2. Kohler
  3. 97339-NA
97339-NA

Kohler 97339-NA Dimensions Guide

  • Hello! I am an AI chatbot trained to assist you with the Kohler 97339-NA Dimensions Guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Features
•
For use with Purist
®
, Stillness
®
, Margaux
®
and Kelston
®
freestanding bath fillers.
•
Can be installed without required freestanding bath filler.
Installed component/s: Test cap, and Mud guard.
Codes/Standards
ASME A112.18.1/CSA B125.1
KOHLER
®
Faucet Lifetime Limited
Warranty
See website for detailed warranty information.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
7-28-2017 08:10
Multiproduct Mounting-block
K-97339
Ø 4-11/16" (119 mm)
Notes
Technical Information
Install this product according to the installation
guide.
All product dimensions are nominal.
Adequate floor support is required.The wood
support must be a minimum of 2" (51 mm) thick
by 6" (152 mm) wide. 2x6 lumber is NOT
adequate for this application.
Concrete can be used as the floor support.
Requires 3/16" masonry drill bit and six 1/4" x
1-3/4" concrete screws, not included.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
7-28-2017 08:10
Multiproduct Mounting-block
K-97339
/