Franklin Brass 176-6 Installation guide

Shower Rods

INSTALLATION: Install hanger type flanges and rod with 4 - #8 X 1-1/4" round head zinc plated

steel screws provided. Cover flanges to be on rod before installation of

hangers and rod. Slide cover flanges over hangers to complete installation.

Install adjustable tension mounted holders and rod by sizing rod 1-5/8" shorter

than wall opening. Insert rod into holders and tighten into position with

counterclockwise motion on threaded holder until secure.

SHOWER ROD - 176 & 177 SERIES

TECHNICAL DATA

1-3/4"

44 mm

"A"

2-3/8"

60.3 mm

3/4"

19 mm

2-1/2"

64 mm

1/2"

13 mm

1-3/4"

44 mm

1-3/4"

44 mm

1-3/4"

44 mm

5/8"

16 mm

1" O.D.

25 mm

Liberty Hardware Manufacturing Corporation • 140 Business Park Drive • Winston-Salem, NC 27107 • 800.542.3789 • www.libertyhardware.com