9
Timer
The timer can be used in two different ways:
■ To switch a hotplate off automatically
■ As a kitchen timer
Automatic hotplate switch-off
Enter a cooking time for the relevant hotplate. When the
cooking time has elapsed, the hotplate switches off
automatically.
Setting the cooking time:
1. Set the heat setting.
2. Touch the § symbol repeatedly until the indicator light for
the desired hotplate begins to flash.
‹‹ flashes in the timer
display.
3. Touch the + or - symbol. The default value appears.
+ symbol: 30 minutes
- symbol: 10 minutes
4. Touch the + or - symbol until the desired cooking time
appears on the timer display.
The cooking time flashes for a few seconds and then starts
counting down. If you have set a cooking time for several
hotplates, the shortest cooking time will be displayed. The
indicator lamps for the hotplates are lit.
When the cooking time has elapsed
When the cooking time has elapsed, the hotplate switches off.
‹ flashes in the hotplate indicator. A signal sounds for 10
seconds.
‹‹ flashes in the timer display and the indicator lamp
flashes. Turn off the hotplate control.
Changing the cooking time
Touch the
§ symbol repeatedly until the desired hotplate
indicator begins to flash. Use the + or - symbol to change the
cooking time.
Clearing the cooking time
Touch the
§ symbol repeatedly until the desired hotplate
indicator begins to flash. Touch the + and - symbol
simultaneously.
‹‹ flashes in the timer display.
Notes
■ If you wish to call up the cooking time for a hotplate, touch
the
§ symbol repeatedly until the desired hotplate indicator
lights up. The cooking time is displayed for 5 seconds.
■ You can set a cooking time of up to 99 minutes.
■ The automatic time limit also applies to the timer function.
■ You can use the pause function even if you have set a
cooking time.
■ The timer function is no longer active if there is a power cut.
Kitchen timer
You can use the kitchen timer to set a time of up to 99 minutes.
It runs independently of all the other settings.
To set the kitchen timer:
1. Touch the § symbol repeatedly until the indicator light for the
kitchen timer flashes.
‹‹ flashes in the timer display.
2. Touch the + or - symbol. The default value appears.
+ symbol: 10 minutes
- symbol: 5 minutes
3. Touch the + or - symbol until the desired cooking time
appears on the timer display.
The cooking time flashes for a few seconds and then starts
counting down. The shortest time set using the timer counts
down on the display.
When the cooking time has elapsed
A signal sounds once the time has elapsed.
‹‹ flashes in the
timer display and the indicator lamp for the kitchen timer
flashes. You can stop the signal ahead of time by touching the
§ symbol.
Changing the time
Touch the
§ symbol repeatedly until the display for the kitchen
timer flashes. Make your new settings.
Cancelling prematurely
Touch the
§ symbol repeatedly until the display for the kitchen
timer flashes. Touch the + and - symbol simultaneously. ‹‹
flashes in the timer display.
Notes
■ The kitchen timer continues to operate while the pause
function is activated.
■ The kitchen timer no longer functions after a power cut.
Switching off the input confirmation
When you touch a panel, a short sound confirms this. You can
switch this sound off.
1. Set all 4 hotplates to heat setting 3.
2. Switch off the hotplates one after the other from right to left.
3. Select a heat setting for a hotplate. Press the hotplate control
until a signal sounds.
4. Switch off the hotplate control.
You can also switch entry confirmation on again. Proceed in
exactly the same way as for switching off.