Sony ICD-SX734 Quick start guide

ICD-SX734
Sony
Brand
Sony
Model
ICD-SX734
Category
Dictaphones
Type
Quick start guide

This manual is also suitable for

IC Recorder
Quick Start Guide
4-447-267-31(1)
© 2013 Sony Corporation Printed in China
ICD-SX734/SX1000
ˎ IC Recorder (1)
ˎ Stereo headphones (1)
ˎ USB connection support cable
(1)
ˎ Carrying case (1)
ˎ Stand(1)
ˎ Wind Screen (1) (ICD‑SX1000
only)
ˎ Quick Start Guide
ˎ Application Software, Sound
Organizer (Installer file stored in
the built‑in memory so that you
can install it to your computer.)
ˎ Help Guide (HTML file stored
in the built‑in memory so it
can easily be copied to your
computer.)
Check the supplied items.
ˎ Electret condenser microphone
ECM‑CS3, ECM‑TL3
ˎ USB AC adaptor AC‑U50AG
Optional accessories
Welcome to your new Sony IC recorder!
This is the Quick Start Guide, which provides you with instructions on the basic operations of the IC recorder.
Please read it carefully. We hope you enjoy using your new Sony IC recorder.
Parts and controls
Built‑in microphones (stereo) (L/R)
Built‑in zoom microphone (monaural)
Peak lamp (ICD‑SX1000 only)
Display window
SCENE button

(folder) button
 STOP button
Access lamp
 (play/enter) button (*
1
)
Speaker
Control button (, , (review/fast backward),
(cue/fast forward))
Strap hole (A strap is not supplied.)
USB connector compartment (The USB connector
is stored inside.)
POWER ON/OFF•HOLD switch
VOL –/+ (volume –/+) buttons (*
1
)
MENU button

A‑B (repeat A‑B) button
ERASE button
 REC/PAUSE (record/pause) button, recording
lamp
TRACK MARK button
USB DIRECT slide lever
 (microphone) jack (PLUG IN POWER) (*
1
)
 (headphones) jack
M2/microSD memory card slot (The card slot is in
the cover.) (*
2
)
DPC (SPEED)/KEY CTRL (control) switch
RESET button
*
1
These buttons and the jack have a tactile dot. Use it
as a reference point for operations, or to identify each
terminal.
*
2
In this Quick Start Guide, M2 and microSD cards are
generally referred to as a “memory card.” The M2/
microSD card slot is referred to as the “memory card
slot.”
Note
The illustrations used in this Quick Start Guide are based on the ICD‑SX1000 model.
These illustrations may look different from the model you are using, however, the buttons and controls used for
operations are the same.
Let’s try out your new IC recorder Utilizing Your Computer
Installing the help guide on your computer
By installing the help guide on your computer from the built‑in memory of the IC recorder, you can
search for detailed operations and possible solutions when a problem occurs.
Slide the USB DIRECT slide lever on the back of the IC recorder, and insert the USB
connector into the USB port of a running computer.
In Windows: Click [Computer] (or [My Computer]), then double-click [IC RECORDER]
[FOR WINDOWS].
In Mac: Double-click [IC RECORDER] on the desktop.
Install the help guide.
In Windows: Double‑click [Help_Guide_Installer] (or [Help_Guide_Installer.exe]).
In Mac: Double‑click [Help_Guide_Installer_for_mac.app]. (v10.5.8 or higher)
Follow the instructions that appear on the screen to proceed with installation.
After the installation completes, double-click the [Help_Guide_icdsx3_zz.htm] icon in the
desktop for Windows (or in Finder for Mac).
The help guide is displayed.
You can also view the help guide on the following Sony IC Recorder customer support home
page:
http://rd1.sony.net/help/icd/sx3/zz/
Copying files from the IC recorder to your
computer
You can copy the files and folders from the IC recorder to your computer to store them.
Connect the IC recorder to your computer.
Copy files or folders you want to transfer to your computer.
Drag and drop the files or folders you want to copy from “IC RECORDER” or “MEMORY CARD” to
the local disk on your computer.
