idh by St. Simons 12011-003 Installation guide

by St. Simons, Inc.

Quality Solid Brass Decorative Hardware & Bath Accessories

“The Special Finishes Specialist”



idhbrass.com

Installation Instructions

Premium Grade Solid Brass

Wide Square Roller Ball Catch

Item# 12011

Dimensions:

 Face: 1” x 2-1/8”

 Tube Diameter: 3/4”

 Tube Length: 1-1/2”

 Weight: 2-3/4 oz.

 Strike: 1-3/8” x 2-1/8”

Dimensions are for reference use only.

For exact dimensions, please measure actual part.

Installation Instructions:

1. Mark center of door edge at desired position.

Drill 3/4” hole for roller.

2. Trace around face plate and chisel shallow recess.

3. Drill pilot holes. Insert roller ball catch and secure with

provided fasteners.

4. Trace strike and indentation outline onto door frame.

Chisel 3/16” recess for indentation.

5. Mortise shallow recess for strike plate.

Drill pilot holes and secure strike plate.

6. Adjust ball height by threading roller in or out of face plate.

Catalog Section: K

Wide Square Roller Ball Catch

Item# 12011

Date: Rev 05/18