Commax DR-2GS Owner's manual

Category
Door intercom systems
Type
Owner's manual
Thank you for purchasing COMMAX products.
Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.
The company is not responsible for any safety accidents caused by abnormal operation of the product.
513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
Int’l Business Dept. Tel. : +82-31-7393-540~550 Fax. : +82-31-745-2133
Web site : www.commax.com
Thank you for purchasing COMMAX products.
Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.
The company is not responsible for any safety accidents caused by abnormal operation of the product.
User Manual
DR-2GS
513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
Int’l Business Dept. Tel. : +82-31-7393-540~550 Fax. : +82-31-745-21 33
Web site : www.commax.com
PM0770H00010
Printed In Korea / 2016.06.104
1
Thank you for choosing COMMAX.
Please read this manual carefully before you use the product.
Greetings
Table of contents
Greetings ···································································································1
Table of contents ·······················································································1
1. Warnings and caution ·············································································2
2. Overview·································································································4
3. Working Instruction ·················································································4
4. Connection wring diagram and Setting drawing ·····································5
5. Wiring diagram ·······················································································6
6. Components ···························································································7
7. Specication ···························································································7
2
Please follow the things described below in order to prevent any
danger or property damage.
Warning
Caution
Prohibition.
No disassembly
No touch
Must follow strictly.
Shows plugging out the power cord
without an exception
Shows the warning and caution for an electric shock.
Shows the warning and caution for a fire.
It may cause a minor damage or injury if violated.
It may cause a serious damage or injury if
violated.
Power & Installation
Warning
Please dont use several
products at the same time on
one power socket.
·It may cause a fire due to an
abnormal overheating.
Please dont bend the power
cable excessively or it may
cause an electric shock.
·fire when using a damaged
power cable.
Please dont handle the power
cable with a wet hand.
·It may cause an electric
shock.
Please plug out the power
cable from the socket when
not using it for a long period
of time.
·It may shorten the product
lifespan or cause a fire.
Please dont install the
product in the place where
there is much oil, smoke or
humidity.
·It may cause an electric
shock or fire.
Please dont install the
product with the lightening
and thunder.
·It may cause an electric
shock or fire.
Please dont use and connect
this product with other
products with different rated
voltage
·It may cause a disorder or
fire.
When installing the product
that generates heat, please
install the product away from
the wall (10cm) for the
ventilation.
·It may cause a fire due to
the increased internal
temperature.
1. Warnings and caution
2
Please follow the things described below in order to prevent any
danger or property damage.
Warning
Caution
Prohibition.
No disassembly
No touch
Must follow strictly.
Shows plugging out the power cord
without an exception
Shows the warning and caution for an electric shock.
Shows the warning and caution for a fire.
It may cause a minor damage or injury if violated.
It may cause a serious damage or injury if
violated.
Power & Installation
Warning
Please dont use several
products at the same time on
one power socket.
·It may cause a fire due to an
abnormal overheating.
Please dont bend the power
cable excessively or it may
cause an electric shock.
·fire when using a damaged
power cable.
Please dont handle the power
cable with a wet hand.
·It may cause an electric
shock.
Please plug out the power
cable from the socket when
not using it for a long period
of time.
·It may shorten the product
lifespan or cause a fire.
Please dont install the
product in the place where
there is much oil, smoke or
humidity.
·It may cause an electric
shock or fire.
Please dont install the
product with the lightening
and thunder.
·It may cause an electric
shock or fire.
Please dont use and connect
this product with other
products with different rated
voltage
·It may cause a disorder or
fire.
When installing the product
that generates heat, please
install the product away from
the wall (10cm) for the
ventilation.
·It may cause a fire due to
the increased internal
temperature.
1. Warnings and caution
3
Cleaning & Use
Please dont disassemble,
repair or rebuild this product
arbitrarily (please contact the
service center if a repair is
needed.
·It may cause an electric
shock or fire.
Please plug the power cable
firmly into the inner end
·It may cause a fire.
Please hold the plug tightly
when unplugging the power
cable (a part of the copper
wire may be disconnected if
the grabbing is only made on
the cord when pulling out the
cable).
·It may cause an electric
shock or fire
When connecting the power
cables after cutting the cable,
please install the product with
power off
·It may cause an electric
shock or fire
When installing the product,
please fix it firmly while using
the wall-mounting unit and
screws.
·It may cause an injury from
the falling object.
Please be careful when using
an AC circuit breaker since
there is a possibility of an
electric shock.
When cleaning the product,
please rub it with a soft and
dry cloth after plugging out
the power cable. (Please dont
use any chemical products
such as wax, benzene, alcohol
or cleanser.)
Please dont drop the product
on the ground and dont apply
a shock .
·It may cause a failure.
Please use the designated
connection cable within the
maximum calling distance
designated for the product
·It may reduce the product
performance.
Please check the use voltage
and current for the DC-only
products and use the
appropriate rectifier.
·It may cause a fire.
Please avoid direct rays of the
sun or heating devices at a
time of installation.
·It may cause a fire.
Please dont install the
product on an unstable place
or small support board.
·It may cause an injury if it
falls down while in use.
If an abnormal sound, burning
smell or smoke is coming out
of the product, please plug out
the power cable and contact a
service center.
·It may cause an electric
shock or fire.
Please dont insert any
metallic or burnable materials
into the ventilation hole.
·It may cause an electric
shock or fire.
Please use only the designated
batteries for the products of
using DC power.
·It may cause an electric
shock or fire.
Cleaning & UsePower & Installation
Warning
Caution
2.
Overview
4
No. PART No. PART
1 Front Panel 6 Call Button
2 Front Panel Screw Hole 7 Door Open/Close Cable
3 Speaker 8 Connection 1 (from guard station, 4pins)
4 Status LED 9 Connection 2 (from guard station, 3pins)
5 C-MIC
3-1 What you should know
- DR-2GS is designated door phone only applicable for guard station of CDS-2AG, which has the
version of 3.2 or above
- Power source is from the guard station which uses DC 24V
3-2. Call to Guard station
When call button is on, calling to guard station with chime sound
Once guard station receives a call, voice communication will be started.
During the call, call pause can be requested from guard station.
- During call waiting, when Blue Led is on the Red Led blinks.
- Call waiting will be released within 3 minutes when there is no call in guard station.
When call from guard station call waiting mode will be finished. (Then, the door open operation
is executed in the guard station)
3.
Working Instruction
4 .Connection wring diagram and Setting
drawing
4 5
3-3. SECURITY OFFICE DEVICE (CDS-2AG) Manual
You can call household unit when you press SP.P
HONE (Speaker phone) button after you call from
DR-2GS to guard station.
- At this time, led of SELECT 4 switch is turned on and DR-2GS that is called is stored.
- However, if another number is already stored in SELECT 4, DR-2GS that is called newly is stored
Press building/household unit number and call.
When you finish the calling a household unit please, take down the receiver (HOOK ON)
then, pick up the receiver (HOOK OFF) and press 'SELECT 4'. Finally, you will see the number
that is called to DR-2GS.
When you press paging button (#) calling and door opening will be activated.
3-4. ID Setting
- Up to 3 units can be added. The setting can be made in a guard station.
- If ID is duplicated, it may not operate properly.
Call the guard station.
After you pick up the receiver, and then press the remote control button.
0101 -> Building (*) button -> 99XX (Input ID in XX sections) -> Paging (#) button
If there is other extension, proceed in the same way.
6
5. Wiring diagram
* Warning
- When wiring please, connect as below.
(Figure 1)
(Figure 2)
6 7
6. Components
7. Specification
Model
DR-2GS
Power Source DC 24V (From the guard-station)
Power
Consumption
Max. 100mA
Comm. Method Simultaneous Communication Method
Operating Temp.
-10(tested up to -40) ~ +50
Dimension (mm) 87.5(W)×120(H)×21(D)
Distance
Max. 50 meters
(Φ 0.5 UTP basis, Expand max 3 units within 50 meters)
UTP Cat 5e. basis. Circuit Resistance less than 10ohms per 100M
Printed In Korea / 2019
.01.104
513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
Int’l Business Dept. Tel. : +82-31-7393-540~550 Fax. : +82-31-745-2133
Web site : www.commax.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

Commax DR-2GS Owner's manual

Category
Door intercom systems
Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI