DreamGEAR DGWII-1097 User guide

Category
Game console accessories
Type
User guide

This manual is also suitable for

www.dreamgear.net
www.dreamgear.net
FOR TECHNICAL SUPPORT
PLEASE CONTACT: 1-877-999-DREAM
or support@dreamgear.net
CONTENTS
1 Neo Fit Mat
PUTTING THE NEO FIT ON
1. Lift up the Wii Fit Board and put it on its short side with the top
of the Wii Fit Board facing towards you.
2. Slide the first elastic strap of the Neo Fit over the legs of the Wii
Fit Board. Do the same with the other 3 straps until the Neo Fit is
completely on the Wii Fit Board.
TAKING THE NEO FIT OFF
1. To remove the Neo Fit, lift up the Wii Fit Board and put it on its
short side with the top of the Wii Fit Board facing towards you.
2. Slide the first elastic strap up and over the legs of the Wii Fit
Board. Do the same with the other straps until the Neo Fit is
completely off the Wii Fit Board.
TROUBLESHOOTING
Problem: The Neo Fit does not go on properly to the Wii Fit Board.
Solution: Make sure the elastic straps aren’t torn. Make sure there
aren’t any broken parts or anything else hindering proper insertion
on the Wii Fit Board.
Neo Fit
USER’S GUIDE
  • Page 1 1

DreamGEAR DGWII-1097 User guide

Category
Game console accessories
Type
User guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI