotqualied,donotaemptinstallaon.Contactaqualiedelectrician.
• WARNING–Riskofreorelectricshock.Installthiskitonlyintheluminairesthathavetheconstrucon
featuresanddimensionsshowninthephotographsand/ordrawings.
• Donotmakeoralteranyopenholesinanenclosureofwiringorelectricalcomponentsduringkitinstallaon.
• WARNING–Topreventwireabrasion,donotexposewiringtoedgesofsheetmetalorothersharpobjects.
• WARNING–Toavoidpotenalreorshockhazard,donotusethisretrotkitinluminairesemploying
shuntedbi-pinlampholders.
• WARNING–Thisxturemustbegroundedandinstalledinaccordancewithlocalandnaonalelectrical
codes,byapersonfamiliarwiththeconstruconandoperaonoftheproductandthehazardsinvolved.
• Note:ShuntedlampholdersarefoundonlyinuorescentluminaireswithInstant-Startballasts.Instant-Start
ballastscanbeidenedbythewords“InstantStart”or“I.S.”markedontheballast.Thisdesignaonmaybe
intheformofastatementpertainingtotheballastitselformaybecombinedwiththemarkingforthelamps
withwhichtheballastisintendedtobeused,forexampleF40T12/IS.Formoreinformaon,contactTOGGLED.
• Installersshouldnotdisconnectexisngwiresfromlampholderterminalstomakenewconneconsat
lampholderterminals.Insteadinstallersshouldcutexisnglampholderleadsawayfromthelampholder
andmakenewelectricalconneconstolampholderleadwiresbyemployingapplicableconnectors.
• Thisdeviceisnotintendedforusewithemergencyexits.
• Thisdeviceisnotintendedforusewithdimmers.
Congratulaons!Youareabouttoinstallenergy
ecient,mercury-free,andenvironmentally
sustainablelighngfromTOGGLED.Wesincerely
appreciateyourseleconofTOGGLEDsolid-state
lighngproducts,andwanttomakesurethat
yourinstallaonissafe,easy,andfast.
THIS KIT INCLUDES:
(1)InstallaonInstruconBooklet
(1)MK2mlamp(U120110TR,U1212121T,U130925T,orU1212120T)
(2)ULlistedwirenuts
(1)ULlistedG13lampholder
(1)Fixturemodicaonlabel
An Company
Thisdevicecomplieswithpart15oftheFCCrules.
Operaonissubjecttothefollowingtwocondions:
(1)Thisdevicemaynotcauseharmfulinterference,
and(2)thisdevicemustacceptanyinterference
received,includinginterferencethatmaycause
undesiredoperaon.Unauthorizedchangesor
modicaonstothisdevicemayresultinavoidin
complianceofpart15oftheFCCrules.
























































FIxTURE RETROFIT INSTRUCTIONS
STEP 1: VerifythevoltagerangoftheMK2mproduct(120-277Vac)matches
thevoltageofthexturecircuit.
WARNING-Toavoidshockorrehazard,turnopowertothexture
attheappropriatebreakerorfusepanel.
STEP 2: Removeolduorescentlampsandremovetheballastcover.
STEP 3: Cutallwiresaachedtotheballast(s)asclosetotheballast(s)as
possible.Leavetheballast(s)inplace.
Note:TOGGLEDMK2mlampsarepoweredfromasingle-end(des-
ignatedwiththeproductlabelormarkings)andrequiretheuseof
non-shuntedlampholders.
Ifthelampholdersareshunted,replacethemwiththe
non-shuntedlampholderssuppliedwiththelamp(s).
See"ShuntedLampholderReplacement"below.
STEP 4: Connectonewirefromeachlampholderatoneendofthextureto
line(black)andseparatelyconnecttheotherwiretoneutral(white).
Attheoppositeendofthexture,cutallwiresfromthelampholders.
Note:Ensurethextureis/remainsgroundedaertheretrotprocess.
STEP 5: Reinstallanyremovedwiringcoversandballastcovers.
STEP 6: Axtheincludedxture-modicaonlabeltothenewlyretroed
xture.Toindicatewhichendispowered,placethelabelonthebal-
lastcovernearestthepoweredend.
STEP 7: InstallthenewTOGGLEDMK2mlamp(s).Besuretoinstallthelampin
theproperorientaon(theendwiththeproductlabels/markingsshould
beconnectedtotheACwiredlampholders).
SHUNTED LaMpHOLDER REpLaCEMENT
STEP 1: Removeanybracketsorcoversholdingtheshuntedlampholdersinplace.
STEP 2: Cutanywiresaachedtotheshuntedlampholders.Becarefultocut
thewiresasclosetotheshuntedlampholdersaspossible.Youwill
needtoreusethiswire.
STEP 3: Stripwiresaccordingtothestripgaugeonthenewlampholders.
Ifagaugeisnotavailable,stripwires3/8"[9.5mm].
STEP 4: Insert1wireoneachsideofeachlampholderasindicatedbelow.
STEP 5: Reinstallthelampholdersandanyremovedcoversorbrackets.
4XB9
Catalog
Number
Lamp
Length
Lamp
Power
Fixture Type Min. Fixture
Dimensions
Max. Qty.
Lamps
U120110TR 48" 18.8W Recessed (IC)*
Surface*
Surface (Sealed Lens)
24" x 48"
24" x 48"
14" x 51"
4
4
6
U1212121T
48" 23.5W Recessed (IC)*
Surface*
Surface (No Lens)
24" x 48"
24" x 48"
16" x 48"
4
4
8
U130925T
48" 15.0W Recessed (IC)*
Surface*
24" x 48"
24" x 48"
4
4
U1212120T
24" 11.0W Recessed (IC)*
Surface*
24" x 48"
24" x 48"
4
4
*Lampsareratedforbothopenandclosedxtures
LEDRETROFITCONVERSION:FORUSEONLY
WITHTHEPRODUCTSDESCRIBEDANDINSTALLED
INACCORDANCEWITHTHESEINSTALLATION
INSTRUCTIONSPROVIDEDWITHTHISRETROFITKIT.
/