Epson TM-U220-i KDS with VGA or COM User manual

Type
User manual
111-38-QUM-016
Rev 2.30
Station Print Only
About this Guide
This guide consists of 2 sections:
Overview A detailed description on what the KDS Station Print Only feature is.
How to Configure - A procedure that can be followed to configure this within a
Single or Multi-Station KDS system.
This guide is relevant for:
KDS FW: v2.30 and above
KDS Utility (Windows): v2.3.1.0 and above
Overview
A printer at a display station has the capability of bumping and printing the order or items
in that order. This creates a ticket or label for the order sent to that station.
It may be desirable to have this order printed immediately from a KDS station when
received. For example, if the items at that station are already prepared and simply require
a label. Enabling the “Station Print Only” function in a KDS display accomplishes this.
The KDS printer at that station then does not need a display attached nor a bump bar. An
order sent to it will be automatically bumped off and printed when received.
Prep Station 1
Prep Station 2
Prep Station 3 Station
Print Only
Figure 0.1 Sample Multi-station KDS setup showing a “Station Print Only” Station
Station Print Only
Quick User Manual
111-38-QUM-016
Rev 2.30
How to Configure
This procedure assumes you already have a Multi-Station KDS and wish to configure one
of the stations to bump and print the incoming order.
1. Select Displays.
2. Select which Display to configure.
3. Click “Station Print Only”.
4. Click “Apply KDS Settings.
Figure 1.1 Station Print Only
The printer at that station will now automatically bump and print an order ticket
immediately for every incoming order.
  • Page 1 1
  • Page 2 2

Epson TM-U220-i KDS with VGA or COM User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI