Gorilla Playsets Ships Wheel Operating instructions

(7.5mm x 80mm)

(8.5mm i.d. x 16mm o.d.)

Ship's Wheel Cap

4 x 4 board

12" Diameter x 2" Deep

(Not Included)

Ship's Wheel

Ship's Wheel Insert

Washer

Lag Screw

Please note: Ship's Wheel is intended for make-believe-play by children.

*FOR RESIDENTIAL USE ONLY*

*FOR CHILDREN AGES 3-11*

Minimum

Ship's Wheel (07-0006)

1: Place the Ship's Wheel Insert inside the Ship's Wheel.

2: Use the 7.5mm x 80mm lag screw and 8.5mm washer to fasten the Ship's Wheel to the

board. Do not over-tighten or the Ship's Wheel will not turn.

(Note: board must be at least 2" thick so that the lag screw does not penetrate the

other side.)

3: Place the Ship's Wheel Cap over the center of the Steering Wheel.

This manual is also suitable for

Download PDF