Troy-Bilt 23AAAA8X711 Fast Start Guide

Brand: Troy-Bilt

Model: 23AAAA8X711

Type: Fast Start Guide

Discharge Chute

Mulch Plug

Deck Lift

Lever

Front Caster Wheel Lock

Stop the engine and wait for all parts to stop moving.

Pivot the mulch plug upwards, exposing the hinge mount.

Note: The mulch plug will rest on top of the discharge

chute, and retain it in place.

With the side discharge chute pivoted upwards, hook the

tabs on the discharge chute under the hinge pin, as shown

in the inset, and pivot the discharge chute downward and

into place.

Changing from Mulching to Side Discharge

Changing Cutting Height (Step 1)

Changing Cutting Height (Step 2)

Front Caster Wheel Lock

A. Pivot the deck lift lever outward.

B. Move the lever forward to lower, and rearward to

raise the cutting height of the deck.

C. Allow the deck lift lever to pivot back towards the

mowing attachment and into the locked position.

Note: When moving the deck lift lever up and

down, the front caster wheels height must also be

adjusted to coordinate with the deck lift lever.

For example, if the deck lift lever is moved into the

lowest cutting position, then the front caster wheels

must be moved into the highest hole adjustment.

Follow this guideline when adjusting the deck height.

A. Pull up on the locking rod.

B. To lock the wheels in a straight ahead position,

move the locking rod outward to align with

the hole provided.

C. To allow the wheels to pivot freely, move

the locking rod inward to align with the hole

provided.

READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.

PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.

IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY

AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .

Need Help? Call 1-888-TO-HELP-U

Troy-Bilt 23AAAA8X711 Fast Start Guide

Troy-Bilt 23AAAA8X711 Fast Start Guide

Troy-Bilt 23AAAA8X711 Fast Start Guide

Related papers

Other documents