2. Barco
  3. iQ G350

Barco iQ G350 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Barco iQ G350 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Barco service bulletin
Serial Number: InfoT634
Date: 12/12/2005
Product: Barco iQ Reality series
Priority code*: C
A.
”Must” modification, Barco will provide t he necessary components to per form this mo difica tion
at no charge.
B.
Improves the reliability of the product.
C.
Improves the general working conditions of the product.
D.
For information only.
1. FIRMWARE UPGRADE AND X-CUBE SWAP
1.1 Impact of the firmware version on X-Cube swap
Domain of application
This InfoT is only applicable for following iQR*** projectors :
• R9010150: iQR210
• R9010230: iQR210 Pro
• R9010140: iQR350
• R9010210: iQR350 Pro
• R9010160: iQR500
• R9010220: iQR500 Pro
• R9210145: R350 Fats
and for X-Cube kits R827847k with serial num ber R50021 or higher.
Description
When replacing an X-Cube with an X-Cube kit with serial number R50021 or higher,al-
ways insure th at the proje ctor has firmware version V2.10 (or higher) installed.
This means that before downloading the new X-Cube settings, check that the projector has
firmware V2.10 (or higher) running.
If this is not the case, first upg
rade the projector to V2.10 and then perform the X-Cube
settings download.
Running an old er firmware (<V2 .10 ) in combination with a new X-Cube
set (sn R50021 or higher) wi
ll not guarantee optimal image quality.
Barco nv Presentations
Noordlaan 5,
8520 Kuurne
www.barco.com
Page 1 of 2
Barco service bulletin
The serial num ber of th e delivered X-Cube kit is indicated in the lower
part of the lens hold er (as shown on the image).
Image 1-1
For more info on the X-Cube swap procedure see the iQ service manual.
InfoT:
InfoT634
Page 2 of 2
/