Pyle PLCMH5 Owner's manual

Quick Setup Guide

Wireless Backup Rearview Trailer Hitch Camera

Model: PLCMH5

1. Ensure the Camera and Monitor system are fully charged before use.

Charging time approx. 4 hours. The system comes with a cigarette lighter/outlet accessory

charging cable with two different connector jacks, to charge the camera and monitor

independently. Also included is a wall power adapter for charging at home.

*Optional: Use the included power cable to 'hard-wire' the Monitor receiver in your vehicle

2. The Monitor and Camera systems can be powered ON and OFF when necessary.

Each unit features a convenient power button.

Conserve battery life and only use the system when necessary.

Be sure to remove the camera from the rear of the vehicle when driving (when using the suction cup mount).

3. Send video from the camera to the monitor wirelessly, thanks to built-in 2.4Ghz transmitter and receiver.

Mount the Monitor to your windshield, mount the camera system in the rear of your vehicle.

The camera is angle adjustable and must have the nut on the underside tightened for optimal positioning.

The camera magnet mount attaches to the included suction cup metal base plate.

Use the waterproof cover on the camera for inclement weather.

www.PyleAudio.com