®
DECORATIVE UTILITY TOP
SPECIFICATIONS/INSTALLATION
72.0”
30.0”
72.0”
0.5”
DIMENSIONSDESIGN STOCK NUMBERS
Decorative Utility Top weights 45 pounds
Decorative Utility Top is 0.5” thick (12.7 mm)
INSTALLATION INSTRUCTIONS
If installing on an existing horizontal surface:
1. Product should be stored in a controlled moderate climate for a minimum
of 72 hours prior to installation. Avoid storing in excessive heat/humidity
extremes.
2. Use on level, horizontal surfaces only.
3. Ensure existing surface is clean.
4. If you want the Decorative Utility Top to be permanent, you may use a
heavy duty adhesive, such as Liquid Nails®*, to keep the top stationary.
*refer to manufacturer’s recommendations
If installing table legs or fasteners:
Refer to the Compact Fabrication Manual at www.Wilsonart.com,
or scan the QR code on the right to watch a short video.
For fabrication techniques such as cutting, routing, or sanding,
refer to the Compact Fabrication Manual at www.Wilsonart.com.
CLEANING INSTRUCTIONS
Wipes down easily with soap and water. Bleach may cause discoloration. Refer
to the Care & Maintenance document at www.Wilsonart.com for approved
cleaners.
WARNING: Excessive scrubbing can dull or damage the finish and texture.
Antique Bourbon Pine
8215
Zinc Diamond Plate
Y0541
DESIGN FINISH TEXTURE
60 Matte Finish
-
1
Wilsonart Y0541605683072K Installation guide
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Volkswagen THE TOURAN Quick start guide
-
Audi A4 S4 User manual
-
Viking VGCC530-4B User manual
-
-
-
Elite Screens F80NWH User manual
-
Brother NV1200 User manual
-
Craftsman CTS205 User manual
-
-