Pulsar DS98 Operating instructions
- Category
- Network switches
- Type
- Operating instructions
DS98 v.1.0/I
DIN rail mounted switch 9-port DS98 for 8 IP cameras
without power supply
CODE
TYPE
:
:
DESCRIPTION
DS98 9 8
).
).
8 .
8).
.
The -port PoE switch for up to IP cameras (48VDC power supply) in a metal enclosure with optional
possibility of DIN rail mounting (TH35
Caution! The set does not include a power supply (the NDR-75-48 or similar device is recommended (DIN rail
mounting
Automatic detection of any devices powered in the PoE standard is enabled at the 1 – ports of the switch
The UPLINK port is used for connection of another network device e.g. recorder. The LEDs at the front panel indicate
the operation status (description in the table.
The PoE technology ensures a network connection and reduces installation costs by eliminating the need to
supply a separate power cable for each device. This method allows supplying other network devices, such as IP
phone, wireless access point or router
EN**
wyjście TAMPER : przewody 30cm
Tel. +48-14-610-19-40, fax: +48-14- 610-19-50, www.pulsar.pl, e-mail: sales@pulsar.pl
Features:
· power supply of 8 IP cameras (48VDC)
· 9 10/100 Mb/s ports
· 8 PoE ports (data transfer and power supply)
· 15,4W for each PoE port, supports devices complaint
with the IEEE802.3af standard
· Supports auto-learning and auto-aging of MAC
addresses (1K size)
· Metal enclosure - color black RAL 9005
with optional possibility of DIN rail mounting
(TH35)
· Warranty – 2 year from the production date
Pulsar
®
DIN rail mounted switch 9-port DS98 for 8 IP cameras without power supply
wyjście TAMPER : przewody 30cm
Tel. +48-14-610-19-40, fax: +48-14- 610-19-50, www.pulsar.pl, e-mail: sales@pulsar.pl
PARAMETERS OF THE SWITCH
Ports
9 10/100Mb/s ports (8 x PoE + 1 x UPLINK)
with connection speed auto-negotiation and MDI/MDIX Auto Cross)
PoE power supply
IEEE 802.3af (1÷8 ports), 48V DC / 15,4W at each port *
Protocols, Standards
IEEE802.3, 802.3u, 802.3x CSMA/CD, TCP/IP
10BASE-T: 14880pps/port
Forwarding rate
100BASE-TX: 148800pps/port
Bandwidth
1,6Gbps
Transmission method
Store-and-Forward
Optical indication of operation
Switch power supply;
Link/Act;
PoE Status
Mains supply
48÷54V AC
Current up to
2,2A@48VAC max.
Supply power
96W „+ ”4, 5 „- ” 7, 8
Output current at the PoE ports (RJ45)
8 x 0,3A ΣI=2A (max.)
Output voltage at the PoE ports (RJ45)
Compatible with the supply voltage Vin=48VDC ÷ 54VDC
Short-circuit protection SCP and
overload protection OLP
180% ÷ 200% PSU power, manual restart (the fault requires
disconnection of the DC output circuit)
* The given value of 15,4W per port is the maximum value. The total power consumption should not exceed W when all PoE ports
are being used
.
96
ELECTRICAL PARAMETERS
MECHANICAL PARAMETERS
Enclosure dimensions
246 x 50 x 132 [mm] (WxHxD)
Mounting
For DIN rail TH35
Gross/Net weight
1,48 / 1,55 kg
Enclosure
Steel plate, DC01 1,0mm color black RAL 9005
Connectors
Power supply of the cameras: RJ45 socket
Power input: Φ 0,32-2,05 (AWG 28-12)
Pulsar
®
DIN rail mounted switch 9-port DS98 for 8 IP cameras without power supply
-
1
-
2
Pulsar DS98 Operating instructions
- Category
- Network switches
- Type
- Operating instructions
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Pulsar DSFA108 Operating instructions
-
-
-
-
-
-
-
-
-
Pulsar RSFUPS108R Operating instructions
