ADE EP2410 User manual

Page is loading ...

9

D E C L A R A T I O N O F C O N F O R M I T Y

The BALZANO Srl manufacturing company

with offices at Rondissone (TO) - ITALY - Strada della Mandria

declares that the espresso coffee machines

described in this manual:

• Mod. “EP 2400 Espresso Point Cappuccinatore” code M50010

Power supply 230V 50 Hz

• Mod. “EP 2410 Espresso Point Cappuccinatore” code M51010

Power supply 120V 60 Hz

Year of Manufacture 2001

They conform to the following standards documents:

CEI EN 60335-2-15/1997 and therefore to the basic requirements of Low

Voltages Directive 73/23 EEC and subsequent modification 93/68 EEC;

EN 55014-1/1993

(with A1:97 and A2:99), EN 61000-3-2/1995 (with A1:98 and A2:98),

EN 61000-3-3/1995, EN 55014-2/1997, EN 61000-4-3/1995,

EN 61000-4-4/1995, EN 61000-4-5/1995, EN 6100-4-6/1996,

EN 61000-4-11/1994 and therefore to the basic requirements of Electromagnetic

Compatibility Directive 89/336 EEC and subsequent modification 92/31 EEC

and to the basic requirements of Machine Directive 98/37 EEC.

GB

Responsible Company Officer

Alberto Fantinato

(general manager)

10

“Cappuccinatore” is a water heater fitted with an emptying out reservoir which delivers

a timed quantity of steam through an extraction nozzle.

TECHNICAL SPECIFICATIONS

Voltage: 230V 50 Hz (cod. M50010) Overall dimensions 31 x 35 x 28 cm

120V 60 Hz (cod. M51010) Weight approx 8Kg (17.6 lb)

Total power output: 1250 W Tank capacity approx 1500 cc (0,4 gal)

The weighted equivalent continuous sound pressure (A) is less than 70 dBA

(89/392/CEE Att. 1 ch. 1.7.4F).

IMPORTANT SAFETY INFORMATION

Do not operate the machine or carry out ordinary maintenance before reading and

understanding the instructions contained in this manual.

The steam delivered by the extractable nozzle is very hot. Do not expose yourself to

the steam jet directly, an incorrect use of the machine may be dangerous.

Do not let children use the machine.

Do not touch the hot surfaces.

Keep the enclosed instructions.

Improper machine use during operation, cleaning or maintenance can cause damage.

Before connecting the machine to the mains, make sure the following conditions are

complied with:

1) Flat, stable horizontal support surface.

To work properly the “Cappuccinatore” machine needs to be positioned on a

sufficiently stable horizontal surface to avoid it tipping up or falling accidentally.

2) Good air circulation.

The “Cappuccinatore” machine gets hot so it must therefore be positioned in a quite

large environment to avoid overheating.

Do not put the machine near electric or gas radiators or inside hot ovens.



CAUTION

Carefully read all the instructions in this manual before using the machine.

GB

11

3) Suitable Fittings.

The machine “Cappuccinatore” can be connected to a coin box or to an

“Espresso Point” machine predisposed (separately one from the other or

simultaneously); use only appliances suggested by the manufacturing company.

The “Cappuccinatore” machine is designed to function at:

230V 50 Hz (Code M50010) and at 120V 60 Hz (Code M51010)

NEVER insert the machine’s power plug into a socket with a different voltage.

The socket used must be earthed.

Please check the feeder: it must be placed properly on the support surface of the machine

and it mustn’t be put on hot surfaces.

Only components that operate at mains voltage are fitted to the machine. For this reason

NEVER remove the machine’s outer casing or carry out repairs.

Don’t use the machine with a damaged feeder or when the machine doesn’t work

properly. Arrange for repairing the machine before using it again.

Repairs must ONLY be performed by qualified personnel/engineers.

Don’t use the machine outside.

INSTALLATION

Position the machine on a flat, horizontal surface.

Remove the access lid on the right of the tank using the key supplied (Figure 1); release

the central lid (Figure 2), remove the tank (Figure 3) and fill it with drinking water

(preferably with a low lime content).

Fig. 1

Fig. 2

Fig. 3

GB

12

Power the machine by connecting its lead with the electrical outlet (Figure 4).

Move the switch on the back of the machine to position “I” (Figure 5).

The following LEDs will light up on the front panel (Figure 6):

Lighted red line “presence of tension”

It shows that the machine is under tension.

Flashing orange “Temperature control LED”.

It shows the intervention of the thermostat. It is flashing when the boiler hasn’t

reached the right temperature. It is on and fixed when the boiler has reached

the right temperature.

Flashing green “Water Supply Level LED”

It shows the level supply of water in the tank. If the tank is full the LED will be on.

