Fixed Window Sash
Installation Instructions
Replacement/New Construction application
Note: This window is decorative and the individual panes
of glass are NOT weather sealed.
REQUIRED TOOLS
JAMB
HEADER
SHIM
SHIM
SHIM
SHIM SHIM
SILL
SHIM
JAMB
JAMB
HEADER
JAMB
SILL
SEALANT
(not
included)
TAPE
MEASURE
PAN HEAD
SCREWS
(not
included)
DRILL
DRIVER
STEP 1. Place the fixed utility widow sash
into the rough opening. Align the pre-
drilled holes of the installation clip
firmly against the rough opening and
fasten the window with 8 pan head
aluminum screws (not included) (See
Fig A).
STEP 2. Finally, seal around the inside
and the outside of the window with an
approved polyurethane based sealant
such as Vulkem
®
or 100% silicone window
and door caulk. Trim the interior and the
exterior of the window according to your
specifications (See fig. B).
A
USING SUPPLIED INSTALLATION CLIPS
B
-
1
TAFCO WINDOWS VBS2241S Installation guide
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
American Craftsman 3261786NPS Operating instructions
-
Andersen 100SHS2650 Installation guide
-
Pella 818L0100 User manual
-
-
-
-
-
-
-
Andersen CW135 R User manual
