Tear Mender TM-16-EA User guide

REMOVAL DIRECTIONS

Since Tear Mender is permanent there is no easy solution to this problem.

However, two products DETACHOL or UNI-SOLVE will loosen the adhesive to a point

that it can be removed. They are non-aerosol, non-explosive adhesive removers that

are used in the Medical Services. They are available online and at many drug stores

and hospital supply companies.

FOR REMOVAL, FOLLOW THESE THREE STEPS: 1. Apply the removal ﬂuid and

saturate fabric to loosen adhesive bond. 2. Immediately wipe the fabric with a

sponge or rag cloth. 3. Repeat this process, continually saturating the fabric to

lift and loosen the adhesive, wiping until completely removed. Both products will

evaporate quickly. NOTE: Having the item Dry Cleaned may assist in removing the

ﬁnal trace of adhesive.

IN CASE OF SPILLS

Immediately ﬂood area with water. This can keep the curing process from occurring

and leaves a residue that is much easier to clean off.

T E A R

M E N D E R

S I N C E

1 9 3 2

B I S H ’ S

O R I G I N A L