Black & Decker CHV1680 User manual

Type
User manual

Black & Decker CHV1680

The Black & Decker CHV1680 is a versatile tool that can be used for a variety of tasks around the home, workshop, or garden. With its powerful motor and durable construction, the CHV1680 is up to any task.

Here are just a few of the things you can do with the Black & Decker CHV1680:

  • Drive screws and bolts
  • Drill holes in wood, metal, and plastic
  • Sand wood and other materials
  • Cut metal and plastic
  • Grind metal

The CHV1680 is also lightweight and easy to use, making it ideal for both DIYers and professionals alike.

Black & Decker CHV1680

The Black & Decker CHV1680 is a versatile tool that can be used for a variety of tasks around the home, workshop, or garden. With its powerful motor and durable construction, the CHV1680 is up to any task.

Here are just a few of the things you can do with the Black & Decker CHV1680:

  • Drive screws and bolts
  • Drill holes in wood, metal, and plastic
  • Sand wood and other materials
  • Cut metal and plastic
  • Grind metal

The CHV1680 is also lightweight and easy to use, making it ideal for both DIYers and professionals alike.

Black & Decker, S.A. de C.V.
ESPECIFICACIONES
Input: 230
V~ (14W)
50Hz CHV1560
Output
: 18V
~
@ 300mA
Input: 230
V~
(11W) 50Hz CHV1680
Output
: 19V
~
@ 350mA
AUSTRALIA / NEW ZEALAND
2 YEAR REPLACEMENT GUARANTEE
Black & Decker welcomes you as a purchaser of this product from our range of Home, Workshop
Garden Tools and Accessories. All our products are engineered and manufactured to ensure the
highest standards of reliability and perfor mance Black & Decker guarantees this product for a
period of 2 years from the date of purchase against defects due to defective materials or
workmanship. If the product should become defective within the guarantee period, Black & Decker
will make good by replacement free of charge except for minor defects where the appliance
may be repaired. The guarantee provisions do not cover failure due to accident, misuse, abuse
negligence or nonobservation of local regulations on the part of the user.
Equally, the guarantee provisions do not apply where the appliance has been serviced by a person not
authorised by Black & Decker or serviced with non-approved parts and this has contributed to the fault
of the product. Superseded models without a replacement equivalent will either be repaired or (at Black
& Decker’s discretion) replaced with another product of similar retail value.
To claim on the guarantee, you will need to submit proof of purchase to the seller or an authorised repair
agent. You can check the location of your nearest authorised repair agent by contacting your local Black
& Decker office at the address indicated in this manual.
The provisions of the Black & Decker Home Appliance Replacement Guarantee as set out above are in
addition to the conditions and guarantees which are mandatorily implied by law through Trade
Practices Act 1974 (Australia) and Consumer Guarantee Act 1993 (New Zealand) and legislation.
The Black & Decker Guarantee supplements these rights.
DESIGNED FOR DOMESTIC PURPOSES ONLY
TRADE PRACTICES ACT 1974 (AUSTRALIA) &
CONSUMER GUARANTEE ACT 1993 (NEW ZEALAND)
AUSTRALIA
Black & Decker (Australia) Pty Ltd
NEW ZEALAND
Black & Decker New Zealand
81 Hugo Johnston Drive
PENROSE AUCKLAND NZ
Tel: (64) 9 579 7600
Fax:(64) 9 579 8200
Free Fax:0800339258
20 Fletcher Road,
MOOROOLBARK VIC 3138
Tel: (03) 8720 5100
Fax:(03) 97275940
ServiceDepartment:
Tel: (03) 8720 5132
Fax: (03) 9727 5934
For Repair or Service
See “Power Tools - Retail and Repairs
section of Yellow Pages, otherwise
Tel:1800 654 155 to be connected to
your nearest Service Agent.
SPECIFICATIONS
  • Page 1 1

Black & Decker CHV1680 User manual

Type
User manual

Black & Decker CHV1680

The Black & Decker CHV1680 is a versatile tool that can be used for a variety of tasks around the home, workshop, or garden. With its powerful motor and durable construction, the CHV1680 is up to any task.

Here are just a few of the things you can do with the Black & Decker CHV1680:

  • Drive screws and bolts
  • Drill holes in wood, metal, and plastic
  • Sand wood and other materials
  • Cut metal and plastic
  • Grind metal

The CHV1680 is also lightweight and easy to use, making it ideal for both DIYers and professionals alike.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI