Pioneer AVIC F80 DAB User manual

Brand: Pioneer

Model: AVIC F80 DAB

Category: Car media receivers

Type: User manual

This manual is also suitable for

Operation Manual

!"#$%&''(!)

!"#$%&'*(!)

!"#$%&+'*(!)

!"#$%&+'*),

!"#$%&+''*(!)

!"#$%&+''*),

!"#$%"&$'!("#()*)&+,

English

!"#$%&'(')%"*

Be sure to read Important Information for the User first!

Important Information for the User includes the important information that you

must understand before using this product.

English

+
Thank you for buying this Pioneer product.
Please read through these instructions so you 
will know how to operate your model properly. 
After you have finished reading the instruc-
tions, keep this document in a safe place for 
future reference.
Important
The screens shown in the examples may 
differ from actual screens, which may be 
changed without notice for performance and 
function improvements.
ɷ!Precaution!..........................4
,-./0"-1"21./3 1 45"6/6-3 7"88888888888888888888888888888888&
9:-;.".<20"641;45
"88888888888888888888888888888888888888888888&
ɷ!Basic!operation!..................4
#</=>21?"@43."146/0"41A"B;1=.2-10"88888888888888888&
C3-./=.21?"7-;3"@3-A;=."4?4210.".</B.
"8888888888888888D
,-./0"-1";021?".</"E#F"@41/5
"8888888888888888888888888D
9AG;0.21?".</"E#F"@41/5"41?5/
"8888888888888888888888888D
H10/3.21?I/G/=.21?I=-11/=.21?"6/A2488888888888888888D
/NÚRSTTIMESTARTUP
"88888888888888888888888888888888888888888J
K-L".-";0/".</"0=3//10
"888888888888888888888888888888888888'
M;@@-3 ./A"9N"0-;3=/
"888888888888888888888888888888888888888O
F20@54721?".</"9N"-@/34.2-1"0=3//1
"88 888888888 8888888 O
M/5/=.21?"4"0-;3=/
"888888888888888888888888 888888888 8888888888 O
#<41?21?".</"A20@547"-3A/3"-B"0-;3=/0
"8888888888888O
P021?".</".-;=<"@41/5
"88888888888888888888888888888888888888O
ɷ!How!to!use!the!Navigation!
menu!screen!....................10
Q@/34.21?".</",4R2?4.2-1"6/1;"0=3//1"8888888888((
ɷ!How!to!use!the!map!.........12
K-L".-"3/4A".</"64@"0=3//1"88888888888888888888888888(+
Q@/34.21?".</"64@"0=3//1
"888888888888888888888888888888(+
P1A/30.41A21?".</"3-;./"?;2A41=/
"88888888888888888(S
"ROWSINGTHEDATAÚELD
"88888888888888888888888888888888888(&
ɷ!Searc hing!for!a!
destination!.......................14
K-L".-"@541"7-;3"3-;./"88888888888888888888888888888888888(&
M/43=<21?"B-3"4"5-=4.2-1":7"4AA3/00
"888888888888888(D
M/43=<21?"B-3"C-21.0"-B"H1./3/0."TCQHU
"8888888888888(D
M/5/=.21?"4"A/0.214.2-1"B3-6"0.-3/A"
5-=4.2-10
"888888888888888888888888888888888888888888888888888(V
M/5/=.21?"4"A/0.214.2-1"B3-6"0.-3/A"3-;./0
"88888(V
M/5/=.21?"4"5-=4.2-1"7-;"0/43=</A"B-3"
3/=/1.57
"88888888888888888888888888888888888888888888888888888(V
M/43=<21?"B-3"4"5-=4.2- 1";021?"W#- 6:21/A"
M/43=<X
"88888888888888888888888888888888888888888888888888888(J
M/43=<21?"B-3"4"5-=4.2-1":7".</"=--3A214./0
"8888(J
M/43=<21?"B-3"4"5-=4.2- 1":7"0=3-5521?".</"
64@
"88888888888888888888888888888888888888888888888888888888888(J
P021?".</"WY4@"E-=4.2-1X"0=3//1
"88888888888888888888(J
ɷ!Check ing!and!modifying!
the!current!r oute!..............18
Y-A2B721?".</"3-;./"8888888888888888888888888888888888888888('
ɷ!Regis tering!and!editing!
locations!and!routes........20
M.-321?"4"5-=4.2-1"21"WM4R/A"E-=4.2-1X"888888888888+Z
M.-321?"4"3-;./"21"WM4R/A"$-;./0X
"888888888888888888+Z
[A2.21?".</"0.-3/A"3-;./
"8888888888888888888888888888888888+Z
F/5/.21?"0.-3/A"3-;./0
"888888888888888888888888888888888888+Z
M4R21?"4"5-=4.2-1"40"41"45/3."@-21.
"88888888888888888+(
ɷ2 E C E I V I N G REALTIMETRAFÚC
information!(TMC)!............21
$ISPLAYINGTHEn4RAFÚC3UMMARYoSCREEN"88888888+(
6IEWINGTHETRAFÚCLIST
"8888888888888888888888888888888888888+(
#HECKINGTHETRAFÚCINCIDENTSONTHEMAP
"8888888++
7HENTRAFÚCINCIDENTSOCCURONYOURROUTE
"88888++
4UR N I N G  T H E TRAFÚCI N FOR M A T I O N ONORO F F
"88888888888++
ɷ!Check ing!useful!
infor mation!about!your!
trip!....................................22
F20@54721?".</"WP0/B;5"H1B-364.2-1X"6/1;"8888888++
$/=-3A21?"7-;3".34R/5"<20.-37
"88888888888888888888888888+S
P021?".</"\32@"#-6@;./3"6-A/
"88888888888888888888888+S
#45=;54.21?".</"B;/5"=-10;[email protected]
"8888888888888888888+&
ɷ!Custo mising!preferences!of!
the!navigation!..................24
#;0.-62021?".</"14R2?4.2-1"0/..21?0"888888888888888+&
H1B-364.2-1"-1"/4=<"[email protected]"-B"WM/..21?0X
"88888 8888+D
M/..21?".</"45/3."@-21."L43121?0
"8888888888888888888888+'
]/..21?".</"64@";@A4./
"8888888888888888888888888888888888+O
[^@41A21?".</";0/"-B".</"14R2?4.2-1"
B;1=.2-10
"888888888888888888888888888888888888888888888888888+O
#[email protected]:252.7"41A"=-11/=.2R2.7
"888888888888888888888888+O
ɷ!Bluetooth
®
!connection!.... 30
F20@54721?".</"W%5;/.--.<X"0=3//1"8888888888888888888SZ
$/?20./321?"7-;3"%5;/.--.<"A/R2=/0
"8888888888888888SZ
#-11/=.21?"4"3/?20./3/A"%5;/.--.<"A/R2=/"
641;4557
"888888888888888888888888888888888888888888888888888S(
ML2.=<21?"R202:252.7
"8888888888888888888 8888888888 888888888 8888 S(
[1./321?".</"CH,"=-A/"B-3"%5;/ .--.<"L23/5/00"
=-11/=.2-1
"888888888888888888888888888888888888888888888888S(
F20@54721?".</"A/R2=/"21B-364.2-1
"8888888888888888888S(
#5/4321?".</"%5;/.--.<"6/6-378888888888888888888888S(
[email protected]?"%5;/.--.<"0-B.L43/
"88888888888888888888888888S(
F20@54721?".</"%5;/.--.<"0-B.L43/"R/302-1
"888888S(
ɷ!HandsJfree!phoning!....... ..32
F20@54721?".</"@<-1/"6/1;"0=3//1"8888888888888888S+
Y4>21?"4"@<-1/"=455
"888888888888888888888888888888888888888S+
$/=/2R21?"4"@<-1/"=455
"88888888888888888888888888888888888S+
-INIMISINGTHEDIALCONÚRMATIONSCREEN
"888888888SS
#<41?21?".</"@<-1/"0/..21?0
"8888888888888888888888888SS
P021?".</"R-2=/"3/=-?12.2-1"B;1=.2-1
"888888888888888SS
,-./0"B-3"<41A0)B3//"@<-121?
"8888888888888888888888888SS
ɷ!Setup !for!iPod!/!iPhone!or!
smartphone!......................34
4HEBASICÛOWOFI0ODI0HONEORSMARTPHONE
0/.;@
"888888888888888888888888888888888888888888888888888888888S&
M/..21?".</"A/R2=/"=-11/=.2-1"6/.<-A888888888888S&
2C-A"I"2C<-1/"[email protected]:252.7
"88888888888888888888888888888S&
91A3-2A
™
"A/R2=/"=-6@4.2:252.78888888888888888888888888S&
H1B-364.2-1"-1".</"=-11/=.2-10"41A"B;1=.2-10"
B-3"/4=<"A/R2=/
"888888888888888888888888888888888888888888SD
ɷ!Radio!................................37
M.43 .21?"@3-=/A;3/"888888888888888888888888888888888888 88888 SJ
M.-321?".</"0.3-1?/0.":3-4A=40."
B3/_;/1=2/0
"88888888888888888888888888888888888888888888888SJ
F20@54721?".</"W$4A2-"0/..21?0X"0=3//1
"88888888888SJ
ɷ!Digital!Radio!.................... 38
F2?2.45"$4A2-".;1/3"-@/34.2-10"888888888888888888888888SO
M.43 .21?"@3-=/A;3/
"88888888888888888888888888888888888888888SO
E20./121?".-"4"3/=/1.":3-4A=40."T.26/"0<2B."
6-A/U
"8888888888888888888888888888888888888888888888888888888SO
M/5/=.21?"4"0/3R2=/"=-6@-1/1.
"8888888888888888888888SO
F20@54721?".</"WF9%"0/..21?0X"0=3//1
"8888888888888SO
ɷ!Disc!.......... ......... .......... ......40
M.43 .21?"@3-=/A;3/"888888888888888888888888888888888888 88888 &+
3ELECTINGÚLESFROMTHETRACKNAMELIST
"88888888888&+
3WITCHINGTHEMEDIAÚLETYPE
"88888888888888888888888888&+
M/43=<21?"B-3".</"@43."7-;"L41.".-"@547
"8888888888&+
Q@/34.21?".</"FNF"6/1;
"8888888888888888888888888888888&+
ML2.=<21?".</"0;:.2.5/I4;A2-"541?;4?/
"888888888888&+
Q@/34.21?".</"FNF"6/1;";021?".-;=<"@41/5"
>/70
"8888888888888888888888888888888 8888888888 8888888888 8888888 &+
ɷ# O M P R E S S E D ÚLES!.............43
M.43 .21?"@3-=/A;3/"TB-3"F20=U"88888888888888888888888888&D
M.43 .21?"@3-=/A;3/"TB-3"PM%IMFU
"88888888888888888888&D
/PERATIONSCOMMONTOALLÚLETYPES
"888888888888888&D
!UDIOÚLEOPERATIONS888888888888888888888888888888888888888&D
6IDEOÚLEOPERATIONS
"88888888888888888888888888888888888888&D
3TILLIMAGEÚLEOPERATIONS
"8888888888888888888888888888888&V
ɷ!iPod!..................................46
#-11/=.21?"7-;3"2C-A"8888888888888888888888888888888888888&J
M.43 .21?"@3-=/A;3/
"88888888888888888888888888888888888888888&J
M/5/=.21?"0-1?"-3"R2A/-"0-;3=/0"B3-6".</"
@547520."0=3//1
"8888888888888888888888888888888888888888888&J
P021?".<20"@3-A;=.`0"2C-A"B;1=.2-1"B3-6"7-;3"
2C-A
"88888888888888888888888888888888888888888888888888888888888&J
M/5/=.21?"4"0-1?"B3-6".</"520."3/54./A".-".</"
0-1?"=;33/1.57"@54721?"T521>"0/43=<U
"88888888888&'
P021?"9@@5/"Y;02="$4A2-
"8888888888888888888888888888888&'
ɷ!AppRadio!Mode!...............48
9@@$4A2-"Y-A/"#[email protected]:252.7"888888888888888888888888&'
P021?"9@@$4A2-"Y-A/
"88888888888888888888888888888888888&O
M.43 .21?"@3-=/A;3/
"88888888888888888888888888888888888888888&O
P021?".</">/7:-43A"TB-3"2C<-1/";0/30U
"88888888888&O
9AG;0.21?".</"264?/"02a/"TB-3"0643.@ <-1/"
T91A3-2AU";0/30U
"8888888888888888888888888888888888888888DZ
P021?".</"4;A2-"62^"B;1=.2-1
"88888888888888888888888888DZ
ɷ!Apple!CarPlay!................. .50
P021?"9@@5/"#43C547"88888888888888888888888888888888888888DZ
M.43 .21?"@3-=/A;3/
"88888888888888888888888888888888888888888DZ
M/..21?".</"A32R21?"@-02.2-1
"88888888888888888888888888888D(
9AG;0.21?".</"R-5;6/
"88888888888888888888888888888888888888D(
ɷ!Android!Auto
™
!.................51
P021?"91A3-2A"9;.-"8888888888888888888888888888888888888888D(
M.43 .21?"@3-=/A;3/
"88888888888888888888888888888888888888888D(
M/..21?".</"4;.-)54;1=<"B;1=.2-1
"888888888888888888888D+
M/..21?".</"A32R21?"@-02.2-1
"88888888888888888888888888888D+
!"#$%&'(')%"*
$-./0./1

S
9AG;0.21?".</"R-5;6/"88888888888888888888888888888888888888D+
ɷ!Bluetooth!audio!player!....53
M.43 .21?"@3-=/A;3/"888888888888888888888888888888888888 88888 DS
3ELECTINGÚLESFROMTHEÚLENAMELIST
"88888888888888DS
ɷ!HDMI!source.....................54
M.43 .21?"@3-=/A;3/"888888888888888888888888888888888888 88888 D&
ɷ!AUX!source!......................54
M.43 .21?"@3-=/A;3/"888888888888888888888888888888888888 88888 D&
M/..21?".</"R2A/-"02?145
"8888888888888888888888888888888888D&
ɷ!AV!input!............................55
M.43 .21?"@3-=/A;3/"TB-3"9N"0-;3=/U"88888888888888888DD
M.43 .21?"@3-=/A;3/"TB-3"=46/34U
"888888888888888888888DD
M/..21?".</"R2A/-"02?145
"8888888888888888888888888888888888DD
ɷ!MIXTRAX!..........................56
P021?"YHb\$9b"888888888888888888888888888888888888888888888DV
M.43 .21?"@3-=/A;3/
"88888888888888888888888888888888888888888DV
M/5/=.21?"41"2./6"B3-6".</"520.
"888888888888888888888888DV
M/5/=.21?"0-1?0"1-.".-":/"@547/A
"88888888888888888888DV
F20@54721?".</"WYHb\$9b"M/..21?0X"0=3//1
"8888 DJ
ɷ!Vehic le!equipment!
information!.......................57
P021?".</"N/<2=5/"%;0"4A4@./3"88888888888888888888888DJ
F20@54721?"-:0.4=5/"A/./=.2-1"21B-3 64.2-1
"88888 8 D'
F20@54721?".</"-@/34.21?"0.4.;0"-B".</"=5264./"
=-1.3-5"@41/5
"888888888888888888888888888888888888888888888D'
ɷ!System!settings!............... 58
F20@54721?".</"WM70./6X"0/..21?"0=3//1"8888888888D'
M/..21?".</"14R2?4.2-1"21B-3 6 4.2-1":43
"888888888888D'
M/..21?"14R2?4.2-1"0=3//1"21./33;@.2-1
"888888888888D'
M/..21?"%5;/.--.<"4;A2-"0-;3=/"4=.2R4.2-1
"888888D'
M/..21?".</"/R/3"0=3-55
"8888888888888888888888888888888888888D'
M/..21?".</"://@".-1/
"8888888888888888888888888888888888888D'
M/..21?".</"3/43"R2/L"=46/34
"88888888888888888888888888D'
M/..21?".</"0/=-1A"=46/34
"8888888888888888888888888888DO
M/..21?".</"=46/34"B-3"#46/34"N2/L"6-A/
"8888VZ
M/..21?".</"04B/"6-A/
"888888888888888888888888 888888888 888 VZ
M/..21?".</"A/6-"6-A/
"8888888888888888888888888888888888VZ
M/5/=.21?".</"070./6"541?;4?/
"88888888888888 88888888VZ
$/R/3021?".</"=5264./"=-1.3-5"0.4.;0"
A20@5478888888888888888888888888888888888888888888888888888888VZ
M/..21?".</">/7:-43A"541?;4?/"L2.<".</"
4@@52=4.2-1"B-3"2C<-1/88888888888888888888888888888888VZ
9AG;0.21?".</"3/0@-10/"@-02.2- 10"-B".</".-;=<"
@41/5"T.-;=<"@41/5"=452:34.2-1U
"888888888888888888VZ
M/..21?".</"A266/3
"88888888888888888888888888888888888888888V(
9AG;0.21?".</"@2=.;3/
"888888888888888888888888 888888888 88888 V(
$ISPLAYINGTHEÚRMWAREVERSION
"888888888888888888888V(
F20@54721?".</"-@/1"0-;3=/"52=/1=/0
"88888888888888V(
5PDATINGÚRMWARE
"888888888888888888888888888888888888888888V(
#</=>21?"0/10-3"5/43121?"0.4. ;0"41A"A32R21?"
0.4.;0
"88888888888888888888888888888888888888888888888888888888V+
#</=>21?".</"=-11/=.2-10"-B"5/4A0
"88888888888888888V+
ɷ!Audio!adjustments!..........63
F20@54721?".</"W9;A2-X"0/..21?"0=3//1"8888888888888VS
P021?"B4A/3I:4541=/"4AG;0.6/1.
"888888888888888888888VS
ML2.=<21?"0-;1A"6;.21?I4../1;4.2-1
"88888888888888VS
9AG;0.21?"0-;3=/"5/R/50
"8888888888888888888888888888888888VS
M/..21?".</"3/43"0@/4>/3"-;.@;.
"8888888888888888888888VS
M/..21?".</"0;:L--B/3"-;.@;.88888888888888888888888888VS
9AG;0.21?".</"=;.-BB"B3/_;/1=7"R45;/
"88888888888888VS
M/5/=.21?".</"520./121?"@-02.2-1
"88888888888888888888888VS
!DJUSTINGTHESPEAKEROUTPUTLEVELSÚNELY
"8888888V&
9AG;0.21?".</".26/"452?16/1.
"88888888888888888888888888V&
P021?".</"/_;4520/3
"8888888888888888888888888888888888888888 V&
9AG;0.21?".</"/_;4520/3"=;3R/"4;.-64.2=4557"
T9;.-"[cU
"88888888888888888888888888888888888888888888888888V&
ɷ!Theme!menu!....................66
F20@54721?".</"W\</6/X"0/..21?"0=3//1"88888888888VV
M/5/=.21?".</"L455@4@/3
"8888888888888888888888888888888888VV
M/..21?".</"255;6214.2-1"=-5-;3
"888888888888888888888888VV
M/5/=.21?".</".</6/"=-5-;3
"88888888888888888888888888888VV
M/5/=.21?".</"0.75/"-B".</"=5-=>
"88888888888888888888888VV
#<41?21?".</"@3/210.455/A"0@540<"0=3//1
"8888888VV
$/@52=4.21?".</"0/..21?0
"8888888888888888888888888888888888VJ
ɷ!Video!settings!..................67
M/..21?";@".</"R2A/-"@547/3"88888888888888888888888888888VJ
M/..21?".</"R2A/-"02?145"B-3".</"3/43"R2/L"
=46/34
"88888888888888888888888888888888 8888888888 888888888 888 V'
M/..21?".</"R2A/-"-;.@;."B-364.
"8888888888888888888888VO
ɷ!Favourite!menu!................69
#3/4.21?"4"0<-3.=;."8888888888888888888888888888888888888888VO
M/5/=.21?"4"0<-3.=;.
"8888888888888888888 8888888888 888888888 8 VO
$/6-R21?"4"0<-3.=;.
"88888888888888888888888888888888888888VO
ɷ!Other!functions!................69
M/..21?".</".26/"41A"A4./"8888888888888888888888888888888VO
M/..21?".</"WM-;1A"$/.32/R/3X"B;1=.2-1
"88 888888888 8 VO
#<41?21?".</"L2A/"0=3//1"6-A/
"88888888888888888888VO
M.-321?"0-1?"21B-364.2-1".-"41"2C-A"T2\;1/0
®
"
\4? ? 2 1 ? U
"8888888888888888888888888888888888888888888888888888JZ
M/5/=.21?".</"R2A/-"B-3".</"3/43"A20@547
"88888888888 JZ
M/..21?".</"41.2).</B."B;1=.2-1
"8888888888888888888888888JZ
$/0.-321?".<20"@3-A;=.".-".</"A/B4;5."
0/..21?0
"8888888888888888888 888888888 8888888888 888888888 888888 J(
ɷ!Appendix!..........................71
\3- ; :5/0<--.21?"888888888888888888888888888888888888888888888J(
[33-3"6/004?/0
"888888888888888888888888888888888888888888888J+
C-02.2-121?"./=<1-5-?7
"88888888888888888888888888888888888JD
K41A521?"543?/"/33-30
"8888888888888888888888888888888888888JV
$-;./"0/..21?"21B-364.2-1
"8888888888888888888888888888888J'
K41A521?"41A"=43/"-B"A20=0
"88888888888888888888888888888JO
C5474:5/"A20=0
"888888888888888888888888888888888888888888888888JO
F/.425/A"21B-3 64.2- 1"B-3"@5474:5/"6/A24
"888888888JO
%5;/.--.<
"8888888888888888888888888888888888888888888888888888888'+
MFK#
"888888888888888888888888888888888888888888888888888888888888'+
dY9IdYN
"8888888888888888888888888888888888888888 888888888 888 '+
eE9#
"88888888888888888888888888888888888888888888888888888888888888'+
F2Rb
"8888888888888888888888888 8888888888 888888888 8888888888 888888888 '+
99#
"888888888888888888888888888888888888888888888888888888888888888'S
]--?5/f"]--?5/"C547f"91A3-2A
™
"8888888888888888888888'S
91A3-2A"9;.-
"88888888888888888888888888888888888888888888888888'S
YHb\$9b
"8888888888888888888888888888888888888888888888888888888'S
F/.425/A"21B-364.2-1"3/?43A21?"=-11/=./A"2C-A"
A/R2=/0
"888888888888888888888888888888888888888888888888888888'S
P021?"4@@):40/A"=-11/=./A"=-1./1.
"88888888888888 'S
KFYH
"8888888888888888888888888888888888888888888888888888888888888'&
YKE
"888888888888888888888888888888888888888888888888888888888888888'&
HNQ,9"\/^.).-)M@//=<
"88888888888888888888888888888888888'&
,-.2=/"3/?43A21?"R2A/-"R2/L21?
"8888888888888888888888'&
,-.2=/"3/?43A21?"FNF)N2A/-"R2/L21?
"8888888888888 '&
.OTICEREGARDING-0ÚLEUSAGE
"88888888888888888888'&
,-.2=/"3/?43A21?"-@/1"0-;3=/"52=/1=/0
"8888888888'&
Y4@"=-R/34?/
"888888888888888888 888888888 8888888888 888888888 88 '&
P021?".</"E#F"0=3//1"=-33/=.57
"8888888888888888888888'&
3PECIÚCATIONS8888888888888888888888888888888888888888888888888'D
!"#$%&'(')%"*
$-./0./1

!"#$%&"'&('#$)'*+&,$,")-

.$/")$&)$,"0('1&#2$&0$2(3+$&4*##$)-

If the battery is disconnected or discharged, the memory will be

erased and must be reprogrammed.



Some of the settings and recorded contents will not be reset.

5*#*&%647$3#&#"&$)*%6)$

The information is erased by disconnecting the yellow lead from

the battery (or removing the battery itself).



Some of the settings and recorded contents will not be reset.

8$%$##('1&#2$&,(3)"9)"3$%%")

CAUTION

Pressing the -+)+& button resets settings and recorded

contents to the factory settings.

—

Do not perform this operation when a device is connected

to this product.

—

Some of the settings and recorded contents will not be

reset.

The microprocessor must be reset under the following

conditions:



Prior to using this product for the first time after installation.

 If this product fails to operate properly.

 If there appears to be problems with the operation of the

system.



If your vehicle position is shown on the map with a signifi-

cant positioning error.

1 Turn the ignition switch OFF.

2 Press the -+)+& button with a pen tip or other

pointed implement.

 Refer to Checking part names and functions on page 4

Settings and recorded contents are reset to the factory settings.

:4"6#&#2(%&,*'6*+

This manual uses diagrams of actual screens to describe oper-

ations. However, the screens on some products may not match

those shown in this manual depending on the model used.

;$*'( '1%&"/&<-,4"+%&=%$>&('&?2(%&

;*'6*+

X0000BT

This indicates model name that are supported

the described operations.

This indicates to touch an appropriate soft key

on the touch screen.

HOLD

This indicates to touch and hold an appropri-

ate soft key on the touch screen.

This indicates that there is a reference or

supplementary for the key or screen.

@2$3A('1&9*)#&'*,$%&*'>&

/6'3#("'%

F88DAB

F80DAB

1 2 3

5 6 7 8

F980DAB

F980BT

F9880DAB

F9880BT

1 LCD screen

2 #'. (//0) button

230456/7-.)51748-9035/7-.

!"#$%&'(')%"*

230456/7-. )51748-9035/7-.

3 ,"1

button

Press to display the map screen.

Press and hold to switch to the camera view

mode.

This function is available only when “ 2345(

637893($:;<=” or “>:?(637893($:;<=” is

set to “':”.

button

Press to display the top menu screen.

Press and hold to activate the voice recogni-

tion function.



Refer to Using the voice recognition func-

tion on page 33

5 ,'@+

button

Press to switch between the Application

screen and the AV operation screen.

Press to turn the display off.

Press and hold to turn the display off when

the Application screen is available.

When the display is turned off, touch the

screen to revert to the original screen.

&-A (

/ )

button

Press to return to the previous track (chapter)

or go to the next track (chapter).

Press and hold to perform fast reverse or fast

forwards.

Press to answer or end a call.

button

8 -+)+&

button



Refer to Resetting the microprocessor on

page 4

9 Disc-

slot



Refer to Inserting and ejecting a disc on

page 6

10 SD card

slot



Refer to Inserting and ejecting an SD

memory card on page 6

11 Auto EQ

micro-

phone

input jack

Use to connect a microphone for acoustical

measurement (sold separately).

12 Detachable faceplate

button

Press to remove the detachable faceplate from

this product.

The remote control CD-R33 (sold separately) is available.

 For details, refer to the remote control manual.

B)"#$3#('1&-"6)&9)">63#&*1*('%#&

#2$/#

F980DAB

F980BT

F9880DAB

F9880BT

CAUTION

 Do not expose the detachable faceplate to excessive shock

or disassemble it.



Never grip the buttons tightly or use force when removing

or attaching the detachable faceplate.



Keep the detachable faceplate out of reach of small

children to prevent them from placing it in their mouths.



After removing the detachable faceplate, keep it in a safe

place so it is not scratched or damaged.



Do not expose the detachable faceplate to direct sunlight

and high temperatures.



When removing or attaching the detachable faceplate, do

so after turning off the ignition switch (ACC OFF).

