Contec CPS-SD-HUL-01 Owner's manual

Brand: Contec

Model: CPS-SD-HUL-01

Type: Owner's manual

Setup Guide

Optional SD Card

For HULFT IoT

CPS-SD-HUL-01

This guide describes how to set the CONPROSYS series optional SD card “CPS-SD-HUL-

01(this card)” in order to communicate with the HULFT IoT of the Saison Information Sys-

tems Co., Ltd.

The SD card is designed to operate along with the CONPROSYS M2M controller series or

M2M gateway series so that the firmware in the controller needs to be compatible.

If the firmware is not compatible, visit the Contec website and download the latest version

and update the controller before using the card.

 Compatible firmware list

Series name

Compatible firmware

M2M controller integrate type

Ver3.0.0 or later

M2M controller configurable type

Ver3.0.0 or later

M2M gateway

Ver3.0.0 or later

 HULFT IoT compatible specification

Item

Specification

Compatible HULFT server

HULFT8

Communication protocol

HTTP/HTTPS

Security

HULFT unique method

Communication method

A send file is created from the specified file when executing the

process task "Send HULFT IoT".

Transfer data format

CSV file

 About Manual

The manuals of CONPROSYS M2M controller series or M2M gateway series come with the

product. They can be downloaded from the Contec website. Read them before using the

product.

Download

https://www.contec.com/download/search/

1. Items to Set Up

How to connect the M2M controller and peripheral devices, refer to the M2M controller

manual.

This guide can be referred to when the M2M controller and the host computer are already

connected via a LAN cable, as well as the HULFT IoT Manager and the HULFT are installed

on the host computer beforehand.

How to install them, see the HULFT IoT first step guide.

Controller

CPS-SD-HUL-01

Power Supply

Power cable

A host computer

LAN cable

AC power cable

HULFT IoT software and

License

2. Setting procedure

(1) Check the HULFT IoT Manager setting

This document provides safety information using the following symbols to prevent acci-

dents resulting in injury or death and the destruction of equipment and resources. Under-

stand the meanings of these labels to operate the equipment safely.

(2) Set the CONPROSYS

Log into the CONPROSYS via web browser, and go to the [HULFT IoT] in the Setting menu.

(*1)

Set the [Manager IP Address] [Manager Port Number], and [SSL] in accordance with the

Manager environment.

Also, enter the [Activation Key] that is displayed in the number (1).

Click the [Set] button after entering them all. This starts communication with the Manager

and executes the activation.

The activation success updates the [Agent ID] on the page. (*2).

After the activation is completed, run the [Save and Reboot] in the [Exit] menu. If you turn

off the controller power without saving them, the settings cannot be saved so that is unable

to run accordingly.

*1 If the [HULFT IoT] menu does not appear, it indicates the SD card might not has been

identified. Check whether the SD card is inserted correctly.

*2 If the activation fails, it indicates communication with the Manager has not been per-

formed appropriately. Check whether the settings are correct.

Firewall might be blocking the communication. Check whether the port used in the

Manager and the access for a Java program are not blocked.

(3) Set the HULFT IoT Manager

Log into the Manager via web browser, and set the followings.

 Set the HULFT in the destination in the [Create

Unit].

An example)

Unit Name: HULFT-IoT-Te s t

Host Name of Receiver: TestServer

Port Number of Receiver: 30000

 Set the HULFT in the destination in the [Create

Profile].

An example)

Unit: HULFT-IoT-Te s t

Profile Name: TestProfile

[Transfer Settings] - [Add]

Settings Name: Test

Send Destination:

File ID: IOTTEST

Monitoring:

Monitored File Name: /tmp/hulftiot/file00.csv

* The monitored name has the setting specification.

See the No. (5) Edit the CONPROSYS task.

Monitoring Size: 1B

 Set the Agent in the [Agent].

An example)

[Action] - [Change Operation Settings]

Polling Interval: 1 minute

[Action] - [Change Unit]

Select the Unit created on the left.

[Action] - [Change Profile]

Select the Profile created on the left.

(4) Set the HULFT

Startup the counterpart of the HULFT, and set the followings.

- Set the [Host information]

An example)

Host Name: Agent ID checked in (2)

Transfer Code Set: UTF-8

- Set the [Receive management information]

An example)

File ID: IOTTEST

File Name: C:¥¥temp¥file00.csv

*Specify the existing folder location

(5) Edit the CONPROSYS task

Log into the CONPROSYS via web browser, and click the [Task Edit] to open the editing

page.

Assign Send HULFT IoT task. When the assigned task is executed, a Target file will be copied

as a send file.

Refer to Online Manual for editing the task.

Online Manual

http://data.conprosys.com/help/task/v1/en/

Send HULFT IoT task can select the target file from File00 to File19.

Change the monitored file name of the Manager [/tmp/hulftiot/fileXX.csv] in accordance

with the selected file number (FileXX).

An example) when File10 is selected, the monitored file name should be

[/tmp/hulftiot/file10.csv].

CONTEC CO., LTD.

3-9-31, Himesato, Nishiyodogawa-ku, Osaka 555-0025, Japan

https://www.contec.com/

No part of this document may be copied or reproduced in any form by any means

without prior written consent of CONTEC CO., LTD.

NA05993 (LYVR071) [12252017] December 2017 Edition

The content of the target file to be sent is made with [Logging] and [Logging(Str)] in pro-

cessing task.

Send HULFT IoT sample

1. In the [Timer], an Action is executed one time per minute.

In the example, the action proceeds to the next step at 00 second per minute.

2. In the [Logging(Str)], write a string [DateTime] and [CR+LF] (carriage return) in File00.

3. In the [Logging], write DateTime data and [CR+LF] (carriage return) in File00.

4. In the [Send HulftIoT], copy the content of File00 into /tmp/hulftiot/file00.csv.

5.Delete the File00(csv file).

 It is recommended that an action should be executed with Timer or Wait (Otherwise,

the file is copied continuously).

After making the processing task, save it by executing the [Save Task] in File menu. The

change will be reflected when the task is re-operated. If you intend to use the task again

after turning off the power of the controller, save it by executing the [Save to ROM].

3. SOFTWARE LICENSE AGREEMENT

PLEASE READ THIS SOFTWARE LICENSE AGREEMENT (the “Agreement”) CAREFULLY BE-

FORE OPENING THE PACKAGE OF, DOWNLOADING, INSTALLING, OR USING THE CONTEC’S

SOFTWARE. THIS AGREEMENT SET FORTH TERMS AND CONDITIONS REGARDING THE LI-

CENSE TO USE CONTEC’S SOFTWARE DESCRIBED IN THE LICENSE SHEET (the “Software”).

BY OPENING THE PACKAGE, DOWNLOADING, INSTALLING OR USING THE SOFTWARE,

CUSTOMERS ARE AGREEING TO BE BOUND BY THE AGREEMENT. IF CUSTOMERS DO NOT

AGREE TO THE AGREEMENT, CUSTOMERS MAY RETURN THE PRODUCT, WITHOUT OPEN-

ING THE PACKAGE, TO THE PLACE WHETERE CUSTOMERS OBTAINED IT FOR A REFUND.

CUSTOMERS MAY NOT OPEN THE PACKAGE OF, DOWNLOAD, INSTALL OR USE THE SOFT-

WARE WITHOUT AGREEING TO THE AGREEMENT.

Article 1. Intellectual Property Rights

The copyright, patent right or any other intellectual property right pertaining to the Soft-

ware or any documentary attachments, such as manuals or license sheets, as well as any

copies thereof (the “Software and the Like”) shall belong to CONTEC, and customers shall

have no rights therefor other than those expressly authorized herein.

Article 2. Permitted License

1. CONTEC grants customers a non-exclusive right to install and use, free of charge, the

Software solely for the purpose of using hardware products onto which the Software

has been installed.

2. Customers may copy the Software for a minimum number of times as necessary solely

for emergency backup purposes in using the Software. However, description regarding

any of the rights pertaining to the Software supplied by CONTEC shall be attached to

any such copies.

3. Customers may incorporate software provided by CONTEC as a library onto software

created by the customer.

Article 3. Restrictions on Use

Customers shall not:

(1) Create any derivative software from the Software other than as set forth herein;

(2) Copy the Software other than as set forth therein;

(3) Modify, adapt, decompile, disassemble or reverseengineer the Software; or

(4) Delete or alter the representation or trademark of the rights of the Software.

Article 4. Limited Liabilities

1. Except expressly warranted in article 7, CONTEC hereby disclaims any warranty with re-

spect to the software, either express, implied or statutory, including but not limited to,

the implied warranties of merchantability, of satisfactory quality, or fitness for a particu-

lar purpose and/or noninfringement of third party rights.

2. To the extent not prohibited by law, in no event shall CONTEC be lilable for personal in-

jury, or any incidental, special, indirect or any other commercial damages or losses, aris-

ing out of or related to your use or inability to use the software and the like.

Article 5. Transfer

1. Customers may transfer their rights authorized in accordance with this Agreement, to a

third party only when the customer satisfies all of the following conditions:

(1) The customer transfers the Software and the Like, or the Software installed in the

hardware to such third party together with the Agreement and the license sheet; and

(2) The recipient of the transfer agrees to the terms and conditions herein.

2. When the Software and the rights are transferred in accordance with Section 1 of Arti-

cle 5, the recipient of the transfer shall be deem to be bound by the Agreement from

the time of such transfer.

Article 6. Termination

1. CONTEC may terminate the Agreement with immediate effect without any notice or de-

mand to the customer if the customer fails to comply with any of the provisions herein.

2. Upon the termination of the Agreement, the customer’s license shall cease to be effec-

tive. The customer shall immediately discontinue using the Software in any way, and

shall uninstall and destruct any reproduction of the Software.

Article 7. Limited Warranty on Media

1. CONTEC warrants the media on which the Software is recorded and delivered by CON-

TEC to be free from defects in materials and workmanship under normal use for a pe-

riod of 30 days from the original retail purchase. Customers exclusive remedy shall be

replacement of the Software which is returned to CONTEC through the distributor.

Article 8. Information regarding the Software

1. The information and/or updated program will be delivered through the website of

CONTEC.

2. The information and/or updated program will be licensed to the Customers in accord-

ance with the Agreement.

Customers may use the information and/or updated program at their discretions and re-

sponsibilities, however, in case the Customers use such information and/or updated pro-

gram they shall comply with the terms and conditions of the Agreement.

Article 9. Export Control

1. Customers shall comply with the Foreign Exchange and Foreign Trade Act of Japan, the

U.S. Export Administration Regulation and the laws and regulations of any other coun-

try when taking the Software and the Like outside Japan.

2. Customers shall not transfer, export or re-export the Software and the Like to any indi-

vidual or entity that is likely to use the Software and the Like to design, develop or

manufacture nuclear weapons, biochemical weapons, or to design, develop or manu-

facture missiles.

3. Customers shall not transfer, export or re-export the Software and the Like to any indi-

viduals or entities set forth in the following countries or regions:

(1) The Republic of Cuba, The Islamic Republic of Iran, the Republic of Iraq, the Great

Socialist People’s Libyan Arab Jamahiriya or North Korea;

(2) Any individuals or entities on the “List of Foreign Users” based on the Import Trade

Control Order or the U.S.

Department of Commerce Denied Person’s List or Entity List; or

(3) Any country, region, individual or entity designated by the government of Japan, the

U.S. or any other relevant country.

Article 10. Governing Law

The provisions herein shall be construed and governed in accordance with the laws of Japan.

This Agreement shall not be governed by the United Nations Convention on Contracts for

the International Sale of Goods, the application of which is expressly excluded.

Article 11. Dispute Resolution

Upon the occurrence of any dispute in relation to the Agreement or the Software, if any

legal procedures are required, such as the filing of a petition for a lawsuit, the Osaka District

Court shall have the exclusive jurisdiction over such dispute.

Article 12. Severability

If for any reason any portion of the provisions set forth herein is found to be invalid or

unenforceable, the remainder of the Agreement shall not be affected in any way and shall

be valid and enforceable to the extent permitted by law.

⑤

④

③

②

①

Contec CPS-SD-HUL-01 Owner's manual

Contec CPS-SD-HUL-01 Owner's manual

Contec CPS-SD-HUL-01 Owner's manual

Related papers