To copy a file or folder (Drag and drop)
IC RECORDER or
MEMORY CARD
Your computer
Click and hold,
drag,
and then drop.
Disconnect the IC recorder from your computer.
Installing Sound Organizer
Install Sound Organizer on your computer.
Note
Sound Organizer is compatible with the Windows PC only. It is not compatible with Mac.
¼ When installing Sound Organizer, log in to an account with administrator privileges.
Slide the USB DIRECT slide lever on the back of the IC recorder, and insert the USB
connector into the USB port of a running computer.
If the IC recorder cannot be connected to a computer directly, use the supplied USB connection
support cable.
Make sure the IC recorder has been recognized properly.
While the IC recorder is connected to the computer, “Connecting” is displayed in the display
window of the IC recorder.
Go to the [Start] menu, click [Computer] (or [My Computer]), and then double-click [IC
RECORDER] [FOR WINDOWS].
Double-click [SoundOrganizerInstaller_V140] (or [SoundOrganizerInstaller_V140.exe]).
Follow the instructions that appear on the screen.
Make sure that you accept the terms of the license agreement, select [I accept the terms
in the license agreement], and then click [Next].
When the [Setup Type] window appears, select [Standard] or [Custom], and then click
[Next].
Follow the instructions on the screen and set the installation settings when you select [Custom].
When the [Ready to Install the Program] window appears, click [Install].
The installation starts.
When the [Sound Organizer has been installed successfully.] window appears, check
[Launch Sound Organizer Now], and then click [Finish].
Note
You may need to restart your computer after installing Sound Organizer.
Note
If you format the built‑in memory, all data stored there will be erased. (The Help Guide and the Sound Organizer
software will also be erased.)
On power
Operate the unit only on 3.7VDC with the built‑in
rechargeable lithium‑ion battery.
On safety
Do not operate the unit while driving, cycling or
operating any motorized vehicle.
On handling
ˎ Do not leave the unit in a location near heat
sources, or in a place subject to direct sunlight,
excessive dust or mechanical shock.
ˎ Should any solid object or liquid fall into the unit,
remove the battery and have the unit checked by
qualified personnel before operating it any further.
If you have any questions or problems concerning
your unit, please consult your nearest Sony dealer.
WARNING
Do not expose the batteries (battery pack or batteries installed) to excessive heat such as sunshine, fire or the like for a
long time.
Capacity (User available capacity *
1
*
2
)
ICD‑SX734 : 8GB (approx. 6.40GB = 6,871,947,674 Byte)
ICD‑SX1000 : 16GB (approx. 12.80GB = 13,743,895,347 Byte)
*
1
A small amount of the built‑in memory is used for file management and therefore not available for user storage.
*
2
When the built‑in memory is formatted with the IC recorder.
Dimensions (w/h/d) (not incl. projecting parts and controls) (JEITA)*
3
ICD‑SX734: approx. 39.6 mm x 108.6 mm x 14.9 mm
ICD‑SX1000: approx. 39.6 mm x 110.8 mm x 14.6 mm
Mass (JEITA)*
3
ICD‑SX734: Approx. 81 g
ICD‑SX1000: Approx. 82 g
*
3
Measured value by the standard of JEITA (Japan Electronics and Information Technology Industries Association)
Precautions
1. Charge.
Charge the IC recorder.
Slide the USB DIRECT slide lever in the direction of the arrow (‑
A), and insert the USB connector into the USB port of a running
computer (
‑B).
Charging starts.
When the battery is fully charged, the battery indicator will
indicate “
.”
Disconnect the IC recorder.
Make sure that the access lamp does not light. Then refer to the
help guide to remove the IC recorder safely.
2. Power on.
Turn the power on.
Slide and hold the POWER ON/OFF•HOLD switch in the direction
of “POWER ON/OFF” until the window display appears.
To turn the power off, slide and hold the POWER ON/OFF•HOLD
switch in the direction of “POWER ON/OFF” until the “Power Off”
animation is displayed.
¼ When you turn the power on again within 4 hours after the last time
you turned the power off, the power will come on quickly.
To prevent unintentional operations (HOLD)
¼ To release the IC recorder from the HOLD status, slide the POWER ON/
OFF•HOLD switch towards the center so that the projection on the
switch is aligned to the “•“ mark.
3. Set the date and time.
When the clock is not set, the “Set Date&Time” animation appears,
then the “Set Date&Time?” confirmation message appears.
Press or to select “Yes,” and then press (play/enter).
The year section begins to flash.
Press or to set the year (the last two digits of the year),
and then press (play/enter). Repeat this procedure to
set month, day, hour, and minute in sequence.
When you set the minute and press (play/enter), the clock
reflects the setting.
4. Select the display language.
Press MENU.
Press , press or to select , and then press
(play/enter).
Press or to select “Language,” and then press (play/
enter).
Press or to select the language that you want to use in
the display window, and then press (play/enter).
You can select the following languages:
Deutsch (German), English*, Español (Spanish), Français (French),
Italiano (Italian), Русский (Russian),
(Korean),
(Chinese),
(Chinese), (Thai)
* Default setting
Press STOP.
5. Record.
¼ Before you start using the IC recorder, make sure that you slide
the POWER ON/OFF•HOLD switch towards the center so that the
projection on the switch is aligned to the “•“mark to release the HOLD
status.
Place the IC recorder so that the built-in microphones face
the direction of the source to be recorded.
Press REC/PAUSE.
Recording starts and the recording lamp () lights in red.
¼ You can pause recording by pressing REC/PAUSE. Press REC/
PAUSE again to restart recording.
Press STOP (-A) to stop recording.
The access lamp (‑B) flashes in orange and the recording
stops.
6. Listen.
Press (play/enter).
Playback starts.
Adjust the volume by pressing VOL –/+.
Press STOP to stop playback.
7. Erase.
Once a file is erased, you cannot restore it.
Press ERASE.
“Erase?” is displayed and the file to be erased is played back for
confirmation.
Select “Execute” using or , and then press (play/
enter).
The “Erasing…” animation appears while the selected file is
being erased.
Additional features
Details of these additional features for recording, playback, and editing are included in the help guide.
ˎ Scene Selection
ˎ Add/Overwrite/Pre recording
ˎ Noise Cut
ˎ TRACK MARK (Track mark)
ˎ DPC (Digital Pitch Control)
ˎ A‑B Repeat
ˎ VOR (Voice Operated Recording)
ˎ Sound Effects
ˎ Easy Search
ˎ Divide
ˎ Sound Organizer editing software
Note
Depending on the country or region, some of the optional accessories are not available.
GB
KR
IC Recorder
빠른 사용 설명서
ICD-SX734/SX1000
ˎˎ ICˎ레코더(1)
ˎˎ 스테레오ˎ헤드폰(1)
ˎˎ USBˎ연결ˎ케이블(1)
ˎˎ 휴대용ˎ파우치(1)
ˎˎ 스탠드(1)
ˎˎ 윈드ˎ스크린(1)ˎ
(ICD-SX1000ˎ전용)
ˎˎ 빠른ˎ사용ˎ설명서
ˎˎ 응용ˎ소프트웨어,ˎSoundˎ
Organizer(컴퓨터에ˎ설치할ˎ
수ˎ있도록ˎ내장ˎ메모리에ˎ저장된ˎ
설치ˎ파일)
ˎˎ 도움말ˎ설명서ˎ
(HTMLˎ파일은ˎ내장ˎ메모리에ˎ
저장되어ˎ있으므로,ˎ컴퓨터에ˎ
쉽게ˎ복사할ˎ수ˎ있습니다.)
동봉품을ˎ확인하십시오.
ˎˎ 일렉트레트ˎ콘덴서ˎ마이크로폰ˎ
ECM-CS3,ˎECM-TL3
ˎˎ USBˎACˎ어댑터ˎAC-U50AG
옵션ˎ액세서리
SonyˎICˎ레코더를ˎ구입해ˎ주셔서ˎ감사합니다!
이것은ˎICˎ레코더의ˎ기본적인ˎ조작ˎ방법을ˎ설명한ˎ빠른ˎ사용ˎ설명서입니다.
