Anthro MiniCart User manual

Brand: Anthro

Model: MiniCart

Category: Computer desks

Type: User manual

Anthro MiniCart is a versatile and customizable mobile storage solution designed to meet your specific needs. With its sturdy construction and adjustable shelves, it's perfect for organizing and transporting equipment, supplies, and more. The MiniCart features a durable steel frame, four locking casters for easy mobility, and a variety of shelf options to accommodate items of different sizes and shapes. Whether you're using it in a workshop, office, or classroom, the MiniCart is a great choice for keeping your belongings organized and within reach.

TECHNOLOGY FURNITURE

300-5385-00

*300-5385-00*

Anthro MiniCart

Assembly Instructions

01– Insert Screws ............................ Qty. 4................. 325-5052-00

02– 2

" Non-Locking Casters ........ Qty. 2 ............... 150-5002-03*

03– Caster Inserts ........................... Qty. 4 ............... 525-1000-00*

04– 2

" Locking Casters ................ Qty. 2...............150-5003-03*

05– 1.75" Large End Caps ............ Qty. 2..................175-5021-xx

06– Base Tube Screws ..................... Qty. 3................. 325-5000-00

07– MiniCart Base Tube ..................... Qty. 1 .................. 125-5004-xx

08– Support Screws ........................ Qty. 6 ................. 325-5010-00

09– Vertical Legs .............................. Qty. 3..................125-5020-xx

10– Clamp Screws........................... Qty. 6 ................. 325-5086-00

11– Shelf Supports .......................... Qty. 6 .................. 175-5060-xx

12– Shelf Clamps ............................. Qty. 6 ..................175-5059-xx

Enclosed Parts List

Detailed views of all Hardware is provided with each Assembly Step

13– MiniCart Shelves ...................... Qty. 2 ..................100-6003-xx

14– 1.5" Small End Caps ............... Qty. 3 ..................175-5020-xx

All Fastener quantities listed here are the minimum needed

for your Cart assembly. There may be a few extra

Fasteners included, which are not counted in the Parts List.

To make the assembly of your Anthro MiniCart even easier, we have included

all of the required tools (not shown above). The handy Hex Driver Bit can be

used in your electric drill in place of the Hex Driver.

Hex Driver

" ........................ Qty. 1 ................. 375-5000-00

Hex Driver Bit

" .................. Qty. 1 .................375-5003-00

8 oz. Rubber Mallet .................. Qty. 1 ................. 375-5022-00

Anthro

Corporation Technology Furniture

10450 SW Manhasset Drive Tualatin, Oregon 97062

SAVE THESE INSTRUCTIONS!

Document # 300-5068-00

Step 7

Install all four Caster Inserts into the Base Tube and

secure (fully tighten) with one Insert Screw per Insert.

Next, push the Casters, (locking ones in front) into the

Caster Inserts.

Step 8

Carefully rotate the Shelf Assembly (from Step 6),

upside down as shown.

Place the Base Tube Assembly (from Step 7) onto the

Vertical Legs of the Shelf Assembly.

Attach the Base Tube to each Leg using a total of three

Base Tube Screws.

Tighten all Support and Base Tube Screws.

Step 9

Rotate your MiniCart over onto the Casters.

Pop the three 1.5" Small End Caps into the Vertical Legs

and the two 1.75" Large End Caps into the Base Tube.

Congratulations! Your MiniCart assembly is complete.

Please return the enclosed Registration Card to receive

our product updates, new catalogs, and sale flyers.

Thank you for choosing Anthro!

March 2006

These Assembly Instructions are

for the GT23xx.

Before beginning assembly of your

Anthro MiniCart, please take a moment

to review the parts listed below to verify

that your shipment is complete.

✔Does your Cart have 4" Casters?*

(Such as a GT23xx4. Your Caster Part

Numbers are given here.)

✔Does your Cart have Glides?*

(Such as a GT23xxGL. Your Glide and Glide

Insert Part Numbers are given here.)

4" Locking Caster

150-5011-03

4" Non-Locking Caster

150-5010-03

Glide Insert

525-1004-00

Glide

325-5042-00

Questions? 1-800-325-3841

Insert Screw

(small pink patch on end)

325-5052-00

Base Tube Screw

325-5000-00

GLIDES ONLY

Thread each Glide

into the Glide Inserts

1.5" Small End Cap

1.75" Large End Cap

Locking Casters

Anthro MiniCart

Assembly Instructions

Anthro

Corporation Technology Furniture

10450 SW Manhasset Drive Tualatin, Oregon 97062

Step 1

Before proceeding, please review the Assembly

Instructions of all Anthro Products you purchased

and are planning to include in this installation.

Step 3

Attach three Shelf Supports to each Shelf.

Begin by first installing a Shelf Clamp into the Shelf

notch. Be sure the pointed barbs face towards the

outer Shelf edge.

Next, slide a Shelf Support into the recesses of the

Shelf Clamp and Shelf. Push in as far as possible.

Finally, secure with a Clamp Screw.

anthro.com

Step 4

Loosely attach one Shelf to Hole 11 from the bottom (coped

end) of one Vertical Leg using a Support Screw.

NOTE: This will place your lower Shelf 19" from the floor using

the standard 2

" Casters.

Step 5

Loosely attach the remaining Shelf to Hole 2 from the

top (non-coped end) of the Vertical Leg Assembly (from

Step 4) using one Support Screw.

NOTE: Handle the Shelf Assembly carefully until the Cart

is fully assembled.

Step 6

Loosely attach the 2

and 3

Vertical Legs to the

Shelf Assembly (from Step 5) using one Support

Screw per Shelf Support.

TIP: Use the holes in the Vertical Legs as a ruler to

ensure that your Support Screws are installed into the

correct locations.

Questions? 1-800-325-3841

First

Finally

Support Screw

325-5010-00

Clamp Screw

325-5086-00

Barbs

Step 2

Decide on the Shelf locations for your MiniCart. You can

place your Shelves almost anywhere on the Vertical Legs

(the Legs are stamped at 1" increments).

For a Lower Shelf location that is higher or lower than

19" from the floor, refer to the illustrations shown at right

to determine which holes to attach your Lower Shelf.

Once your MiniCart is assembled, it is very

difficult to move a Shelf without taking the

entire Cart apart and starting over.

NOTE: These instructions will place your Lower Shelf

19" from the floor using the standard 2

" Castors.

GT23xx with 2

" Casters

GT23xx4 with 4" Casters

GT23xxGL with Glides

Hole 12=20"

Hole 11=19" (measured from the coped end)

Hole 10=18"

Hole 11=20"

Hole 10=19"

Hole 9=18"

Hole 9=20"

Hole 8=19"

Hole 7=18"

REMINDER: You may want to

measure your equipment to

make sure it fits between the

selected Shelf locations.

Coped end

19"

Support Screw

325-5010-00

Support Screw

325-5010-00

GT23xx

Overall MiniCart height is

28" using 2

" Casters

NOTE: Add 1" to overall height for 4" Casters and

subtract 3" from overall height for Glides.

Bottom

(coped)

end

Hole 11=19"

(using 2

" Casters)

Insert one Support Screw

through each Shelf Support

To p

(non-coped)

end

Hole 2

Top

(non-coped)

end

Bottom

(coped)

end

NOTE: These Instructions

will create approximately

8" of usable space between

your Shelves.

Lower Shelf

Anthro MiniCart User manual

Brand: Anthro

Model: MiniCart

Category: Computer desks

Type: User manual

Download PDF

report

Anthro MiniCart User manual

Anthro MiniCart User manual

Related papers

Other documents