SnapSafe 75905 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the SnapSafe 75905 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Dehumidifier Rod
Provides maintenance-free solutions for humidity
control in gun safes, closets and small enclosures.
Prevents rust and corrosion.
Easy to use, just plug it in.
12 watts coverage is approximately 300 cubic feet.
Can be used horizontally or vertically.
Optimal mounting location is horizontally near the
Use indoors only.
Do not touch rod after plugging it in.
Plug may be removed to help install the cord
through narrow holes or openings.
Mounting brackets included.
Also available in 12-inch and 18-inch sizes.
24"
Push the wire and
pull the contact plate
at the same time.
Open the
contact plate.
Pull the head
to remove.
Follow these instructions for removing
and re-installing the plug:
Dehumidifier Rod
24"
/