주의해서ˎ읽어ˎ주십시오.ˎ또한ˎSonyˎICˎ레코더를ˎ즐겨ˎ주시기ˎ바랍니다.
각ˎ부분ˎ및ˎ조작ˎ스위치류ˎ
내장ˎ마이크로폰(스테레오)(좌/우)
내장ˎ줌ˎ마이크로폰(모노럴)
피크ˎ램프(ICD-SX1000ˎ전용)
표시창
SCENEˎ버튼

(폴더)ˎ버튼
 STOPˎ버튼ˎ
액세스ˎ램프
 (재생/입력)ˎ버튼(
*
1
)
스피커
조절ˎ버튼(,ˎ,ˎ(리뷰/고속되감기),ˎ
(큐/고속감기))
스트랩용ˎ홀(스트랩은ˎ부속되지ˎ않았습니다.)
USBˎ커넥터실(USBˎ커넥터가ˎ안에ˎ보관되어ˎ
있습니다.)
POWERˎON/OFF
•
HOLDˎ스위치
VOLˎ-/+(볼륨ˎ-/+)ˎ버튼(
*
1
)
MENUˎ버튼

ˎA-B(반복ˎA-B)ˎ버튼
ERASEˎ버튼ˎ
 REC/PAUSE(녹음/일시정지)ˎ버튼,ˎ녹음램프
TRACKˎMARKˎ버튼
USBˎDIRECTˎ슬라이드ˎ레버
 (마이크로폰)ˎ단자(PLUGˎINˎPOWER)(
*
1
)
 (헤드폰)ˎ단자
M2/microSDˎ메모리ˎ카드ˎ슬롯(카드ˎ슬롯은ˎ
커버에ˎ있습니다.)ˎ(
*
2
)
DPC(SPEED)/KEYˎCTRL(제어)ˎ스위치
RESETˎ버튼
*
1
ˎ이ˎ버튼과ˎ단자에는ˎ돌기가ˎ있습니다.ˎ조작ˎ기준이나ˎ각ˎ
단자를ˎ구별할ˎ때ˎ사용하십시오.
*
2
ˎ본ˎ빠른ˎ사용ˎ설명서에서ˎM2ˎ및ˎmicroSDˎ카드는ˎ
일반적으로ˎ"메모리ˎ카드"로ˎ지칭됩니다.ˎM2/
microSDˎ카드ˎ슬롯은ˎ"메모리ˎ카드ˎ슬롯"으로도ˎ
지칭됩니다.
참고ˎ사항
이ˎ도움말ˎ안내에ˎ사용된ˎ그림은ˎICD-SX1000ˎ모델에ˎ기반을ˎ둔ˎ것입니다.ˎ이러한ˎ그림은ˎ사용하는ˎ모델과ˎ
다르게ˎ보일ˎ수ˎ있지만,ˎ조작ˎ시ˎ사용하는ˎ버튼과ˎ제어ˎ스위치는ˎ동일합니다.
ICˎ레코더를ˎ사용해ˎ봅시다 컴퓨터ˎ활용하기
컴퓨터에ˎ도움말ˎ설명서ˎ설치하기
ICˎ레코더의ˎ내장ˎ메모리에서ˎ컴퓨터에ˎ도움말ˎ설명서를ˎ설치함으로써,ˎ문제가ˎ발생할ˎ때ˎ자세한ˎ조작ˎ
및ˎ가능한ˎ해결책을ˎ찾아ˎ볼ˎ수ˎ있습니다.ˎ
ˎ ICˎ레코더ˎ후면의ˎUSBˎDIRECTˎ슬라이드ˎ레버를ˎ밀고,ˎUSBˎ커넥터를ˎ실행중인ˎ컴퓨터의ˎ
USBˎ포트에ˎ삽입하십시오.
ˎ Windows:ˎ[컴퓨터](또는ˎ[내ˎ컴퓨터])를ˎ클릭하고ˎ[ICˎRECORDER]ˎˎ[FORˎ
WINDOWS]를ˎ더블ˎ클릭하십시오.ˎ
Mac:ˎ바탕화면의ˎ[ICˎRECORDER]를ˎ더블ˎ클릭하십시오.
