Technoline WT 755 User manual

WT 755
Technoline
Brand
Technoline
Model
WT 755
Category
Alarm clocks
Type
User manual

This manual is also suitable for

Technoline WT 755 is a radio-controlled analog alarm clock that automatically sets itself to the correct time and date using the DCF signal. It also features an alarm with a snooze function and automatic switch-off, as well as a backlight for easy reading in the dark.

Technoline WT 755 is a radio-controlled analog alarm clock that automatically sets itself to the correct time and date using the DCF signal. It also features an alarm with a snooze function and automatic switch-off, as well as a backlight for easy reading in the dark.

Radio-controlled
Analog Alarm Clock
Instruction Manual
WT 755
UM3 1
ON
OFF
Setting up
Pull down the lid of the battery (1) compartment (at the back of
the case). Insert a new battery (AA type, 1,5 V, LR6), observing
correct polarity as indicated in the battery compartment. Put lid
(1) back again.
Setting the clock automatically
The clock automatically sets itself to 4, 8 or 12 o'clock and then
starts receiving the signal. Once it has received the DCFsignal
and processed it accordingly (which takes up to 5 minutes), the
clock automatically displays the correct time. We recommend that
you do not put up or hang up the clock anywhere during this
process.
If the clock still has not set itself after 10 minutes, reception is
faulty or not possible at the chosen location. Repeat setting at a
different location. Before you do so, remove the battery for
about 1 minute, then put it back in the batter compartment.
Alarm functions
Set alarm time
Turn the set-alarm knob (2) in the direction of the arrow in order
to set the alarm time. Never turn the set-alarm knob in the
opposite direction since this could damage the works.
Attention! Please dispose of used batteries in
an ecologically safe manner.
Switch On alarm
Push the alarm ON/OFF button upwards. At the set alarm time,
the alarm sounds and the face is automatically illuminated for
5 seconds.
Interrupt alarm (snooze)
Press the button on top (4) of the alarm clock. The alarm is
interrupted for approx. 4-5 minutes and then sounds again. The
snooze function can be repeated 6 times within approx. 30
minutes of the set alarm time.
Automatic switch-off
If the alarm is not interrupted or switched off, it stops
automatically after approx. 2 minutes. It is re-activated 12 hours
later at the set time.
Switch off alarm
To switch off the alarm, push the alarm ON/OFF button (3) down.
Illumination
To be able to read the face of your alarm clock even when it is
dark, briefly press the button (4) on the top of the alarm clock.
The illumination function is activated for 5 seconds.
12
1
11
10
9
8
7
6
5
4
2
NIL BRAND RC509 MANUAL (ENG)
SIZE: W75 X H80 (mm)
BY EMILY TSOI 20/04/07
  • Page 1 1

Technoline WT 755 User manual

WT 755
Technoline
Brand
Technoline
Model
WT 755
Category
Alarm clocks
Type
User manual
This manual is also suitable for

Technoline WT 755 is a radio-controlled analog alarm clock that automatically sets itself to the correct time and date using the DCF signal. It also features an alarm with a snooze function and automatic switch-off, as well as a backlight for easy reading in the dark.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents