Allied Brass 402D-RP-UNL Installation guide

18.00

457

1.26

31.98

PULL ASSY

MOUNTING

SCREW (4X)

Step 1:

Determine your desired location for installation and make a mark for the location.Make 4 marks where mounting screws will

be placed as shown below. Drill hole at each of the marks.

Drill holes for the desired location.

Pull Mounting

Step 2:

Mount Pull to desired location through screws provided.

402D-RP

INSTALLATION INSTRUCTIONS

No portion of this document or any artwork contained herein should reproduced in any way without the written conset of ALLIED BRASS INC.