Memory Viewer
Slide Converter
This is the manual for the Memory Viewer function.
Read this manual thoroughly to operate the Memory Viewer
function.
First, read the owner's manual of the projector to understand
the basic operation of the projector and the safety
instructions.
The safety instructions in the owner's manuals should be
followed strictly.
English
FrançaisEspañolDeutsch
Italiano
Owner's Manual
USB Memory
MODEL WL-10
2
English
3
Introduction
Memory Viewer function
The Memory Viewer function is to make a presentation or project an image without using
computers or some other external equipment. You do not have to carry a computer or other
equipment to project.
Store presentation data or images on a dedicated USB memory and insert it into the USB
terminal of the projector, then you can project these images.
This projector is also equipped with dedicated Slide Converter software to edit the presentation
images to project with the Memory Viewer function. With this function, you can edit images,
photo data, or PowerPoint data into a more effective presentation data.
Which images can project with the Memory Viewer function?
With the Memory Viewer function, you can project images in these formats below.
•
Edited data with Slide Converter (Index data)
•
Bitmap data
•
JPEG data
*Some data may not be projected even with these format.
USB memory for the Memory Viewer function
Use the optionally available USB memory (Model : WL-10). If you use other product, the
projector may not work properly.
The USB memory is dedicated for our company's projectors. We cannot guarantee for using
with other projectors.
Back up the data
It is recommended that important data to edit with Slide Converter and store in USB memory is
to be stored in other media in advance. We will not hold any responsibility for data loss or
damage resulting from using the Memory Viewer function.
Trademarks
Microsoft, Windows, and PowerPoint are either registered trademarks or trademarks of Microsoft Corporation
in the United States and/or other countries. Each name of corporation or product in this Owner's manual is
either a registered trademark or a trademark of its respective corporation.
• The On-Screen Menu and figures in this manual may differ slightly from the product.
• The contents of this manual are subject to change without notice.
4
Index
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1. Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Installing the USB Memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2. Memory Viewer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
How to Use the Memory Viewer Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Edit Image Data for Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Rotation.........................................................................................................................10
Delete............................................................................................................................11
Reorder .........................................................................................................................12
Auto Play Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3. Slide Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
About Slide Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Installing Slide Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Operating Slide Converter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Import Image Files ........................................................................................................17
Edit Image files .............................................................................................................20
Save / Delete Data ........................................................................................................23
Other Functions ............................................................................................................25
Chapter
1. Preparation
1
Read this chapter before use.
5
English
6
1. Preparation
USBUSB
Installing the USB Memory
Install the optionally available USB memory to the USB terminal on the right side of the projector.
When installing, confirm the direction of the plug not to damage the terminal.
Use optionally available our USB memory (Model : WL-10). If you use other product, the
projector may not work properly.
The USB terminal is compatible with USB memory formatted with FAT16 or FAT32.
It is not compatible with other formats. Please note that when you format the USB memory
USB lamp*
USB memory*
Blink during access
USB terminal
* The lamp blinks during access
to the USB memory. While
the lamp is blinking, do not
pull out the USB memory. It
may cause data corruption in
the USB memory.
Caution on Installation and Removal of the USB Memory
Please note following points to install and remove the USB memory.
The USB memory will be blinking when it is installed to the projector or while the projector is
reading out the data. Do not remove the USB memory while it is blinking.
Do not install and remove the USB memory frequently. Remove the USB memory at least 5
seconds after installation. And install at least 5 seconds after removal. While installing or
removing the USB memory, the projector is in switching period for those operation.
Back up your important data
Back up your important USB memory data to the other media (Disk, memory, or tape.) We will
not hold any responsibility for the data loss or data corruption.
Caution on Handling and Storing the USB Memory
- Do not put USB memory or its cap within close reach of children. Swallowing them may cause
suffocation. - If the smoke or questionable odor rise, turn off the peripheral equipment and contact your
dealer. - Do not put water, chemical or oil to the USB memory. It may cause short out or fire. - Do not
put foreign objects or put metal objects to the USB terminal. Static electricity may cause data loss or data
corruption. - Do not remove the USB memory from the computer or the projector while the USB memory
is reading out or writing the data. It may cause data loss or data corruption. - Do not store the USB
memory where high temperature, humid or dusty place or magnetized items are around.
Specifications of USB memory (Model : WL-10) *Opetionally available
Operating Voltage
Operating Temperature / Humidity
Dimension(Including the cap)
Compatible OS
DC5V
0-40˚C/0-85%
71.5(Length)/17(Width)/10(Height)mm
Windows XP/Windows2000 Professional
Windows Me
Interface / Capacity USB2.0/1.1 / 256MB
Chapter
2. Memory Viewer
2
7
English
8
2. Memory Viewer
How to Use the Memory Viewer Function
1. Select Input Source
The first image of the first index file stored in the USB memory is displayed on the screen.
Cautions in Projecting Images
The projector supports only JPEG, Bitmap and index data (.idx) which is edited with Slide
Converter. Other data formats are not compatible.
Use an optionally available USB memory. When using undesignated product, the projector may
not work properly.
When storing both the JPEG, Bitmap images and the index file which is edited with Slide
Converter on the same USB memory, JPEG/Bitmap data will not be projected.
2. Selecting an Index File in the Viewer Menu
Move the red framed pointer to "Index" and press the SELECT button. Thumbnail of the
index files will appear. Press the MENU button to hide the On-Screen Menu.
* Index file cannot be selected while the On-Screen Menu is displayed.
Select "Memory viewer"
from the Input Menu.
Viewer
Index
Page
Thumbnail of
index files
English
9
3. Select an Image to be displayed.
Press the Point buttons on the remote control or the top control of the projector to move the
blue framed pointer to the index file to be displayed and then press the SELECT button.
Images will be displayed following their configurations.
A file not set as Auto Play
Press the Point e button to project the next page and d to the previous page.
Press the SELECT button to display thumbnails of all the images in the index file. Press the
Point button to move the blue framed pointer to the image you wish to display and press the
SELECT button. Then the selected image will appear on a screen.
A file set as Auto Play
Images in the index file will be projected automatically one after another.
This Auto Play function can be paused by pressing the Point d button and restarted by the
Point e button. Press the SELECT button to display thumbnails of all the images in the
index file. Press the Point button to move the yellow framed pointer to an image and then
press the SELECT button. Auto Play will restart from the image.
Edit Image Data for Display
The projector has quick editing functions. You can edit images and project them with the
projector. The following editing functions are available with the projector.
Rotation ........................Rotate images to the specified direction
Delete ..........................Hide images you do not want to display
Reorder ........................Reorder images to be displayed.
Reset the Setting..........Cancel all the settings made with the projector.
Press the SELECT button to display
thumbnails of all the images in the
index file
Move the flame to an image and
press the SELECT button. Auto
Play will restart from the image.
Note: Selecting the Page icon displays thumbnail of all the images in the selected index file. Select an
image by pressing the Point 78buttons and press the SELECT button to start Auto Play from
the image.
2. Memory Viewer
10
2. Memory Viewer
q Move the red arrow pointer to "Rotation" and press the SELECT button.
w Move the red framed pointer to the image you wish to rotate.
e Press the SELECT button. Rotation menu will appear. Press the Point ed
buttons to select the direction to rotate the image. Then press the SELECT button
to execute the rotation. The image rotates by 90 degrees as you press the
SELECT button once.
r Select "Reset" to reset all the editing. Select Exit to close the menu.
1. Select an Index file you wish to project.
Select "Index" in the Viewer menu. Press the MENU button to hide the On-Screen Menu.
Select the index file to edit by pressing the Point 78buttons.
2. Display the Edit Menu
Select "Edit" from the Viewer menu and press the SELECT button. Sub-menu will appear.
Move the red arrow pointer to the item you wish to select and press the SELECT button.
Rotate 90 degrees
to the right.
Rotate 90 degrees
to the left.
Reset
Exit
Edit
Rotation Menu
Move the pointer to the item
you wish to select and press
the SELECT button.
Select the index file
to edit.
Rotation
Reset
Exit
Index
Viewer
English
11
q Move the red arrow pointer with the Point button to "Delete" and press the SELECT
button.
w Move the red framed pointer to the image you want to delete.
e Press the SELECT button. Confirmation dialog box will appear. Select "Yes" to
delete the image. X mark will be put over the deleted image.
Note: To cancel the delete action, select "Reset" in the Edit menu. In that case, all the other
editing operations will be canceled.
r Select "Reset" in the Edit menu to undo all the editing operations. Select "Exit" to
close the Edit menu.
Move the pointer to
"Delete" and press
the SELECT button.
Delete
2. Memory Viewer
Exit
Reset
12
2. Memory Viewer
q Move the red arrow pointer to "Reorder" and press the SELECT button.
w Move the red framed pointer to the image you wish to move.
e Press the SELECT button. A red bar appears at the left side of the selected
image. Move the red bar to the position where the image to be placed and press
the SELECT button. Confirmation dialog will appear and then select "Yes" to
move the image.
Note: To cancel the reorder action, select "Reset" in the Edit menu. In that case, all the other
editing operations will be canceled.
r Select "Reset" in the Edit menu to undo all the editing operations. Select "Exit" to
close the Edit menu.
3. Project the edited images
Press the MENU button to show the On-Screen Menu. Select "Index" with the Point button.
Then press the MENU button to hide the On-Screen Menu. Select the edited Index file and
press the SELECT button to project them.
About Edited Images
Editing operation here is to edit images to be temporarily displayed. The editing does not
affect the original data stored on the USB memory. The edited images cannot be saved if
you turn off or unplug the projector, or remove the USB memory from the projector.
Move the pointer to
"Reorder " and press
the SELECT button.
Move the red bar to the
position you wish to
move it and press the
SELECT button
Reorder
English
13
Auto Play Setting
Images in the Index file can be projected automatically. Select "Auto Play" in the projector menu
and set the interval time between the images.
Note: Interval time between images which is set in "Image Switch Timing Settings" (p22) is prior to
this Auto Play setting.
Auto Play
Move the pointer to "On"
and set the time with the
Point 7 8 buttons.
2. Memory Viewer
14
Chapter
3. Slide Converter
3
15
English
16
3. Slide Converter
About Slide Converter
Slide Converter is the software to edit and convert Bitmap, JPEG or PowerPoint files into image
data to be projected with Memory Viewer function. This software has various unique edit
functions to allow you to make effective presentations.
Operating Environment
This software requires the following computer environment.
Required Operation System Windows 98 / Me / NT4.0 / 2000 / XP
Requirements when using Over RAM 64MB main memory. (More memory will be required
Windows 98 / Me / NT4.0 / 2000 depending on applications running at the same time.)
Requirements when using Over RAM 128MB main memory. (More memory will be
Windows XP Home Edition / Professional
required depending on applications running at the same time.)
Recommended CPU Pentium III 300MHz or higher
HDD Disk Drive More than 100MB free space
Display Setting Supports the following resolutions. VGA (640 x 480)
SVGA(800 X 600), XGA (1024 X 768)
Number of colors : Either of 16 bit (65536 colors) or 24/32 bit
(16.77 million colors)
Memory Viewer supports FAT16 / FAT32
Use USB memory formatted by FAT16/FAT32. Memory Viewer does not support NTFS
formats.
English
17
Install Slide Converter on your computer.
The software (Slide Converter) is included in the CD ROM provided with the projector.
Refer to the Owner's Manual (Adittional Vol.) of the projector ➔ "2. Setup Procedures" ➔
"Installing the Software" ➔ step 3 to install the Slide converter.
Activate Slide Converter. The Edit window as shown below will appear.
Import, edit, and save image data by selecting items from the tool bar at the top of the window.
Import Image Files
- Import JPEG/BMP files
[Image] -> [Add Image file]
Import JPEG/Bitmap files stored in Hard Drive on your computer to the Edit screen of
Slide Converter.
Note: You can import image files to the Edit screen simply by drag and drop operation. You can
also move images on the Edit Screen by drag and drop .
Edit Screen
3. Slide Converter
Operating Slide Converter
Installing Slide Converter
18
3. Slide Converter
- Capture images on your computer screen
[Image] -> [Screen Capture]
Capture images on your computer screen and load it to the Edit screen of Slide
Converter. If you select "Screen Capture", the following dialog box will appear.
Parameter Description
Capture..................Capture whole viewing area of
the image on your computer
screen and imports it to the
Edit screen.
Set up.....................Set up Display Capture (Refer
to the chart below)
Exit ..................Close the Screen Capture
dialog box
Parameter Description
Size ....................................Select screen size of the image to be captured among the
following resolutions.
640x480 pixels, 800x600 pixels, and 1024x768 pixels or Desktop screen
size (No Expansion/reduction*)
Format ..............................Select file format of the image to be captured among the following
formats.
Windows Bitmap(*.bmp), JPEG File(*.jpg)(Default)
Palettes..............................Select number of colors of the image to be captured among those
described below if the file format is Windows Bitmap (*.bmp).
2 colors, 256 colors and full color(default)
Quality .................. ............Quality of the image to be captured is adjustable if the file format is
JPEG (*.jpg).
Capture Wait ....................Set time from "Screen Capture" to capture the computer screen
between 1 and 10 seconds.
Note: If display resolution of your computer is larger than 1024x768 pixels, the projector may
compress images to be projected and which may affect the projected image quality.
Screen Capture
English
19
- Import PowerPoint data
[Image] -> [Import PowerPoint File]
Convert PowerPoint data to JPEG or Bitmap image and import it to the Edit screen of
Slide Converter.
*The computer needs to be installed PowerPoint software.
Parameter Description
Output...................Import the image displayed
on the screen.
Output All..............Import all the images on the
PowerPoint File.
Next ......................Display the next image.
Back ......................Display the previous image.
Exit ........................Close the screen.
Configuration of outputting PowerPoint data
To make settings for PowerPoint data to be imported, select Output Settings from
Option menu.
Parameter Description
Size.......................Select screen size of the PowerPoint file to be imported among resolutions
described below;
640x480 pixels, 800x600 pixels or 1024x768 pixels (default)
Format ................Select file format of the PowerPoint file to be imported among the formats
shown below;
Windows Bitmap(*.bmp), JPEG File(*.jpg) (default)
Palettes................ Select number of colors of the image to be captured among those
described below if the file format is Windows Bitmap (*.bmp).
2 colors, 256 colors and full color(default)
Quality..................Quality of the image of the PowerPoint data to be imported is adjustable if
the file format is JPEG (*.jpg).
3. Slide Converter
20
3. Slide Converter
- Open or add existing Index files
[File] -> [Open Index]
Select "Open Index" from File menu to open stored index files on Slide Converter.
[File] -> [Add Index]
Select "Add Index" from File menu to add another index file to the opened index file.
Edit Image files
- Cut / Copy / Paste / Delete
Select an item from Edit menu.
Details for each item is as follows:
Parameter Description
Cut ........................ Cut the selected image.
Copy......................Copy the selected image.
Paste ....................Paste the copied or cut image on Slide Converter.
Delete....................Delete the selected image.
Select All ..............Select all the opened images.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/