ˎ 도움말ˎ설명서를ˎ설치합니다.
Windows:ˎ[Help_Guide_Installer](또는ˎ[Help_Guide_Installer.exe])를ˎ더블ˎ
클릭하십시오.
Mac:ˎ[Help_Guide_Installer_for_mac.app]를ˎ더블ˎ클릭하십시오.ˎ(v10.5.8ˎ또는ˎ이상)
화면에ˎ나타나는ˎ지시에ˎ따라ˎ설치를ˎ실행하십시오.
ˎ 설치를ˎ완료한ˎ후,ˎWindowsˎ바탕화면(Mac은ˎFinder에서)의ˎ[Help_Guide_icdsx3_
zz.htm]ˎ아이콘을ˎ더블ˎ클릭하십시오.ˎ
도움말ˎ설명서가ˎ표시됩니다.
또한ˎ다음의ˎSonyˎICˎRecorderˎ고객ˎ지원ˎ홈페이지에서ˎ도움말ˎ설명서를ˎ볼ˎ수도ˎ있습니다:
http://rd1.sony.net/help/icd/sx3/zz/
ICˎ레코더에서ˎ컴퓨터로ˎ파일ˎ복사하기
파일ˎ및ˎ폴더를ˎICˎ레코더에서ˎ컴퓨터로ˎ복사해서ˎ저장할ˎ수ˎ있습니다.
ˎ 컴퓨터에ˎICˎ레코더를ˎ연결하십시오.
ˎ 전송하고ˎ싶은ˎ파일ˎ또는ˎ폴더를ˎ컴퓨터에ˎ복사합니다.
복사하고ˎ싶은ˎ파일이나ˎ폴더를ˎ"ICˎRECORDER"ˎ또는ˎ"MEMORYˎCARD"에서ˎ컴퓨터의ˎ로컬ˎ
디스크로ˎ끌어다ˎ놓으십시오.
파일이나ˎ폴더를ˎ복사하려면(끌어놓기)
ICˎRECORDERˎ
또는
MEMORYˎCARD
컴퓨터ˎ
ˎ클릭한ˎ상태로
ˎ끌어다
ˎ놓으십시오.
ˎ 컴퓨터에서ˎICˎ레코더를ˎ분리합니다.
SoundˎOrganizerˎ설치
컴퓨터에ˎSoundˎOrganizer를ˎ설치합니다.
참고ˎ사항
SoundˎOrganizer는ˎWindowsˎPC에만ˎ호환됩니다.ˎMac에는ˎ호환되지ˎ않습니다.
ˎ¼ SoundˎOrganizer를ˎ설치하려면,ˎ관리자ˎ권한으로ˎ계정에ˎ로그인하십시오.
ˎ ICˎ레코더ˎ후면의ˎUSBˎDIRECTˎ슬라이드ˎ레버를ˎ밀고,ˎUSBˎ커넥터를ˎ실행중인ˎ컴퓨터의ˎ
USBˎ포트에ˎ삽입하십시오.
ICˎ레코더를ˎ컴퓨터에ˎ직접ˎ연결할ˎ수ˎ없으면,ˎ부속ˎUSBˎ연결ˎ케이블을ˎ사용하십시오.
ˎ ICˎ레코더가ˎ제대로ˎ인식되었는지ˎ확인하십시오.
ICˎ레코더가ˎ컴퓨터에ˎ연결되어ˎ있는ˎ동안ˎICˎ레코더의ˎ표시창에ˎ"Connecting"이ˎ표시됩니다.
ˎ [시작]ˎ메뉴로ˎ가서ˎ[컴퓨터](또는ˎ[내ˎ컴퓨터])를ˎ클릭하고,ˎ[ICˎRECORDER]ˎˎ[FORˎ
WINDOWS]를ˎ더블ˎ클릭하십시오.
ˎ [SoundOrganizerInstaller_V140](또는ˎ[SoundOrganizerInstaller_V140.exe])을ˎ
더블ˎ클릭하십시오.
화면에ˎ나타나는ˎ지시를ˎ따르십시오.
ˎ 라이센스ˎ계약ˎ조건에ˎ동의함을ˎ확인하고,ˎ[Iˎacceptˎtheˎtermsˎinˎtheˎlicenseˎ
agreement]를ˎ선택한ˎ다음ˎ[Next]를ˎ클릭하십시오.
ˎ [SetupˎType]ˎ창이ˎ나타나면ˎ[Standard]ˎ또는ˎ[Custom]을ˎ선택하고ˎ[Next]를ˎ
클릭하십시오.
화면의ˎ지시를ˎ따르고ˎ[Custom]을ˎ선택하였으면ˎ설치ˎ세팅을ˎ설정하십시오.
ˎ [ReadyˎtoˎInstallˎtheˎProgram]ˎ창이ˎ나타나면ˎ[Install]을ˎ클릭하십시오.
설치가ˎ시작됩니다.
ˎ [SoundˎOrganizerˎhasˎbeenˎinstalledˎsuccessfully.]ˎ창이ˎ나타나면,ˎ[Launchˎ
SoundˎOrganizerˎNow]를ˎ확인하고ˎ[Finish]를ˎ클릭하십시오.
ˎ참고ˎ사항
SoundˎOrganizer를ˎ설치한ˎ후ˎ컴퓨터를ˎ재시작해야ˎ할ˎ수도ˎ있습니다.
참고ˎ사항
내장ˎ메모리를ˎ포맷하면ˎ내장ˎ메모리에ˎ저장된ˎ모든ˎ데이터가ˎ삭제됩니다.(도움말ˎ설명서와ˎSoundˎOrganizerˎ
소프트웨어도ˎ소거됩니다.)
전원에ˎ대하여
내장ˎ리튬ˎ이온ˎ충전지로ˎ3.7VˎDC에서만ˎ본ˎ제품을ˎ
사용하십시오.
안전성에ˎ대하여
자전거나ˎ오토바이ˎ또는ˎ자동차ˎ운전ˎ중에는ˎ본ˎ제품을ˎ
사용하지ˎ마십시오.
취급에ˎ대하여
ˎˎ 본ˎ제품은ˎ난방ˎ기구ˎ가까이나ˎ직사광선이ˎ닿는ˎ장소,ˎ
먼지나ˎ진동이ˎ심한ˎ장소에ˎ방치하지ˎ마십시오.
ˎˎ 금속ˎ물체나ˎ액체가ˎ본체ˎ내부로ˎ들어갔을ˎ때에는ˎ
사용을ˎ중지하고ˎ배터리를ˎ꺼낸ˎ후ˎ기술자의ˎ점검을ˎ
받으십시오.
본ˎ제품에ˎ대한ˎ질문이나ˎ문제점은ˎ가까운ˎSonyˎ
대리점으로ˎ문의하십시오.
경고
배터리(설치한ˎ배터리ˎ또는ˎ배터리ˎ팩)를ˎ햇빛이나ˎ불ˎ등ˎ과열에ˎ장시간ˎ노출하지ˎ마십시오.
이ˎ기기는ˎ가정용(B급)ˎ전자파적합기기로서ˎ주로ˎ가정에서ˎ사용하는ˎ것을ˎ목적으로ˎ하며,ˎ모든지역에서ˎ사용할ˎ수ˎ
있습니다.
상호명：소니코리아(주)
기자재명：ICˎRecorder
모델명：ICD-SX734/SX1000
제조자/제조국가：SonyˎCorporation/China
용량(사용자가ˎ사용ˎ가능한ˎ용량
*
1
*
2
)
ICD-SX734:ˎ8ˎGB(약ˎ6.40ˎGBˎ=ˎ6,871,947,674ˎ바이트)
ICD-SX1000：16ˎGB(약ˎ12.80ˎGBˎ=ˎ13,743,895,347ˎ바이트)
*
1
ˎ 내장ˎ메모리의ˎ일부는ˎ파일ˎ관리에ˎ사용되므로ˎ사용자ˎ저장소로ˎ사용할ˎ수ˎ없습니다.
*
2
ˎICˎ레코더를ˎ사용해ˎ내장ˎ메모리를ˎ포맷한ˎ경우.
사용상의ˎ주의
1.ˎ충전합니다.
ˎ ICˎ레코더를ˎ충전합니다.
USBˎDIRECTˎ슬라이드ˎ레버를(-A)ˎ화살표ˎ방향으로ˎ
밀고,ˎUSBˎ커넥터를ˎ실행중인ˎ컴퓨터의ˎUSBˎ포트(
-B)에ˎ
삽입하십시오.
충전이ˎ시작됩니다.
배터리가ˎ완전히ˎ충전되면,ˎ배터리ˎ표시기가ˎ"
"으로ˎ
표시됩니다.
ˎ ICˎ레코더를ˎ분리하십시오.
액세스ˎ램프가ˎ켜지지ˎ않았는지ˎ확인하십시오.ˎ
ICˎ녹음기를ˎ안전하게ˎ제거하려면ˎ도움말ˎ설명서를ˎ참조하십시오.
2.ˎ전원을ˎ켭니다.
ˎ 전원을ˎ켜십시오.
표시창이ˎ나타날ˎ때까지ˎPOWERˎON/OFF
•
HOLDˎ스위치를ˎ
"POWERˎON/OFF"ˎ방향으로ˎ민ˎ상태로ˎ누르고ˎ있으십시오.
전원을ˎ끄려면ˎ"PowerˎOff"ˎ애니메이션이ˎ나타날ˎ때까지ˎPOWERˎ
ON/OFF
•
HOLDˎ스위치를ˎ"POWERˎON/OFF"ˎ방향으로ˎ밀고ˎ
있으십시오.
ˎ¼ 마지막으로ˎ전원을ˎ끈ˎ후ˎ4시간ˎ이내에ˎ다시ˎ전원을ˎ켜면,ˎ전원이ˎ즉시ˎ
켜집니다.
오조작을ˎ방지하려면
(HOLD)
ˎ¼ ICˎ레코더를ˎHOLDˎ상태로부터ˎ해제하려면,ˎPOWERˎON/OFF
•
HOLDˎ
스위치를ˎ중앙으로ˎ밀어서ˎ스위치의ˎ돌출부가ˎ"
•
"ˎ마크에ˎ오도록ˎ
하십시오.
3.ˎ날짜와ˎ시간을ˎ설정합니다.
시간이ˎ설정되어ˎ있지ˎ않으면,ˎ"SetˎDate&Time"ˎ애니메이션이ˎ
나타난ˎ다음ˎ확인ˎ메시지ˎ"SetˎDate&Time?"가ˎ표시됩니다.
ˎ ˎ또는ˎˎ버튼을ˎ눌러ˎ"Yes"를ˎ선택한ˎ다음ˎ(재생/입력)
을ˎ누르십시오.
연도ˎ구간이ˎ깜빡입니다.
ˎ ˎ또는ˎˎ버튼을ˎ눌러ˎ연도(마지막ˎ두ˎ자릿수)를ˎ설정한ˎ다음ˎ
(재생/입력)을ˎ누릅니다.ˎ이ˎ절차를ˎ반복하여ˎ월,ˎ일,ˎ시,ˎ
분을ˎ차례로ˎ설정하십시오.
분을ˎ설정하고ˎ(재생/입력)을ˎ누르면ˎ설정이ˎ시계에ˎ
반영됩니다.
4.ˎ표시창ˎ언어를ˎ선택합니다.
ˎ MENU를ˎ누릅니다.
ˎ 를ˎ누르고,ˎˎ또는ˎˎ버튼을ˎ눌러ˎ 을ˎ선택한ˎ다음ˎ
(재생/입력)을ˎ누르십시오.
ˎ ˎ또는ˎˎ버튼을ˎ눌러ˎ"Language"를ˎ선택한ˎ다음ˎ
(재생/입력)을ˎ누르십시오.
ˎ ˎ또는ˎˎ버튼을ˎ눌러ˎ디스플레이창에ˎ표시할ˎ언어를ˎ선택한ˎ
다음ˎˎ(재생/입력)을ˎ누르십시오.
다음ˎ언어를ˎ선택할ˎ수ˎ있습니다:ˎ
Deutsch(독일어),ˎEnglish
*
(영어),ˎEspa
ñ
ol(스페인어),ˎ
Fran
ç
ais(프랑스어),ˎItaliano(이탈리아어),ˎ
Русский
(러시아어),ˎ
,ˎ (중국어),ˎ (중국어),ˎ (태국어)
*
ˎ기본값ˎ설정
STOP을ˎ누르십시오.
5.ˎ녹음합니다.
ˎ¼ ICˎ레코더를ˎ사용하기ˎ전에ˎ스위치의ˎ돌출부가ˎ"
•
"ˎ마크에ˎ오도록ˎ
POWERˎON/OFF
•
HOLDˎ스위치를ˎ중앙으로ˎ밀어서ˎHOLDˎ상태가ˎ
해제되었는지ˎ확인하십시오.
ˎ 내장ˎ마이크로폰이ˎ녹음할ˎ음원ˎ쪽을ˎ향하도록ˎICˎ레코더를ˎ
놓습니다.
ˎ REC/PAUSE를ˎ누르십시오.
녹음이ˎ시작되고ˎ녹음램프()가ˎ적색으로ˎ켜집니다.
ˎ¼ ˎREC/PAUSE를ˎ누르면ˎ녹음을ˎ일시정지할ˎ수ˎ있습니다.ˎˎREC/
PAUSE를ˎ다시ˎ한ˎ번ˎ누르면ˎ녹음이ˎ재시작됩니다.
ˎ 녹음을ˎ정지하려면ˎSTOP(-A)을ˎ누르십시오.
액세스ˎ램프(-B)가ˎ주황색으로ˎ깜빡이고ˎ녹음이ˎ정지됩니다.
6.ˎ녹음ˎ내용을ˎ듣습니다.
(재생/입력)을ˎ누르십시오.
재생이ˎ시작됩니다.
ˎ VOLˎ-/+를ˎ눌러서ˎ볼륨을ˎ조절합니다.
ˎˎSTOP을ˎ눌러서ˎ재생을ˎ정지합니다.
7.ˎ삭제합니다.
일단ˎ소거한ˎ파일은ˎ복원할ˎ수ˎ없습니다.
ˎ ERASE를ˎ누르십시오.
"Erase?"가ˎ표시되고ˎ확인을ˎ위해ˎ삭제할ˎ파일이ˎ나타납니다.
ˎ ˎ또는ˎˎ버튼을ˎ눌러ˎ"Execute"를ˎ선택한ˎ다음ˎ(재생/
입력)을ˎ누르십시오.
선택된ˎ파일이ˎ삭제되는ˎ동안ˎ"Erasing…"ˎ애니메이션이ˎ
나타납니다.
추가ˎ기능
녹음,ˎ되감기,ˎ편집에ˎ관한ˎ추가ˎ기능ˎ세부ˎ사항이ˎ도움말ˎ설명서에ˎ나타나ˎ있습니다.ˎ
ˎˎ 장면ˎ선택
ˎˎ 추가/덮어쓰기/사전녹음
ˎˎ 노이즈ˎ컷
ˎˎ TRACKˎMARK(트랙ˎ마크)
ˎˎ DPC(DigitalˎPitchˎControl)
ˎˎ A-Bˎ구간반복
ˎˎ VOR(VoiceˎOperatedˎRecording)
ˎˎ 음향ˎ효과
ˎˎ EasyˎSearch
ˎˎ 분류
ˎˎ SoundˎOrganizerˎ편집ˎ소프트웨어
참고ˎ사항
국가나ˎ지역에ˎ따라ˎ일부ˎ옵션ˎ액세서리ˎ사용이ˎ불가능할ˎ수ˎ있습니다.
KR
GB
  • Page 1 1
  • Page 2 2

Sony ICD-SX734 Quick start guide

ICD-SX734
Sony
Brand
Sony
Model
ICD-SX734
Category
Dictaphones
Type
Quick start guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents