Klein Tools ET120 Installation guide

Brand: Klein Tools

Model: ET120

Category: Multimeters

Type: Installation guide

Test &

Measurement

Crafted for optimum durability,

reliability and functionality, our

line of test and measurement

equipment is engineered with the

user in mind. Designed for, and by

electricians, our electrical testers

provide the latest in innovative,

time-saving features that

professionals require.

Includes:

•

Carrying case

•

Test leads with CAT III/CAT IV safety

caps

•

Thermocouple with adapter

(temperature-measuring models only)

•

Batteries

•

CAT IV 600V, CAT III 1000V, Class 2, Double insulaton safety rating

•

Built to withstand a 6.6 ft. (2 m) drop

•

Meets requirements for use in basic and controlled electromagnetic

environments like residential, office and light-industrial locations

•

The CL600 is an auto-ranging TRMS digital clamp meter that

measures AC current via the clamp, and measures AC/DC voltage,

resistance, continuity, and tests diodes via test leads

•

The CL700 is an auto-ranging TRMS digital clamp meter that

measures AC current via the clamp, and measures AC/DC voltage,

resistance, continuity, frequency, capacitance, and tests diodes

via test leads, and temperature via a thermocouple probe. It

also features a Low Impedance (LoZ) mode for identifying and

eliminating ghost or stray voltages

•

The CL800 is an auto-ranging TRMS digital clamp meter that

measures AC/DC current via the clamp, and measures AC/DC

voltage, resistance, continuity, frequency, capacitance, and tests

diodes via test leads, and temperature via a thermocouple probe.

It also features a Low Impedance (LoZ) mode for identifying and

eliminating ghost or stray voltages

Features

CL600 CL700 CL800

Drop Protection

6.6 ft. (2 m) 6.6 ft. (2 m) 6.6 ft. (2 m)

Ingress Protection

IP40 IP40 IP40

Safety

CAT IV 600V

CAT III 1000V

CAT IV 600V

CAT III 1000V

CAT IV 600V

CAT III 1000V

AC Voltage (Volts)

1000V 1000V 1000V

DC Voltage (Volts)

1000V 1000V 1000V

AC Current (Amps)

600A 600A 600A

DC Current (Amps)

– –

600A

Ohms (Resistance)

60MΩ 60MΩ 60MΩ

AC Millivolts

– – –

DC Millivolts

True RMS

Audible Continuity

Backlight

Temperature

–

-14° – 1000°F

(-26° – 538°C)

-14° – 1000°F

(-26° – 538°C)

Low Impedance

–

Non-Contact

Voltage Testing

Auto Ranging

Range Hold

Data Hold

Diode Test

Capacitance Test

–

6000 µF 6000 µF

Frequency / Duty Cycle

–

1Hz – 500 KHz 1Hz – 500 KHz

Max / Min

Magnetic Mount

Available As

Accessory

Available As

Accessory

Available As

Accessory

Worklight

– –

Auto-Power Off

LCD Display Count

6000 6000 6000

True RMS

Measurement

Technology

Tough Digital Clamp Meters

SELECT:

Instructions

Packaging

www.kleintools.com

191

Specifications are subject to change.

See page 295 for additional information on warnings.

See warning section on page 193 for important safety information regarding clamp meters

Electrical Test & Measurement

AUTO

CL200

Includes:

•

Carrying case

•

Test leads with CAT III/CAT IV safety caps

•

Thermocouple (temperature-measuring

models only)

•

Batteries

•

CAT III 600V, Class 2, Double insulation safety rating

•

Backlit display for clear readings

•

Low battery indicator and easily accessible battery compartment

•

Meets requirements for use in basic and controlled

electromagnetic environments like residential, office and light-

industrial locations

•

Built to withstand a 3.3 ft. (1 m) drop

•

The CL110 is an auto-ranging digital clamp meter that measures

AC current via the clamp, and AC/DC voltage, resistance and

continuity via test leads

•

The CL210 is an auto-ranging digital clamp meter that

measures AC current via the clamp, AC/DC voltage,

resistance and continuity via test leads, and temperature

via a thermocouple probe

•

The CL312 is an automatically ranging true root mean square

(TRMS) digital clamp meter that measures AC current via the

clamp, AC/DC voltage, DC microamps, resistance, continuity,

frequency, capacitance, and tests diodes via test-leads, and

temperature via a thermocouple probe. Features include

Auto Range to improve efficiency and speed when making

measurements; Diode Test to troubleshoot malfunctioning

diodes; Max/Min to understand the variability from average

of an electrical property being measured, and DC Microamps

measurements when working with flame sensors

•

The CL330 is an auto-ranging True Root-Mean-Squared (TRMS)

digital clamp meter that measures AC current via the clamp,

AC/DC voltage, resistance, continuity, frequency, capacitance,

and tests diodes via test-leads, and temperature via a

thermocouple probe. It features a super bright high visibility

dual-line OLED display screen that optimizes viewability in dark

or bright environments and when viewed at indirect angles

Features

CL110 CL210 CL312 CL330

Drop Protection 3.3 ft. (1 m) 3.3 ft. (1 m) 3.3 ft. (1 m) 3.3 ft. (1 m)

Ingress Protection

– – – –

Safety

CAT III 600V CAT III 600V CAT III 600V CAT III 600V

AC Voltage (Volts)

600V 600V 600V 600V

DC Voltage (Volts)

600V 600V 600V 600V

AC Current (Amps)

400A 400A 400A 400A

DC Current (Amps)

– – – –

Ohms (Resistance)

20MΩ 20MΩ 40MΩ 40MΩ

AC Millivolts

– –

DC Millivolts

DC Microamps

– – –

True RMS

– –

Audible Continuity

Backlight

Temperature

–

-40° – 1832°F

(-40° – 1000°C)

-40° – 1832°F

(-40° – 1000°C)

-40° – 1832°F

(-40° – 1000°C)

Auto Ranging

Range Hold

Data Hold

Diode Test

– –

Capacitance Test

– –

4000 µF 4000 µF

Frequency / Duty Cycle

– –

10Hz – 1MHz 10Hz – 1MHz

Max / Min

MAX only MAX only

Magnetic Mount

– – – –

Worklight

– – – –

Auto-Power Off

LCD Display Count

2000 2000 4000

–

OLED Display Count

– – –

4000

Bar Graph

– – –

Digital Clamp Meters

NEW!

High-Visibility

Display

Specifications are subject to change.

See page 295 for additional information on warnings.

www.kleintools.com

192

See warning section on page 193 for important safety information regarding clamp meters

Electrical Test & Measurement

8ZX5

Clamp Meter Specifications

Electrical Maintenance & Test Kit

•

Cat. No. RT210 detects the most common wiring problems in standard and GFCI receptacles

including open ground, reverse polarity, open hot, open neutral, and hot/ground reversed

•

Cat. No. 69409 Line splitter 10x allows the measuring of current draw up to 15A without

splitting the load's power cord

•

Cat. No. CL110 has CAT III 600V, Class 2, Double insulation safety rating and features a

backlit display for clear readings

•

RT210 withstands a 6.6 ft. (2 m)

•

Includes a carrying case, test leads and batteries

CL110KIT

Cat. No. Set Contains Weight

CL110KIT 0.94 lb (0.43 kg)

Cat. No. Overall Length Overall Height Overall Width Batteries

CL110 8-45/64" (221.1 mm) 1-39/64" (40.9 mm) 3-1/64" (76.6 mm) 3 x AAA

RT210 1-5/8" (41.3 mm) 2-7/8" (73.0 mm) 1-7/8" (47.6 mm) —

69409 4.67" (118.61 mm) 4-43/64" (118.7 mm) 2-9/32" (57.9 mm) —

Cat. No. Batteries Jaw Size Standard Included Overall Length Overall Height Overall Width Weight

CL110 3 x AAA 1-1/8"

(28.6 mm)

CAT III 600V;

CE Certified

Carrying Case, 41" (1041.4 mm) Test Leads

and Batteries

8-45/64"

(221.1 mm)

1-39/64"

(40.9 mm)

3-1/64"

(76.6 mm)

0.63 lb

(0.29 kg)

CL210 3 x AAA 1-1/8"

(28.6 mm)

CAT III 600V;

CE Certified

Carrying Case, 41" (1041.4 mm) Test Leads,

Thermocouple with Adapter, and Batteries

8-45/64"

(221.1 mm)

1-39/64"

(40.9 mm)

3-1/64"

(76.6 mm)

0.63 lb

(0.29 kg)

CL312 3 x AAA 1-1/8"

(28.6 mm)

CAT III 600V;

CE Certified

Carrying Case, Test Leads,

Thermocouple, Batteries

8-45/64"

(221.1 mm)

1-39/64"

(40.9 mm)

3-1/64"

(76.6 mm)

0.63 lb

(0.3 kg)

CL330 3 x AAA 1-1/8"

(28.6 mm)

CATIII 600V, Class 2,

Double insulation

Pouch, 41" (1041.4 mm) Test Leads,

Thermocouple, and Batteries

8-21/32"

(219.9 mm)

1-39/64"

(40.9 mm)

3-1/64"

(76.6 mm)

0.90 lb

(0.41 kg)

CL600 2 x AAA 1-3/8"

(34.9 mm)

CAT IV 600V;

CE Certified

Carrying Case, 41" (1041.4 mm) Test Leads

and Batteries

9-3/32"

(231.0 mm)

1-35/64"

(39.3 mm)

3-13/16"

(96.8 mm)

0.74 lb

(0.33 kg)

CL700 2 x AAA 1-3/8"

(34.9 mm)

CAT IV 600V;

CE Certified

Carrying Case, Test Leads,

Thermocouple with Adapter, and Batteries

9-3/32"

(231.0 mm)

1-35/64"

(39.3 mm)

3-13/16"

(96.8 mm)

0.74 lb

(0.33 kg)

CL800 2 x AAA 1-3/8"

(34.9 mm)

CAT IV 600V;

CE Certified

Carrying Case, 41" (1041.4 mm) Test Leads,

Thermocouple with Adapter, and Batteries

9-3/32"

(231.0 mm)

1-35/64"

(39.3 mm)

3-13/16"

(96.8 mm)

0.78 lb

(0.35 kg)

WARNINGS:

To ensure safe operation and service of the tester, follow these instructions. Failure to observe these warnings can result in severe injury or death.

• Before each use, verify meter operation by measuring a known voltage or current.

• Never use the meter on a circuit with voltages that exceed the category based rating of this meter.

• Do not use the meter during electrical storms or in wet weather.

• Do not use the meter or test leads if they appear to be damaged.

• Ensure meter leads are fully seated, and keep fingers away from the metal probe contacts when making measurements.

• Do not open the meter to replace batteries while the probes are connected.

• Use caution when working with voltages above 60V DC, or 25V AC RMS. Such voltages pose a shock hazard.

• To avoid false readings that can lead to electrical shock, replace batteries if a low battery indicator appears.

• Unless measuring voltage or current, shut off and lock out power before measuring resistance or capacitance.

• Always adhere to local and national safety codes. Use individual protective equipment to prevent shock and arc blast injury where hazardous live conductors are exposed.

Clamp Meters

NEW!

See page 295 for additional information on warnings.

www.kleintools.com

193

Electrical Test & Measurement

AUTO

CL200

Differential Temperature

Clamp Meter

Includes:

•

Carrying case

•

Test leads with

CATIII/CAT IV safety caps

•

Two Type K thermocouples

•

3 x AAA Batteries

•

CL450 HVAC Clamp Meter is an automatically ranging true root mean

square (TRMS) digital clamp meter that measures differential temperature

via K-Type thermocouple probes; AC current and Inrush current via the

clamp; AC/DC voltage, DC Microamps, resistance, continuity, frequency,

capacitance, and test diodes via test leads.

2000A Digital

Clamp Meter

Includes:

•

Carrying Case

•

Instruction Manual

•

Straight Input Test Leads

•

2 x AAA Batteries

•

CL900 is an auto-ranging, true root mean square (TRMS) 2000A digital

clamp meter that measures AC/DC current via the clamp and measures

AC/DC voltage, resistance, continuity, frequency, duty cycle, capacitance,

and tests diodes via test leads. It features a Low Impedance (LoZ) mode

for identifying and eliminating ghost or stray voltages, and has a dedicated

mode for capturing Inrush Current.

Cat. No. Batteries Jaw Size Standard Included Overall Length Overall Height Overall Width Weight

CL450 3 x AAA 1-5/8"

(41.3 mm)

CATIV 600V:

CE Certified

Carry Case, Test Leads,

2 Type K Thermocouples, Batteries

10"

(250.0 mm)

1-9/16"

(39.7 mm)

3-3/4"

(95.3 mm)

13.6 oz

(386 g)

CL900 2 x AAA 2"

(50.4 mm)

CAT IV 600V,

CAT III 1000V

Carrying Case, Instruction Manual,

Straight Input Test Leads, Batteries

10-25/64"

(264.2 mm)

1-45/64"

(44.1 mm)

3.9"

(99.1 mm)

17.6oz

(499 g)

Features

CL450 CL900

Drop Protection

6.6 ft. (2 m) 6.6 ft. (2 m)

Ingress Protection

–

IP40

Safety

CAT IV 600V

CAT III 1000V

CAT IV 600V

CAT III 1000V

AC Voltage (Volts)

1000V 1000V

DC Voltage (Volts)

1000V 1000V

AC + DC Voltage

–

AC Current (Amps)

600A

DC Current (Amps)

–

Ohms (Resistance)

60MΩ 60MΩ

DC Millivolts

–

DC Microamps

True RMS

Non-Contact Voltage Testing

Low-Pass Filter

–

Low Impedance

Inrush Current

Audible Continuity

Backlight

Differential Temperature

-40° – 1832°F

(-40° – 1000°C)

–

Digital Temperature Calibration

–

Auto Ranging

Range Hold

Data Hold

Diode Test

Capacitance Test

Frequency / Duty Cycle

Max / Min

Relative Mode

–

Auto-Power Off

LCD Display Count

6000 6000

Specialty Clamp Meters

SELECT:

Instructions

Packaging

NEW!

Specifications are subject to change.

See page 295 for additional information on warnings.

www.kleintools.com

194

See warning section on page 193 for important safety information regarding clamp meters

Electrical Test & Measurement

Includes:

•

Carrying case

•

Test leads with CAT III/CAT IV safety caps

•

Alligator clips

•

Thermocouple with adapter

•

Batteries

•

Backlit LCD display screen

•

CAT IV 600V safety rating

•

Built to withstand a 6.6' (2 m) drop

•

For use in basic and controlled electromagnetic environments like

residential, office and light-industrial locations

•

Low battery indicator and easily accessible battery and fuse replacement

compartment

•

The MM600 is an auto-ranging digital multimeter that measures AC/DC

voltage, AC/DC current, and resistance. It also measures temperature,

capacitance, frequency, duty-cycle, tests diodes and continuity

•

The MM700 is an auto-ranging True Root-Mean-Squared (TRMS) digital

multimeter that measures AC/DC voltage, AC/DC current, and resistance.

It also measures temperature, capacitance, frequency, duty-cycle, and

tests diodes and continuity

Features

MM600 MM700

Drop Protection

6.6 ft. (2 m) 6.6 ft. (2 m)

Ingress Protection

IP42 IP42

Safety

CAT IV 600V

CAT III 1000V

CAT IV 600V

CAT III 1000V

AC Voltage (Volts)

1000V 1000V

DC Voltage (Volts)

1000V 1000V

AC Current (Amps)

10A 10A

DC Current (Amps)

10A 10A

Ohms (Resistance)

40MΩ 40MΩ

DC Millivolts

AC Milliamps

DC Milliamps

AC Microamps

DC Microamps

True RMS

–

Audible Continuity

Backlight

Temperature

0° – 1000°F

(-18° – 538°C)

0° – 1500°F

(-18° – 816°C)

Low Impedance

–

Auto Ranging

Range Hold

Data Hold

Diode Test

Capacitance Test

1000 μF 4000 μF

Frequency / Duty Cycle

1Hz – 500 KHz 1Hz – 500 KHz

Max / Min

Lead Warning

Bar Graph

–

Magnetic Mount

Available As

Accessory

Available As

Accessory

Auto-Power Off

Battery Test

– –

LCD Display Count

4000 4000

Tough Digital Multimeters

www.kleintools.com

195

See warning section on page 197 for important safety information regarding multimeters

Specifications are subject to change.

See page 295 for additional information on warnings.

Electrical Test & Measurement

AUTO

CL200

Includes:

•

Test leads with CAT III/CAT IV safety caps

•

Thermocouple with adapter (temperature-measuring models only)

•

Batteries

•

CAT III 600V safety rating

•

Built to withstand a 3.3 ft. (1 m) drop

•

For use in basic and controlled electromagnetic environments like

residential, business and light-industrial locations

•

Low battery indicator and easily accessible battery compartment

•

The MM300 is a manual-ranging digital multimeter that measures

AC/DC voltage, DC current, and resistance. It also tests diodes

and continuity, and has a battery test mode

•

The MM400 is an auto-ranging digital multimeter that measures

AC/DC voltage, AC/DC current, and resistance. It also measures

temperature, capacitance, frequency, duty-cycle, and tests diodes

and continuity

Features

MM300

Manual Ranging

MM400

Auto Ranging

Drop Protection

3.3 ft. (1 m) 3.3 ft. (1 m)

Ingress Protection

– –

Safety

CAT III 600V CAT III 600V

AC Voltage (Volts)

600V 600V

DC Voltage (Volts)

600V 600V

AC Current (Amps)

–

10A

DC Current (Amps)

10A 10A

Ohms (Resistance)

20MΩ 40MΩ

DC Millivolts

AC Milliamps

–

DC Milliamps

AC Microamps

–

DC Microamps

True RMS

– –

Audible Continuity

Backlight

–

Temperature

–

0° – 1000°F

(-18° – 538°C)

Low Impedance

– –

Auto Ranging

–

Range Hold

–

Data Hold

Diode Test

Capacitance Test

–

200 μF

Frequency / Duty Cycle

–

1Hz – 50 KHz

Max / Min

–

Lead Warning

– –

Bar Graph

– –

Magnetic Mount

Available As

Accessory

Available As

Accessory

Auto-Power Off

–

Battery Test

–

LCD Display Count

2000 4000

Digital Multimeters

www.kleintools.com

196

See warning section on page 197 for important safety information regarding multimeters

Specifications are subject to change.

See page 295 for additional information on warnings.

Electrical Test & Measurement

69192

8ZX5

Multimeter Specifications

Multimeter Replacement Fuses

69033

Cat. No. For Use With Fuse Type

69191 MM1000, MM1300, MM2000, MM2300, MM6000 F 11A/1000V

69192 MM1000, MM1300, MM2000, MM2300, MM6000 F 440mA/1000V

69193 MM100 Fuse Kit F10A/500V, F250mA/250V

69194 MM200 Fuse Kit F10A/500V, F400mA/250V

69031 MM300 5x20 200MA 600V

69032 MM300, MM400 6x32 10A 600V

69033 MM400 5x20 500MA 600V

69034 MM600, MM700 10x38 10A 1000V

69035 MM600, MM700 6x32 500MA 1000V

Electrical Test Kit

•

The MM300 multimeter was developed to withstand daily wear and tear on

the job site, and has a safey rating of CAT III 600V, Class 2, Double insulation

•

The NCVT-1 has a bright green LED to indicate the tester is working; it

changes to red and warning tones sound when voltage is detected

•

NCVT-1 has a digitally-controlled ON/OFF power button and auto power-off

feature to conserve and extend battery life

•

Receptacle tester detects wiring configurations and indicates correct wiring,

open ground, open hot, open neutral, hot/ground reversed; it does not

indicate quality of ground, multiple hot wires, or a combination of defects

•

Includes visual and audible continuity indicators up to 25Ω

•

Includes test leads and batteries

69149

Cat. No. Set Contains Weight

69149 0.94 lb

(0.43 kg)

Cat. No. Overall Length Overall Height Overall Width Batteries

MM300 6" (152.4 mm) 1-25/32" (45.2 mm) 3-1/6" (77.8 mm) 2 x AAA

NCVT-1 5-1/2" (139.7 mm) 1" (25.4 mm) 23/32"(18.3 mm) 2 x AAA

Receptical Tester 2-3/4" (69.9 mm) 1" (25.4 mm) 1-1/2" (38.1 mm) —

Cat. No. Batteries Standard Included Overall Length Overall Height Overall Width Weight

MM300 2 x AAA CAT III 600V Test Leads and Batteries 6" (152.4 mm) 1-25/32" (45.2 mm) 3-1/6" (77.8 mm) 0.51 lb (0.23 kg)

MM400 2 x AAA CAT III 600V Test Leads, Batteries and Thermocouple 6" (152.4 mm) 1-25/32" (45.2 mm) 3-1/6" (77.8 mm) 0.51 lb (0.23 kg)

MM600 2 x AAA CAT IV 600V Carrying Case, Test Leads, Thermocouple, and Batteries 7" (177.8 mm) 2-3/32" (53.2 mm) 3-35/64" (90.1 mm) 0.90 lb (0.41 kg)

MM700 2 x AAA CAT IV 600V Carrying Case, Test Leads, Thermocouple, Batteries, and Alligator Clips 7" (177.8 mm) 2-3/32" (53.2 mm) 3-35/64" (90.1 mm) 0.90 lb (0.41 kg)