8$,"0('1&#2$&>$#*32*4+$&/*3$9+*#$

1 Press the button.

2 Gently grip the bottom of the detachable face-

plate and slowly pull it outward.

1 Detachable faceplate

:##*32('1&#2$&>$#*32*4+$&/*3$9+*#$

1 Slide the detachable faceplate all the way into

this product.

2 Push the lower part of the detachable faceplate

until you hear a click.

!"#$%&"'&6%('1&#2$&C@5&9*'$+

F88DAB

F80DAB

WARNING

 Keep hands and fingers clear of this product when

opening, closing, or adjusting the LCD panel. Be especially

cautious of children’s hands and fingers.



Do not use with the LCD panel left open. It may result in

injury in the event of an accident.

CAUTION

 Do not open or close the LCD panel by force. It may cause

a malfunction.



Do not operate this product until the LCD panel has

completely opened or closed. If this product is operated

while the LCD panel is opening or closing, the LCD panel

may stop at that angle for safety.



Do not place a glass or can on the open LCD panel.

:>76%#('1&#2$&C@5&9*'$+&*'1+$

F88DAB

F80DAB

1 Press the button.

2 Touch or to adjust the angle of the

LCD panel.

3 Touch .

Returns to the previous screen.

D'%$)#('1E$7$3#('1E3"''$3#('1&

,$>(*

CAUTION

 Do not insert anything other than a disc into the disc-

loading slot.



Do not insert anything other than SD memory cards into

the SD card slot.



Ejecting an SD memory card during data transfer can

damage the SD memory card. Be sure to eject the SD

memory card by the procedure described in this manual.



Do not press the button when an SD memory card is not

fully inserted. Doing so may damage the card.



Do not press the button before an SD memory card has

been completely removed. Doing so may damage the card.

!"#$%&'(')%"*

)51748-9035/7-.

D'%$)#('1&*'>&$7$3#('1&*&>(%3

D'%$)#('1&*&>(%3

F88DAB

F80DAB

1 Press the button.

2 Touch to open the LCD panel.

3 Insert a disc into the disc-loading slot.

F980DAB

F980BT

F9880DAB

F9880BT

1 Insert a disc into the disc-loading slot.

F7$3#('1&*&>(%3

F88DAB

F80DAB

1 Press the button.

2 Touch to open the LCD panel.

3 Remove the disc, and press the button.

F980DAB

F980BT

F9880DAB

F9880BT

1 Press the button.

D'%$) #('1&*'>&$7$3#('1&*'&<5&,$,")-&

3*)>

F88DAB

F80DAB

p This system is not compatible with the Multi Media Card

(MMC).

Compatibility with all SD memory cards is not guaranteed.

p This product may not achieve optimum performance with

some SD memory cards.

D'%$)#('1&*'&<5&,$,")-&3*)>

1 Press the button.

2 Touch to open the LCD panel.

3 Insert an SD memory card into the SD card

slot.

4 Press the button.

F7$3#('1&*'&<5&,$,")-&3*)>

1 Press the button.

2 Touch to open the LCD panel.

3 Press the middle of the SD memory card gently

until it clicks.

4 Pull the SD memory card out straight.

5 Press the button.

B+611('1&*'>&6'9+611('1&*&=<.&%#")G

*1$&>$0(3$

p This product may not achieve optimum performance with

some USB storage devices.

Connection via a USB hub is not possible.

p A USB cable is required for connection.

1 Pull out the plug from the USB port of the USB

cable.

2 Plug a USB storage device into the USB cable.

1 USB cable

2 USB storage device

p Check that no data is being accessed before pulling out the

USB storage device.

!"#$%&'(')%"*

)51748-9035/7-.

.MÐÆQRSSHLDÐRS@QSTO

1 Start the engine to boot up the system.

The “)8B84=(19CD937(.3:D<3D8” screen appears.

From the second time on, the screen shown will differ

depending on the previous conditions.

From the second time on, enter the password for the anti-

theft function if the password entry screen appears.

2 Touch the language.

3 Touch .

The “)739=;EC:8()8=<;” screen appears.

4 Touch the item.

 Refer to Information on the connections and functions for

each device on page 35

5 Touch .

F88DAB

F80DAB

F980DAB

F9880DAB

The “@"2("!&+!!"(1'F+-()+&&$!%” screen appears.

Proceeds to the next step.

F980BT

F9880BT

The warning message screen appears.

Proceeds to step 8.

6 Touch [*8G] or [!C].

 *8G (default):

Supplies power to a Digital Radio aerial. Select when using

the optional Digital Radio aerial (AN-DAB1 or CA-AN-

DAB.001) (sold separately) with this product.



!C:

Does not supply power. Select when using a passive aerial

with no booster.

7 Touch .

The warning message screen appears.

8 Touch ['A].

The top menu screen appears.

.MÐÆQRSSHLDÐRS@QSTOÐNEÐSGDÐM@UHF@G

#("'&%-%#$,

When you use the navigation function for the first time, an initial

setup process starts automatically. Follow the steps below.

You can change the language later using [-8DHC:3B] in the

“)8==H:DG” screen. Other settings can be restarted later

using [2S@QSÄ"NM×FTQ@SHNMÄ6HY@QC] in the “)8==H:DG”

screen.

1 Press the button.

2 Touch or .

3 Touch the language that you want to use on the

navigation screen, then touch [)8B84=].

4 Read the terms carefully, checking the details,

and then touch ["448;=] if you agree to the

conditions.

5 Touch [!8I=].

6 Touch the language that you want to use for

voice guidance messages, then touch [!8I=].

7 If needed, modify the unit settings, then touch

[!8I=].

8 If needed, modify the default route planning

options, then touch [!8I=].

9 Touch ["4=HJ3=8], then [!8I=].

A message saying that the connected online features are acti-

vated appears if you activate these services right away.



Refer to “':BH:8()89JH48G” settings on page 28

10 Touch the connected services you want to use,

then touch [!8I=].

The initial setup is now complete. The map screen appears and

you can start using the navigation system.

!"#$%&'(')%"*

)51748-9035/7-.

H"I&#"&6%$&#2$&%3)$$'%

Top menu screen

Application menu screen

Application operation screen

Time and date setting screen Setting menu screen

Phone menu screen

AV source selection screen

Favorite source icons

AV operation screen

Map screen

Navigation menu screen

!"#$%&'(')%"*

)51748-9035/7-.

By pressing the button on any screen you can display the

top menu screen.

The character string “"11)” is replaced with “";;B8(

6391B3K” when Apple CarPlay is running.

LMM@"2/LMN@"2

The character string “"11)” is replaced with “":?9CH?(

"<=C” when Android Auto is running.

If you select “1CO89('LL” on the AV source selection screen,

you can turn off almost all functions. The “1CO89('LL” mode

is released in the following cases:

— An incoming call is received.

— The rear view camera image is input when the vehicle

reverses.

— A button on this product is pressed.

— The ignition switch is turned off (ACC OFF), then turned on

(ACC ON).

To protect this product from damage, the cooling fan may

operate in “1CO89('LL” mode.

<699")#$>&:J&%"6)3$

You can play or use the following sources with this product.



Radio (FM, MW/LW)

 Digital Radio (DAB) (*1)

 CD

 ROM (compressed audio or video files on discs)

 DVD-Video

 Video-CD

The following sources can be played back or used by connecting

an auxiliary device.



USB

 SD (*2)

 iPod

 Bluetooth

audio



AV input (AV)

 AUX

 HDMI (*3)

p (*1) LMM@"2/LMN@"2/LPMN@"2/LPMMN@"2

(*2) LMM@"2/LMN@"2

(*3) LMM@"2

5(%9+*-('1&#2$&:J&"9$)*#("'&

%3)$$'

1 Press the button.

2 Touch the AV operation key.

1 AV operation key

The AV operation screen appears.

1 Displays the source list.

Recalls equalizer curves.



Refer to Using the equaliser on page 64

Shows the navigation information.

This is not displayed for some sources.

p This is not displayed when “!3JHD3=HC:(H:QC(OH:?CO” is set

to “'QQ”.



Refer to Setting the navigation information bar on page

<$+$3#('1&*&%"6)3$

<"6)3 $&"'&#2$&:J&%"6)3$&%$+$3#("'&

%3)$$'

1 Display the AV source selection screen.

2 Touch the source icon.

p When you select “)C<948('LL”, the AV source is turned off.

<"6)3$&"'&#2$&%"6)3$&+(%#

1 Display the source list.

 Refer to Displaying the AV operation screen on page 9

2 Touch the source key.

p When you select “)C<948('LL”, the AV source is turned off.

@2*'1('1&#2$&>(%9+*-&")>$)&"/&

%"6)3$%

@2*'1 ('1&#2$&>(%9+*-&")>$)&"/&%"6)3$&

(3"'%

1 Display the AV source selection screen.

2 Touch and hold a source icon, and drag the icon

to the desired position.

@2*'1 ('1&#2$&>(%9+*-&")>$)&"/&%"6)3$&

A$-%

1 Display the source list.

 Refer to Displaying the AV operation screen on page 9

2 Touch .

3 Drag the source key to the desired position.

=%('1&#2$&#"632&9*'$+

You can operate this product by touching the keys on the screen

directly with your fingers.

To protect the LCD screen from damage, be sure to touch the

screen only with your finger gently.

!"#$%&'(')%"*

)51748-9035/7-.

@",,"'&#"632&9*'$+&A$-%

 : Returns to the previous screen.

 : Closes the screen.

K9$)*#('1&+(%#&%3)$$'%

1 Touching an item on the list allows you to narrow down the

options and proceed to the next operation.

Appears when all characters are not displayed on the display

area.

If you touch the key, the rest are scrolled for display.

Appears when items cannot be displayed on a single page.

Drag the slider bar or the list to view any hidden items.

K9$)*#('1&#2$&#(,$&4*)

1 You can change the playback point by dragging the key.

p Playback time corresponding to the position of the key is

displayed while dragging the key.

This function is not available for some media or sources.

<I(#32('1&#2$&"9$)*#("'&9*'$+

1 Touch .

The hidden function keys appears.

This key does not appear for some AV sources.

K9$)*#('1&#2$&"'G%3)$$'&A$-4"*)>

1 Displays the characters that are entered.

2 Moves the cursor to the right or left for a number of charac-

ters equivalent to the number of touches.

Enters the characters in the text box.

4 Deletes the input text to the left of the cursor one letter at a

time. Touching and holding the key deletes the letters to the

left of the cursor in rapid succession.

Confirms the entry and proceeds to the next step.

6 Enters a space.

7 Switches between alphabet and numbers/symbols.

8 Switches between capital and lower case letters.

Displays the traffic screen.

Searches for your destination by the

address or coordinates, or searches

for the selected place of interest, etc.

Builds your route or edits the

route currently set.

Displays useful information to

support your driving.

Main Menu 1

(without a planned route)

:-;8/-86108/<08=5>7?5/7-.8@0.6814300.

!"#$%&'(')%"*

)51748-9035/7-. :-; 8/-86108/<08

=5>7?5/7-.8@ 0.68

14300.

((

You can also access the “SyncTool”

screen from this menu.

Displays information about your

navigation system.

The version information, or licenses

can be displayed, for example.

Main Menu 2

Configures the navigation-related

settings.

(without a planned route)

K9$)*#('1&#2$&!*0(1*#("'&,$'6&

%3)$$'

1 Press the ,"1 button.

2 Touch .

K#2$)&(#$,%

You will also see the following keys when you are navigating

without a planned route.

1 2

345

1 Returns to the map screen.

2 Displays notifications that contain important information.

3 Displays the location that you saved as a favourite.

4 Switches among 2D, 3D, and 2D North up view modes.

5 Displays the “4RDQÄ/QN×KDR” screen where you can create

new profiles or edit the existing profiles.

If multiple drivers are using this product, they can create

their own profiles with their own settings. If you select a new

profile, this product restarts so that the new settings can

take effect.

Displays the previous or next page of the navigation menu.

If there is no next or previous page, this item is grayed out.

on the upper right corner of the screen is used for

"#$6)*!6(";; connection.



Be sure read Expanding the use of the navigation functions

(page 29) before using the "#$6)*!6 function.

When you are navigating a planned route, the following route-re-

lated keys are available.

21345

1 Adds a waypoint.

2 Displays route alternatives, parts of the route to avoid, or

specific roads in your planned route to avoid.

Suspends and resumes the route guidance.

4 Displays the route in its full length on the map, and displays

route parameters and route alternatives.

Deletes your route or removes a waypoint.

!"#$%&'(')%"*

:-;8/-86108/<08=5>7?5/7-.8@0.6814300.

Most of the information provided by your navigation system

can be seen on the map. You need to become familiar with how

information appears on the map.

H"I&#"&)$*>&#2$&,*9&%3)$$'

p The following information marked with an asterisk (*)

appears only when a route is set.

Depending on the conditions and settings, some items may

not be displayed.

Shows the number and name of the street to be used (or

next guidance point).*

Shows the next guidance point (manoeuvre).*

The type of the event (turn, roundabout, exiting motorway,

etc.) is displayed.



Refer to Frequently shown route events on page 13

Shows the distance to the next guidance point

(manoeuvre).*

Shows the maneuver after the next maneuver.*

5 Indicates the current location of your vehicle. The apex of the

triangular mark indicates your orientation and the display

moves automatically as you drive.

When there is no GPS position, the triangular mark is

transparent. It shows your last known position.

Displays the data field.

7 Shows the name of the street (or city) that your vehicle is

travelling on (or in).

Indicates the current route.*

The route currently set is highlighted in colour on the map.

Indicates the progress to the final destination.*

:J&('/"),*#("'&4*)

AV information is displayed at the bottom of the map screen.

12 3 4

1 Touc h to di sp la y the AV sou rc e lis t.

2 Shows the current status of AV source briefly.

You can turn on or off the communication between the

"#$6)*!6(";; and the navigation system by touching the key.

p This setting is always turned on when you use the

"#$6)*!6(";; on an iPod / iPhone (the setting cannot

be changed).

Touc h to disp la y th e pho ne m en u sc re en .

 Refer to Displaying the phone menu screen on page 32

K9$)*#('1&#2$&,*9&%3)$$'

@2*'1 ('1&#2$&%3*+$&"/&#2$&,*9&

,*'6*++-

By default, even if the map scale is changed on the scrolled

map, it will return to the preset scale (according to the setting

in “#H8O;CH:=”of the “!3JHD3=HC:(,3;” settings) when the

current position map is displayed. If you change the scale of the

current position map, perform the following procedure.

1 Press the ,"1 button and touch .

2 Touch , and then touch [)8==H:DG].

3 Touch [!3JHD3=HC:(,3;], and then [,3;(

@HG;B3K].

4 Touch [#H8O;CH:=].

5 Drag the pop-up window and touch [,3:<3B].

6 Press the ,"1 button.

7 Touch or .

<,*)#&L"",

Your navigation system features “Smart Zoom” that works in

two ways:



When the route is set:

When approaching a turn, “Smart Zoom” will zoom in and

raise the view angle to enable you to easily recognise your

manoeuvre at the next junction. If the next turn is at a dis-

tance, it will zoom out and lower the view angle to be flat so

you can see the road in front of you.



When the route is not set:

“Smart Zoom” will zoom in if you drive slowly and zoom out

when you drive at high speed.

<I(#3 2('1&4$#I$$'&M5N&O5N&*'>&M5&

!")#2&69&0($I%

You can switch how the map is displayed. For 2D map view

mode, you can select between “Heading up” and “North up”.



Heading up:

The map display always shows the vehicle’s direction as

proceeding toward the top of the screen.



North up:

The map display always has north at the top of the screen.

The map orientation is fixed at “Heading up” when the 3D

map screen is displayed.

1 Press the ,"1 button.

2 Touch .

3 Touch the following key.

Each time you touch the key the setting changes.

Indicates 2D Heading up view mode is

currently selected.

Indicates 3D Heading up view mode is

currently selected.

Indicates 2D North up view mode is

currently selected.

There is a limit to map scaling in 3D map view mode. If the

map scale is zoomed out further, the map is zoomed out in

2D map.

:-;8/-86108/<08@59

!"#$%&'(')%"*

:-;8/-86108/<08@59

<3)"+ +('1&#2$&,*9&#"&#2$&9"%(#("'&-"6&

I*'#&#"&%$$

1 Press the ,"1 button.

2 Touch anywhere on the map or touch and drag

the map in the desired direction to scroll.

If you place the cursor on the desired location, a brief overview

about the location will appear at the top of the screen, showing

the street name and other information for the location.

3 Touch .

The map returns to the current position.

If you press the ,"1 button, the map returns to the current

position.

@"'#)"+&A$-%&"'&#2$&%3)"++$>&,*9

Rotates the map clockwise or

counterclockwise.

Changes the map view mode.

The current map mode is shown on the

control key.

Zooms in or out on the map.

You can also zoom out or in by

pinching or expanding the map.

Cancels map rotation.

Tilts the map angle up or

down.

You can change the vertical view

angle of the map in 3D mode

only.

Map screen (scrolled map)

='>$)%#*'>('1&#2$&)"6#$&

16(>*'3$

Once the route guidance begins, the system provides various

guides by voice, text indications and signs.

P)$Q6$'#+-&%2"I'&)"6#$&$0$'#%

The following are some examples of the maneuvers that are

displayed.

Icon Meaning

Turn lef t, t urn rig ht, tu rn back.

Go left on the roundabout, 3rd exit

(next manoeuvre).

Enter roundabout (manoeuvre after

the next manoeuvre).

Motorway entrance or motorway exit.

Board ferry or leave ferry.

Approaching the destination or a

waypoint.

C*'$&('/"),*#("'

When navigating on multilane roads, you will need to make sure

to take the proper lane for the recommended route.

!"#$%&'(')%"*

:-;8/-86108/<08@59

<(1'9"%#%

Signs are displayed at the top of the map.

R6'3#("'&0($I

If you are approaching a complex intersection, the map is

replaced with a 3D view of the junction.

p If the data for these items is not contained in the map data,

the information is not available even if there are signs on the

actual road.

When you set “'QQ89(,C=C9O3K()89JH48G” to “C:”, the

icon

appears while you are driving on motorways. Touch the icon

to open the details of the next few exits or service stations. In

addition, touch an item to show its location on the map. You can

set it as a waypoint easily.

!QNVRHMFÐSGDÐC@S@ÐÆDKC

The data fields are different when you are navigating a route and

when you have no specified destination. For example, the data

field provides the following information.



When the route is set:

Distance to final destination, time needed to reach the final

destination and estimated arrival time are shown.

 When the route is not set:

Direction or altitude is shown.

p Touching and holding the field allows you to display the

setting screen for the field.



Refer to @3=3(LH8B?G on page 27

The estimated time of arrival is an ideal value calculated

based on the speed limit value set in “,3IR();88?” of vehi-

cle type setting and the actual driving speed. The estimated

time of arrival is only a reference value, and does not guaran-

tee arrival at that time.



Refer to “-C<=8(198Q898:48G” settings on page 25

CAUTION

For safety reasons, these route-setting functions are not

available while your vehicle is in motion. To enable these

functions, you must stop in a safe place and put on the

handbrake.

Some information regarding traffic regulations depends on

the time when the route calculation is performed. Thus, the

information may not correspond with a certain traffic regula-

tion when your vehicle actually passes through the location

in question. Also, the information on the traffic regulations

provided applies for a passenger vehicle, and not for a truck

or other delivery vehicles. Always follow the actual traffic

regulations when driving.

[@8G=H:3=HC:(Q9C7(1EC:8] and [':BH:8()8394E] on the

“!8O(-C<=8(=CRRR” screen can be used when the "#$6)*!6(

";; connection is established.



Be sure read Expanding the use of the navigation functions

(page 29) before using the "#$6)*!6 function.

H"I&#"&9+*'&-"6)&)"6#$

The following is a summary of the route setting procedure.

1 Search for a destination using various methods

on the [!8O(-C<=8] menu.

The location you searched for appears on the “,3;(.C43=HC:”

screen.

2 Touch [)8B84=(3G(@8G=H:3=HC:].

 Refer to Using the “,3;(.C43=HC:” screen on page 17

The “-C<=8()<7739K” screen appears and countdown begins.

When the countdown ends, the guidance automatically starts.

If you touch the screen anywhere during the countdown, the

countdown stops and the screen will stay as it is.



Refer to Checking route information and preferences on page

3 Touch [)=39=(!3JHD3=HC:].

Your navigation system starts the route guidance.



Refer to Understanding the route guidance on page 13

A0534<7.?8B-3858C01/7.5/7-.

!"#$%&'(')%"*

:-;8/-86108/<08@59 A0534<7.?8B-3858

C01/7.5/7-.

<$*)32('1&/")&*&+"3*#("'&4-&

*>>)$%%

The most frequently used function is the address search in

which the address is specified and the location is searched.

Depending on the search results, some steps may be

skipped.

1 Press the ,"1 button and touch .

2 Touch [!8O(-C<=8].

3 Touch ["??98GG].

4 Touch the following text box and set the desti-

nation you are looking for.

 6C<:=9K:

By default, your navigation system proposes the country

where you are.

If you want to change the area to search set another country.



&CO:(C 9(1 CG= 4C ?8:

By default, your navigation system proposes the city/town

where you are. You can select the city/town using its postal

code instead of its name.



)=988=:

If the street name is not available, touch [%C(=C(&CO:] and

select the city/town. This way the centre of the selected city/

town becomes the destination of the route.



)8B84=(SC<G8(!<7T89(C9($:=89G84=HC::

This item will be displayed after you have set a street. If the

house number is not available, touch [%C(=C()=988=] and

select the street. This way the centre of the selected street

becomes the destination of the route.

After you touch the selected address to finish the address

search, the searched location appears on the Map screen.

5 Touch [)8B84=(3G(@8G=H:3=HC:], and then touch

[)=39=(!3JHD3=HC:].

Your navigation system starts the route guidance.

<$*)32('1&/")&B"('#%&"/&D'#$)$%#&

SBKDT

Information about various facilities (Points Of Interest – POI),

such as petrol stations, car parks or restaurants, is available. You

can search for a POI by selecting the category (or entering the

POI Name).

<$*)3 2('1&/")&BKD%&6%('1&9)$%$#&

3*#$1")($%

The preset search allows you to quickly find the most frequently

selected types of POIs.

1 Press the ,"1 button and touch .

2 Touch [!8O(-C<=8].

3 Touch [1B348G].

The preset search categories are as follows.



18=9CB()=3=HC:



"44C77C?3=HC:



-8G=3<93:=



1395H:D

When a route is not set, POIs are searched for around the

current position.

When the current position is not available either (no GPS sig-

nal), POIs are searched for around the last known position.

When a route is set, “18=9CB()=3=HC:” and “-8G=3<93:=” are

searched for along the route, and “"44C77C?3=HC:” and

“1395H:D” are searched for around the destination.

4 Touch the category.

5 Touch the POI.

The searched location appears on the map screen.

 If you touch , you can sort the results or show

the locations of all facilities on the map.

6 Touch [)8B84=(3G(@8G=H:3=HC:], and then touch

[)=39=(!3JHD3=HC:].

Your navigation system starts the route guidance.

<$*)3 2('1&/")&BKD%&4-&3*#$1")($%&

")&>()$3#+-&/)",&#2$&'*,$&"/&#2$&

/*3(+(#($%

You can search for POIs by their categories and subcategories.

You can also search for POIs by their names in each of their

categories.

1 Press the ,"1 button and touch .

2 Touch [!8O(-C<=8].

3 Touch [1B348G].

4 Touch [)8394E("7C:D("BB(1B348G].

5 Touch ["9C<:?(S898] and then select the area

in which the POIs should be searched for.

 63=8DC9K(#H8O:

You can select whether or not POI categories are displayed.



"9C<:?(S898:

Searches around the current position. Or, around the last

known position if the current position is not available. (The

results will be listed in order of the distance from this position.)

 $:(3(&CO::

Searches for a place within a selected city/town. (The results

will be listed in order of the distance from the centre of the

selected city/town.)



"9C<:?(@8G=H:3=HC::

Searches for a place around the destination of the current

route. (The results will be listed in order of the distance from

the destination.)

This key is active only when the route is set.

 "BC:D(-C<=8:

Searches along the current route, and not around a point

already set. This is useful when searching for a stopover that

results in a minimal detour, such as searching for petrol

stations or restaurants. (The results will be listed in order of

the length of the necessary detour.)

This key is active only when the route is set.

6 Select one of the categories, subcategories or

brands to narrow down the places.



If you touch [)8394E(TK(!378], you can search for

POIs by their names.

7 Touch the POI.

The searched location appears on the map screen.

 If you touch , you can change the sort method

of the results.

8 Touch [)8B84=(3G(@8G=H:3=HC:], and then touch

[)=39=(!3JHD3=HC:].

Your navigation system starts the route guidance.

!"#$%&'(')%"*

A0534<7.?8B-3858C01/7.5/7-.

<$*)3 2('1&/")&9)"0(>$)%&'$*)4-&#2*#&

"//$)&$,$)1$'3-&")&)"*>%(>$&*%%(%G

#*'3$&%$)0(3$%

Important

Never use this product to route to hospitals, police stations

or similar facilities in an emergency. Stop using any

functions relating to the hands-free phoning and please call

the appropriate emergency number.

You can search for locations that provide emergency or roadside

assistance in the surrounding areas.

This information does not necessarily correspond to actual

information. Utilise the information for your reference.

1 Press the ,"1 button and touch .

2 Touch [UG8Q<B($:QC973=HC:].

3 Touch [S8B;(!839TK].

The preset search categories are as follows.



639(-8;3H9



S83B=E



1CBH48



18=9CB()=3=HC:

4 Touch the category.

5 Touch the POI.

The searched location appears on the map screen.

 If you touch , you can change the sort method

of the results.

6 Touch [)8B84=(3G(@8G=H:3=HC:], and then touch

[)=39=(!3JHD3=HC:].

Your navigation system starts the route guidance.

<$+$3#('1&*&>$%#('*#("'&/)",&

%#")$>&+"3*#("'%

Storing locations you visit frequently saves time and effort.

Selecting an item from the list provides an easy way to specify

the position.

The list of saved locations contains two preset categories: SC78

and FC95.

This function is available if locations have been registered in

“)3J8?(.C43=HC:”.



Refer to Storing a location in “)3J8?(.C43=HC:” on page

1 Press the ,"1 button and touch .

2 Touch [!8O(-C<=8].

3 Touch [)3J8?(.C43=HC:].



If you touch and then [+?H=], you can edit the

details of saved locations.

4 Touch the entry.

The searched location appears on the map screen.

5 Touch [)8B84=(3G(@8G=H:3=HC:], and then touch

[)=39=(!3JHD3=HC:].

Your navigation system starts the route guidance.

<$+$3#('1&*&>$%#('*#("'&/)",&

%#")$>&)"6#$%

Storing routes you use frequently saves time and effort.

This function is not available if no routes have been regis-

tered in “)3J8?(-C<=8G”.



Refer to Storing a route in “)3J8?(-C<=8G” on page 20

1 Press the ,"1 button and touch .

2 Touch [!8O(-C<=8].

3 Touch to show the next page.

4 Touch [)3J8?(-C<=8G].

5 Touch the entry.

p You can add waypoints or change the final destination on the

“-C<=8(1B3::89” screen.



Refer to Building a route using “-C<=8(1B3::89” on page

6 Touch [)ECO(-C<=8], and then touch [)=39=(

!3JHD3=HC:].

Your navigation system starts the route guidance.

<$+$3#('1&*&+"3*#("'&-"6&

%$*)32$>&/")&)$3$'#+-

The places that were previously set as destinations or waypoints

have been automatically stored in “SHG=C9K”.

H(%#")-

1 Press the ,"1 button and touch .

2 Touch [!8O(-C<=8].

3 Touch to show the next page.

4 Touch [SHG=C9K].

5 Touch the entry.

The searched location appears on the map screen.

6 Touch [)8B84=(3G(@8G=H:3=HC:], and then touch

[)=39=(!3JHD3=HC:].

Your navigation system starts the route guidance.

<,*)#&H(%#")-

Smart History suggests these previously used locations as des-

tinations based on your navigation habits, using parameters like

the current time of day, the day of week, and the current location.

Smart History items are shown in the “!8O(-C<=8(=CRRR” screen

for easy access.

!"#$%&'(')%"*

A0534<7.?8B-3858C01/7.5/7-.

<$*)32('1&/")&*&+"3*#("'&6%('1&

U@",4('$>&<$*)32V

The “6C7TH:8?()8394E” feature lets you quickly find a place by

its name and search area.

The “6C7TH:8?()8394E” function also searches your stored

data.

1 Press the ,"1 button and touch .

2 Touch [!8O(-C<=8].

3 Touch [6C7TH:8?()8394E].

4 Touch the right text box to enter the country

and city/town.

5 Enter the name, address, or category of the

destination to the left text box, then touch .

6 Touch the entry.

The searched location appears on the map screen.

7 Touch the right of the list to narrow down the

search results.



If you touch a map data provider logo, you can

narrow down the list of results by showing the

results from the provider.

8 Touch [)8B84=(3G(@8G=H:3=HC:], and then touch

[)=39=(!3JHD3=HC:].

Your navigation system starts the route guidance.

<$*)32('1&/")&*&+"3*#("'&4-&#2$&

3"")>('*#$%

Entering a latitude and longitude pinpoints the location.

1 Press the ,"1 button and touch .

2 Touch [!8O(-C<=8].

3 Touch to show the next page.

4 Touch [6CC9?H:3=8G].

5 Enter the latitude value and touch ['A].

p When a value is already entered in the text field, delete the

value first.

You can change the display format of the latitude and

longitude to any of the following formats: decimal degrees;

degrees and decimal minutes; or degrees, minutes and

decimal seconds.

 When entering the coordinates in UTM format,

touch , then [U&,(6CC9?H:3=8G].

6 Enter the longitude value and touch [%CV].

p When a value is already entered in the text field, delete the

value first.

The searched location appears on the map screen.

7 Touch [)8B84=(3G(@8G=H:3=HC:], and then touch

[)=39=(!3JHD3=HC:].

Your navigation system starts the route guidance.

<$*)32('1&/")&*&+"3*#("'&4-&

%3)"++('1&#2$&,*9

Specifying a location after scrolling the map enables you to set

the position as a destination or waypoint.

1 Press the ,"1 button.

2 Touch and drag the screen to scroll the map.

3 Touch the location that you want to select as

your destination.

The cursor appears.

4 Touch [)8B84=(3G(@8G=H:3=HC:], and then touch

[)=39=(!3JHD3=HC:].

Your navigation system starts the route guidance.

=%('1&#2$&U; *9&C"3*#("'V&

%3)$$'

Once a location is searched, the “,3;(.C43=HC:” screen

appears. You can select some options for the route or displayed

map location before route calculation.

13 42

5 76

p If you touch the map, the cursor is placed at that position.

Also, you can scroll the map by dragging the map.

Zoom in/zoom out

p You can also pinch or expand the map to zoom in or out.

2 Cancels the “,3;(.C43=HC:” screen and displays the map of

the current position.

Returns the cursor to the initial position and the map scale

to the initial scale.

Shows the route setting preferences for route calculation.

Touc h the key s to ac ti va te or dea ct iv at e th e pr ef er en ce .

Calculates the route prioritising the use of

motorways when the key is activated.

Calculates the route prioritising the use of

per-use charged toll roads when the key is

activated.

Calculates the route prioritising the use of

ferries when the key is activated.

Calculates the route prioritising the use of car-

pool and HOV lanes when the key is activated.

Returns to the previous screen.

6 Sets the cursor position to your destination (or waypoint).

7 Displays the shortcuts.

 @8=3HB8?($:QC973=HC::

Shows the detailed information of the point.



)3J8(.C43=HC::

Saves the displayed location as your favourite location.

The saved location can be easily recalled later.



1B348G("9C<:?(6<9GC9:

Searches for POIs around the displayed location. Touch

the POI to show the “,3;(.C43=HC:” screen, and also set

the POI as the destination (or waypoint).

!"#$%&'(')%"*

A0534<7.?8B-3858C01/7.5/7-.

;">(/-('1&#2$&)"6#$

When navigation is already started, there are several ways to

modify the current route. The following sections describe some

of those options.

.6(+> ('1&*&)"6#$&6%('1&U8"6#$&

B+*''$)V

The “-C<=8(1B3::89” (or “,K(-C<=8”) feature lets you build your

route using the list of destinations.

Editing the list allows you to plan your route easily.

Once you set the route, you can edit your route using the

menu displayed as “,K(-C<=8”.

1 Press the ,"1 button and touch .

2 Touch [-C<=8(1B3::89] or [,K(-C<=8].

3 Touch one of the options.

1 Starting position (The current vehicle position is set as

default and [6<998:=(%1)(1CGH=HC:] is displayed.)



Refer to Changing the starting position on page 18

Calculates the route and shows the “-C<=8()<7739K”

screen.

Displays the options for the location.

 ,CJ8(U;W,CJ8(@CO::

Edits the order you want to visit the locations.



@8B8=8:

Deletes the destination or waypoint.



)3J8(.C43=HC::

Stores the location in “)3J8?(.C43=HC:”.



Refer to Storing a location in “)3J8?(.C43=HC:” on page 20



6E3:D8:

Changes the destination or waypoint to another location.

 )ECO(C:(,3;:

Shows the selected location on the map.

Displays the shortcuts.

 @8B8=8("BB:

Deletes all waypoints and the destination. Touch

[6C:=H:<8(FH=EC<=(-C<=8] to cancel the planned route.



';=H7HG8(F3K;CH:=G:

Changes the order of waypoints automatically so that the

route can be easily travelled. (If the resulting order is the

same as the current order, this option is invalid.)



';=H7HG8(-C<=8:

Changes the order of all waypoints and the destination

automatically so that the route can be easily travelled. (If

the resulting order is the same as the current order, this

option is invalid.)

Inserts a new waypoint.

6 Adds a new destination and changes the current destination

to the last waypoint.

@2*'1('1&#2$&%#*)#('1&9"%(#("'

The starting position for route can be changed from the current

position.

1 Press the ,"1 button and touch .

2 Touch [-C<=8(1B3::89] or [,K(-C<=8].

3 Touch [6<998:=(%1)(1CGH=HC:].

4 Touch [)8=()=39=(1CH:=] or [6E3:D8()=39=(1CH:=]

and then touch ['A].

5 Search for a location.

6 Touch [)8=()=39=(1CH:=] or [6E3:D8()=39=(1CH:=].

The selected position is set as the starting position for route

calculation.

7 Touch [)ECO(-C<=8] or [6C:=H:<8(FH=EC<=(

-C<=8].

The system starts route recalculation after [)ECO(-C<=8] is

touched, and then the “-C<=8()<7739K” screen appears. After

[)=39=(!3JHD3=HC:] is touched, your navigation system starts the

route guidance.

After [6C:=H:<8(FH=EC<=(-C<=8] is touched, the current posi-

tion map appears.

8$%#" )('1&#2$&36))$'#&9"%(#("'&*%&#2$&

%#*)#('1&9"%(#("'

1 Press the ,"1 button and touch .

2 Touch [-C<=8(1B3::89] or [,K(-C<=8].

3 Touch [6<998:=(%1)(1CGH=HC:].

4 Touch [2345(=C(%1)(1CGH=HC:] and then touch

[@8B8=8()=39=(1CH:=].

The starting position for route calculation returns to the current

position.

:>>('1&I*-9"('#%

1 Press the ,"1 button and touch .

2 Touch ["??(F3K;CH:=].

3 Search for a location.

4 Touch [)8B84=(3G(F3K;CH:=].

The route is recalculated, and the “-C<=8()<7739K” screen

appears. (When the waypoint is already set, the “,K(-C<=8”

screen appears. Touch [)ECO(-C<=8] and proceed to the next

step.)

5 Touch [)=39=(!3JHD3=HC:].

Your navigation system starts the route guidance.

@2$3A('1&)"6#$&*+#$)'*#(0$%

You can select another route and compare different route

alternatives.

1 Press the ,"1 button and touch .

2 Touch [@8=C<9G(X("B=89:3=HJ8G].

3 Touch ["B=89:3=HJ8(-C<=8G].

4 Touch any of the route calculate conditions.

You can see the approximate time required and total distance of

selected route alternatives. Touch any of the route alternatives to

see it on the map.

p If more than three route alternatives have been found, [,C98(

-8G<B=G] appears. Touch [,C98(-8G<B=G] to show the other

routes.

$<04D7.?85.C8@-C7BE7.?8/<0846330./83-6/0

!"#$%&'(')%"*

$<04D7.?85.C8@-C7BE7.?8/<0846330./83-6/0



For information about route calculation conditions, refer

to -C<=8(1B3::H:D(,8=EC? on page 25

5 Touch [)8B84=].

The selected route is applied as your current route.

@2$3A('1&>$#"6)&)"6#$%

You can check for detour routes that avoid the selected sections

or streets, or that avoid the road ahead. You can also check for

alternative routes.

1 Press the ,"1 button and touch .

2 Touch [@8=C<9G(X("B=89:3=HJ8G].

3 Touch one of the options.

 "B=89:3=HJ8(-C<=8G:

Shows the alternative routes.



Refer to Checking route alternatives on page 18



"JCH?();84H3B()84=HC:G:

Shows the route avoiding certain sections. Touch the list

item to select the section you want to avoid. The distance

and time difference, suggested route, current route, and

the section avoided are shown. Touch ["448;=] to apply the

suggested route.



UNHCÄ2ODBH×BÄ1N@C:

Shows the route avoiding certain road. Touch the list item to

select the road you want to avoid. Distance and time differ-

ence, suggested route, current route, section avoided are

shown. Touch ["448;=] to apply the suggested route.



"JCH?(-C3?("E83?:

Shows the route avoiding the road ahead. Touch [/] or [0] to

set the distance you want to avoid. Touch ["JCH?] to apply

the suggested route.



-8G=C98('9HDH:3B(-C<=8:

Cancels the route with avoidances and restores the previous

route.

The route set by ["B=89:3=HJ8(-C<=8G] cannot be

cancelled.

@2$3A ('1&)"6#$&('/"),*#("'&*'>&

9)$/$)$'3$%

Once you set the route, you can check a summary of the current

route.

1 Press the ,"1 button and touch .

2 Touch [-C<=8()<7739K].

3 Touch one of the options.

1 2

The conditions of the displayed route is shown in the upper left

by icon. The total length of the route and approximate required

time for the route in the lower left.

You can scroll the map by dragging the map.

1 Shows alternative routes.

 Refer to Checking route alternatives on page 18

Displays the shortcuts.

 -C<=8(198Q898:48G:

Shows the route setting preferences. If you change the

preferences, the route is recalculated.



$=H:8939K:

Shows all transit points in detail. Touch a transit point to

show its position on the map. If you touch ["JCH?] on the

map screen, the route is recalculated avoiding the transit

point (as much as possible).



)3J8(-C<=8:

Saves the displayed route. The saved route can be recalled

later.



1B348G("BC:D(-C<=8:

Searches for POIs along the displayed route. Touch the

POI to show the “,3;(.C43=HC:” screen, and also set the

POI as a waypoint.



)H7<B3=HC::

You can run a simulation of the navigation for the current

route, as a demonstration.



Refer to Watching the simulation of the route on page 19

Shows the information for a transit point on the route.

Touching the items allows you to see the location on the

map. Touch ["JCH?] and ["448;=] to set the location as a

location to avoid.

@*'3$ ++('1&#2$&36))$'#&)"6#$&

16(>*'3$

If you no longer need to travel to your destination, follow the

steps below to cancel the route guidance.

1 Press the ,"1 button and touch .

2 Touch [63:48B(-C<=8] or [@8B8=8(F3K;CH:=].

3 Touch one of the options.

If there are no waypoints on the route, touch [63:48B(-C<=8] to

cancel the route.

If there are waypoints on the route, touch [63:48B(-C<=8] to

cancel the route. Touch [@8B8=8(F3K;CH:=] to delete only the

nearest waypoint. In such case, the route is recalculated.

W*#32('1&#2$&%(,6+*#("'&"/&#2$&)"6#$

You can run a simulation of the navigation for the current route,

as a demonstration.

1 Set a route to your destination.

 Refer to Searching for a destination on page 14

2 Press the ,"1 button and touch .

3 Touch [-C<=8()<7739K], and then touch .

4 Touch [)H7<B3=HC:].

The simulation starts from the starting point of the route, and

using a realistic speed, it leads you through the whole recom-

mended route.

 Touch [6BCG8] to stop the simulation.

!"#$%&'(')%"*

$<04D7.?85.C8@-C7BE7.?8/<0846330./83-6/0

<#")('1&*&+" 3*#("'&('&U<*0$>&

C"3*#("'V

Storing your favourite locations in “)3J8?(.C43=HC:” allows you

to save the time and effort used on re-entering this information.

“)3J8?(.C43=HC:” can include your home location, workplace,

and places you have already registered.

<#")('1&-"6)&2",$&*'>&-"6)&I")AG

9+*3$&+"3*#("'

You can store one home location and one workplace location.

1 Press the ,"1 button and touch .

2 Touch [!8O(-C<=8], and then [)3J8?(.C43=HC:].

You can also display the “)3J8?(.C43=HC:” screen by touching

on the bottom of the screen when the navigation menu is

displayed.

3 Touch [SC78] or [FC95] and then touch ['A].

p When you have already stored your home or workplace,

touch [SC78] or [FC95] to show the location on the “,3;(

.C43=HC:” screen.

4 Search for a location.

 Refer to Searching for a destination on page 14

5 Touch ["??(=C()3J8?(.C43=HC:G].

The cursor position has been stored.

<#")('1&-"6)&/*0"6)(#$&+"3*#("'%

You can store a frequently visited location (such as a relative’s

home) to allow easy routing.

1 Press the ,"1 button and touch .

2 Touch [!8O(-C<=8], and then [)3J8?(.C43=HC:].

You can also display the “)3J8?(.C43=HC:” screen by touching

on the bottom of the screen when the navigation menu is

displayed.

3 Touch ["??(.C43=HC:].

4 Search for a location.

 Refer to Searching for a destination on page 14

5 Touch ["??(=C()3J8?(.C43=HC:G].

6 Enter the name if needed and then touch

The cursor position has been stored.

p In the on-screen keyboard, touching or enables you to

store the location as your home or workplace location.

F>(#('1&%#")$>&+"3*#("'%

Stored locations can be edited.

<I(#32('1&#"&#2$&$>(#&,">$

1 Press the ,"1 button and touch .

2 Touch [!8O(-C<=8], and then [)3J8?(.C43=HC:].

3 Touch , and then touch [+?H=].

The “)8B84=(.C43=HC:(=C(+?H=” screen appears.

8$'*,('1&%#")$>&+"3*#("'%

1 Switch to the edit mode.

 Refer to Switching to the edit mode on page 20

2 Touch the item you want to rename and touch

[-8:378].

p “SC78”and “FC95” cannot be renamed. The location can be

set again.

3 Enter the name and then touch .

4 Touch [@C:8].

5$+$#('1&%#")$>&+"3*#("'%

1 Switch to the edit mode.

 Refer to Switching to the edit mode on page 20

2 Touch the item you want to delete and touch

[@8B8=8].

p “SC78” and “FC95” cannot be deleted. The location can be

set again.

If you touch and then touch [@8B8=8("BB], all entries

(including the home and workplace locations) can be

deleted.

A message will appear asking you to confirm the deletion.

3 Touch ['A].

4 Touch [@C:8].

<#")('1&*&)" 6#$&('&U<*0$>&

8"6#$%V

Storing your favourite routes in “)3J8?(-C<=8G” allows you to

save the time and effort used on re-entering this information.

1 Set a route to your destination.

 Refer to Searching for a destination on page 14

2 Press the ,"1 button and touch .

3 Touch [-C<=8()<7739K], and then touch .

4 Touch [)3J8(-C<=8].

5 Enter the name if needed and then touch

F>(#('1&#2$&%#")$>&)"6#$

Stored routes can be edited.

8$'*,('1&%#")$>&)"6#$%

1 Press the ,"1 button and touch .

2 Touch [!8O(-C<=8], and then .

3 Touch [)3J8?(-C<=8G].

4 Touch , and then touch [+?H=].

5 Touch the item you want to rename and touch

[-8:378].

6 Enter the name and then touch .

7 Touch [@C:8].

5$+$#('1&%#")$>&)"6#$%

1 Press the ,"1 button and touch .

2 Touch [!8O(-C<=8], and then .

3 Touch [)3J8?(-C<=8G].

4 Touch , and then touch [+?H=].

5 Touch the item you want to delete and touch

[@8B8=8].

p If you touch and then touch [@8B8=8("BB], all entries can

be deleted.

6 Touch [@8B8=8].

F0?71/037.?85.C80C7/7.?8G-45/7-.185.C83-6/01

!"#$%&'(')%"*

F0?71/037.?85.C80C7/7.?8G-45/7-.185.C83-6/01

Page is loading ...

Pioneer AVIC F80 DAB User manual

Brand: Pioneer

Model: AVIC F80 DAB

Category: Car media receivers

Type: User manual

This manual is also suitable for

Download PDF

report

Pioneer AVIC F80 DAB User manual

This manual is also suitable for

Pioneer AVIC F80 DAB User manual

Related papers

Other documents