PYLE Audio PS-CL28 Operating instructions

Before operating the unit, please read these instructions thoroughly and retain

them for future reference:

Speaker(s) Operating Instructions:

To play auxiliary sources (cd, MP3 Player, computer etc...) through the

speakers, plug the unit's input line (found inside the zippered speaker

compartment) into the earphone jack of your CD, MP3 player or computer

and switch the AM/FM/AUX switch to AUX.

Then turn the power on with the “power/vol” knob and adjust volume

accordingly. It is advisable to have your auxiliary device set at a high volume

output.

Radio Operation:

* Turn "power /vol" knob clockwise to turn the power on and to increase

volume. The power indicator will light up when the unit is turned on

* Set the band selector to AM or FM.

* Turn the “tuner” knob to scan through frequencies and find your desired

radio station.

* Turn "power/vol" counterclockwise to turn power off or decrease the

volume.

* To listen with earphones: connect the earphone to the earphone jack located

on front of the radio. Music will not play through speakers when earphones

are plugged in

Specifications

Frequency range: AM 520KHZ-1600KHZ

FM 88MHZ -108MHZ

Power source: DC 9V (Battery size 1 x 9v)

AC/DC adapter (not included) 9V, 800 MILLIAMPS

Polarity: input positive, Output negative

Diameter of adapter plug: 5.5mm

Download PDF