2. Geovision
  3. GV-PA901
GV-PA901

Geovision GV-PA901 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Geovision GV-PA901 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
January 25, 2019
1
GV-PA901 PoE Adapter
The GV-PA901 is a Power over Ethernet (PoE) adapter designed to provide power to the IP
device through a single Ethernet cable. Adopting the PoE adapter enables you to mount an
IP camera anywhere in a building where power outlets are not available.
Packing List
1. GV-PA901 PoE Adapter x 1
2. AC Power Adapter x 1
Connections
Two Ethernet cables are required for the connection.
1. Connect one end of the first Ethernet cable into the LAN 10 / 100 port on the GV-PA901,
and the other end to the LAN port on a Hub / Router.
2. Connect one end of the second Ethernet cable into the PoE 10 / 100 port on the GV-
PA901, and the other end to the IP camera.
3. Connect the GV-PA901 to power using the supplied power adapter.
January 25, 2019
2
Specifications
PoE Standard
High Power Over Ethernet (Max. 90 W)
PoE Output (10 / 100 Out)
DC 56V, 1.6A (Max. 90 W)
Ethernet Cable Length
Max. 100 m (328 ft) from GV-PA901 to IP device, Cat5e
cable
Power Input
AC 100V ~ 240V, 2A
Operation Temperature
-10°C ~ 50°C (14°F ~ 122°F)
Dimensions (L x W x H)
69 x 40 x 93 mm (2.7 x 1.57 x 3.66 in)
Weight
250 g (0.55 lb)
All specifications are subject to change without notice.
/