On the contrary if the level of water is too low, the LED will start flashing.

Fig. 4

Fig. 5

Fig. 6



CAUTION

Remember to connect, first, the feeder to the machine, then the feeeder must

be placed into the wall socket, then you turn it on. To move the machine,

you have to turn the switch to the position ‘0’, after you have to disconnect

the wall socket and finally you have to separate the feeder from the machine.

Led green

Led orange

Red line

GB

13

The “Cappuccinatore” machine can be fitted with a coin box.

It can also be interlocked to an “Espresso Point” machine.



CAUTION

An insufficient quantity of milk for a prolonged time of vaporization may cause

the boiling of the liquid and the consequent overspilling from the container.

During the hot water or vapour supply it is advisable not to go beyond

the time limit of a minute and thirty seconds.

USE OF THE MACHINE

On the upper part of the front panel there are three dosage buttons signalled by built-in

green lights which are usually on and a STOP button, signalled by a red light which is

usually off.

Small amount (steam delivery which lasts thirty seconds).

Advisable for not more than 70 cc of milk.

Medium amount (steam delivery which lasts 60 seconds)

Advisable for 130 cc of milk, not more.

Free amount (steam delivery which lasts 2 minutes).

GB

ARRANGEMENT OF LIME FILTER

The “Espresso Point” machine could be equipped with an engagement lime filter.

If it is present, proceed like it follows:

Main information for safety

Insert the reserve tank and/or lime filter with the machine turned off and disconnected

from the power supply.

Activation

1) Open the bag containing the lime filter.

2) Place the filter in water and keep it there for at least twenty minutes.

Warning

The anti limestone filter catches all the calcium ions in the water, so that its efficacy is

limited in time and strongly affected by the hardness of water to be used. Replace the

filter after 600-800 uses.

14

Machine with coin box

With this machine, it is necessary to insert some coins to make the steam delivery work.

The green LEDs used to select the amounts, are normally off.

• Insert the money in the coin box and the amount LED buttons will light up.

• Select the amount you want after having removed the delivery device and placed

the cup. The selected button lights up, the others will be off. The red stop button will

light up and the delivery starts immediately.

• Follow the instructions of the previous pharagraph.

The machine can be used only at one price.

If it is connected with an “Espresso Point” machine, the instructions of operating will

depend on the features of the appliance you use, in this case follow the instructions

written on the attached handbook.



CAUTION

Do not expose yourself to the steam jet delivered by the steam device. Avoid

touching the delivery device. There may be danger of burning yourself.

GB

Machine without coin box

Turn round the steam delivery device towards the external,

holding the red lever and pulling it towards oneself (Figure 7).

Dip the steam delivery device inside the cup filled up with

the amount of milk you want. To start the delivery select the

chosen amount pushing gently the corresponding button.

The selected button will light up immediately, conversely the

green LEDs of the other non-selected buttons will be off.

The STOP button, which was off before, will light up now.

If a predetermined amount has been selected, the machine

will deliver the steam and it will stop automatically. It is anyway possible to stop the

delivery in advance, just pushing the STOP button.

If the free amount has been selected, the machine will deliver steam according to the

user’s needs. When the amount of foam you want has been reached, you can push the

STOP button to stop the machine. An automatic timer interrupts anyway the delivery

after two minutes.

If the “Cappuccinatore” machine is connected with an “Espresso Point” machine it can

be used according to the checks written on the appliance chosen:

please follow the instructions given in the corresponding handbook.

The “Cappuccinatore” machine, as steam delivery device, can also be used to heat any

kind of drinks.

Fig. 7

15

CLEANING

To clean the steam delivery device, take off the external tube (figure 8) and unscrewing

the superior ring nut (Figure 9) take out the internal nozzle.

Wash in tepid water the three spare parts (Figure 10).

Clean the outer parts of the machine using a damp cloth only.

UNDER NO CIRCUMSTANCES use abrasive materials.

If necessary, the tank could be washed in the dishwasher.

Keys to the lid have to be handed to the cleaning and maintenance personnel.

Unplug the machine when cleaning it.

Do not immerse the device in water

to clean it, even partially.



CAUTION

Fig. 8

Fig. 9

Fig. 10

An automatic timer always interrupts the delivery after two minutes.

Whenever there is an interruption to electric power supply, the machine, when the tension

is back, will be completely back to the zero point. For the delivery you have to insert

again a token and select the amount. The flashing LED “Water level” signals that the water

is missing in the tank. If the machine is delivering a drink, the delivery will be completed

but no more drinks are delivered and the coin box will refuse any more tokens, until the

machine is put back to the ordinary conditions of operating.

GB

Page is loading ...

ADE EP2410 User manual

This manual is also suitable for

ADE EP2410 User manual

in other languages

Other documents