Moen L4621 Series User manual

Type
User manual

This manual is also suitable for

Moen L4621 Series faucet boasts a durable metal construction with various finishes to complement your bathroom décor. This WaterSense-certified faucet conserves water without compromising on performance, delivering a maximum flow rate of 1.5 gallons per minute. Its 1225 cartridge design ensures smooth, precise temperature control and can accommodate reversed piping for versatile installation options. The faucet meets ADA standards for lever handles, making it accessible for individuals with disabilities.

Moen L4621 Series faucet boasts a durable metal construction with various finishes to complement your bathroom décor. This WaterSense-certified faucet conserves water without compromising on performance, delivering a maximum flow rate of 1.5 gallons per minute. Its 1225 cartridge design ensures smooth, precise temperature control and can accommodate reversed piping for versatile installation options. The faucet meets ADA standards for lever handles, making it accessible for individuals with disabilities.

Specifications
CRITICAL DIMENSIONS
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
SPACER
PROVIDED –
DISCARD IF
MOUNTING
SURFACE IS
MORE THAN
3/4" THICK
1-3/4"
(45mm)
MAX.
2"
(25mm)
1/2" IPS
ADAPTER
2"
(25mm)
DECK PLATE
Lift
Rod
TOP OF
MOUNTING
SURFACE
2"
(51mm)
ESC.
WIDTH
6-1/8" (156mm)
ESCUTCHEON WIDTH
2"
(51mm)
4-3/8"
(111mm)
6-5/8" (168mm)
OPEN POSITION
CHATEA
Single-Handle Lavatory Faucet
with Metal Waste Assembly
Models: L4621 series
Bulk Pack Models (12 Per Carton): L64620 series
with 50/50 Waste Assembly
Bulk Pack Model (12 Per Carton): L64621 series
Less Waste
Model: L4601 series
Bulk Pack Model (12 Per Carton):
L64601series
DESCRIPTION
Metal construction with various finishes identified by suffix
1/2" IPS connections
OPERATION
Pivot action lever style handle
Temperature controlled through 180˚ degree arc of handle travel
FLOW
Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi,
for products made before October 2008 flow is limited to
2.2 gpm max (8.3 L/min)
CARTRIDGE
1225 cartridge design
Nonmetallic/nonferrous and stainless steel material
Can accommodate reversed piping and back to back installations
STANDARDS
Third party certified to WaterSense,® CSA B125.1, ASME A112.18.1,
ICC A117.1, and all applicable requirements referenced therein
Certified to ANSI/NSF 61/9
Complies with California Proposition 65 and with
the Federal Safe Drinking Water Act
•ADA for lever handle
WARRANTY
Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
5 year warranty if used in commercial installations
Rev 6/08
NOTE: THIS FAUCET IS DESIGNED TO BE
INSTALLED THRU 3-1" DIA. HOLES, 2" ON CENTER
There is more than 1 version of this model.
Page down to identify the version you have.
FOR MORE INFORMATION: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
SPACER PROVIDED –
DISCARD IF MOUNTING
SURFACE IS MORE THAN
3/4" (19mm) THICK
1-3/4" (45mm)
MAX.
1/2" IPS
Adapter
3-5/8"
(92mm)
6" (152mm) OPEN
POSITION
1-3/4"
(45mm)
DECK PLATE
TOP OF
MOUNTING
SURFACE
2"
(51mm)
ESC.
WIDTH
6" (152mm)
ESCUTCHEON WIDTH
LIFT
ROD
2"
(51mm)
2"
(51mm)
Rev 6/08
DISCONTINUED
STYLE
CHATEA
Single-Handle Lavatory Faucet
with Metal Waste Assembly
Models: L4621 series
Bulk Pack Models (12 Per Carton): L64620 series
with 50/50 Waste Assembly
Bulk Pack Models (12 Per Carton): L64621 series
Less Waste
Models: L4600 series, L4601 series
Bulk Pack Models (12 Per Carton):
L64601 series
NOTE:
THIS FAUCET IS DESIGNED TO BE
INSTALLED THRU 3-1" DIA. HOLES, 2" ON CENTER
DESCRIPTION
Metal construction with various finishes identified by suffix
1/2" IPS connections
OPERATION
Pivot action lever style handle
Temperature controlled through 180˚ degree arc of handle travel
FLOW
Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi,
for products made before October 2008 flow is limited to
2.2 gpm max (8.3 L/min)
CARTRIDGE
1225 cartridge design
Nonmetallic/nonferrous and stainless steel material
Can accommodate reversed piping and back to back installations
STANDARDS
Third party certified to WaterSense,® CSA B125.1, ASME A112.18.1,
ICC A117.1, and all applicable requirements referenced therein
Certified to ANSI/NSF 61/9
Complies with California Proposition 65 and with
the Federal Safe Drinking Water Act
•ADA for lever handle
WARRANTY
Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
5 year warranty if used in commercial installations
  • Page 1 1
  • Page 2 2

Moen L4621 Series User manual

Type
User manual
This manual is also suitable for

Moen L4621 Series faucet boasts a durable metal construction with various finishes to complement your bathroom décor. This WaterSense-certified faucet conserves water without compromising on performance, delivering a maximum flow rate of 1.5 gallons per minute. Its 1225 cartridge design ensures smooth, precise temperature control and can accommodate reversed piping for versatile installation options. The faucet meets ADA standards for lever handles, making it accessible for individuals with disabilities.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI