TRUporte BD069W01BW1BWE36084 User manual

Type
User manual

This manual is also suitable for

TRUporte BD069W01BW1BWE36084 is a device meant to ease the building process of a barn door and it comes with several parts and easy to follow instructions. The door can be assembled by two people and with basic skills and tools. The assembly time is estimated to be about one hour.

Made of a durable material, it is suited for both indoor and outdoor use and can be a good choice for both a home and business space. Since it has a classic and stylish look, it can fit in with a variety of decors and designs.

TRUporte BD069W01BW1BWE36084 is a device meant to ease the building process of a barn door and it comes with several parts and easy to follow instructions. The door can be assembled by two people and with basic skills and tools. The assembly time is estimated to be about one hour.

Made of a durable material, it is suited for both indoor and outdoor use and can be a good choice for both a home and business space. Since it has a classic and stylish look, it can fit in with a variety of decors and designs.

EASY-BUILD BARN DOOR INSTRUCTIONS
Outer Panel 1 Inner Panel 2 Inner Panel 3 Inner Panel 4 Inner Panel 5 Outer Panel 6
PARTS INCLUDED IN KIT:
EASY-BUILD BARN DOOR ASSEMBLY INSTRUCTIONS*
x2
Holes
for
Left
Strap
Holes
for
Right
Strap
x2
(A) Horizontal Brace Bar (with pre-welded Acorn Nuts)
x12
(D) Washer
x12
(E) Acorn Nut
(B) Horizontal Brace Bar (Drilled)
Place both
(A) Horizontal
Brace Bars
with pre-welded
Acorn Nuts facing
the ground*,
approximately
58.25" apart.
1 Screw in the first (C) Double End Bolts into
the very first hole (left side) of both
(A) Horizontal Brace Bars
Note: Use flat-head screwdriver to gently tighten
2
(F) Scratch Shield
x2
TOOLS REQUIRED: WEIGHT: ASSEMBLY:
SKILL LEVEL:
Easy
* Assemble Door on a protective surface such as a towel, blanket or carpet. ** Tighten - with 11/16" (17mm) deep Socket Wrench and use the protective (F) Scratch Shield
11/16" (17mm)
Deep Socket Wrench
Measuring TapeFlat-head Screwdriver 1 Hour assembly
113 LB
51 KG
People
2
Place (B) Horizontal Brace Bar (Drilled) through all 6 exposed (C) Double End Bolts and place (D) Washers and (E) Acorn Nuts
6
Using the (F) Scratch Shield placed over the (E) Acorn Nut, tighten - with 11/16" (17mm) deep Socket Wrench - the first (E) Acorn Nut on both Horizontal Brace Bars
7
Repeat step 7 on panel (C) Double End Bolts (Right side) Note: only gently hand tighten
8
Commence tightening** the rest of the (E) Acorn Nuts using (F) Scratch Shield, tightening** both bolts on each plank - working from right to left
10
(B)
(D)
(E)
(D)
(E)
(D)
(E)
(D)
(E)
(D)
(E)
(D)
(E)
1st
2nd
3rd4th5th6th
Towel, blanket or carpet
Towel, blanket or carpet
Towel, blanket or carpet
Top Left
58.25" apart
(A)
(A)
(C)
(C)
(C)
(C)
(C)
(C)
Insert Outer Panel over both assembled (C) Double End Bolts
3
Take Inner Panel and slide into Panel and bring together
making sure Dowel (at bottom) fits into Panel snug
4
Take 2 (C) Double End Bolts
and screw through Panel
into the (A) Horizontal Brace Bars
Note: Holes on plank and brace
bar should be aligned.
Use flat-head screwdriver
to gently tighten
5
(A)
(A)
Side profile
Side profile
Bottom Cross-section view
Bottom Cross-section view
Bottom Cross-section view
Bottom Cross-section view
Cross-section view
Flat-head
Screwdriver
Press together all the panels into panel until they are tight, place (D) Washers and (E) Acorn Nuts on both Panel Bolts and tighten** them.
9
You Made It
x12
(C) Double End Bolt
P
L
A
C
E
O
V
E
R
A
C
O
R
N
N
U
T
S
T
O
P
R
O
T
E
C
T
B
R
A
C
E
B
A
R
S
U
R
F
A
C
E
Bottom Cross-section view
Bottom Cross-section view
Dowel
Adjustable Wrench
(F)
P
L
A
C
E
O
V
E
R
A
C
O
R
N
N
U
T
S
T
O
P
R
O
T
E
C
T
B
R
A
C
E
B
A
R
S
U
R
F
A
C
E
REPEAT: Working from left to right - Repeat Steps 4 and 5 until all planks are connected (See above)
  • Page 1 1

TRUporte BD069W01BW1BWE36084 User manual

Type
User manual
This manual is also suitable for

TRUporte BD069W01BW1BWE36084 is a device meant to ease the building process of a barn door and it comes with several parts and easy to follow instructions. The door can be assembled by two people and with basic skills and tools. The assembly time is estimated to be about one hour.

Made of a durable material, it is suited for both indoor and outdoor use and can be a good choice for both a home and business space. Since it has a classic and stylish look, it can fit in with a variety of decors and designs.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI