PEAQ PDR110BT B, PDR110BT DAB plus Radio, PDR110BT-B Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the PEAQ PDR110BT B Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Imtron GmbH
Wankelstraße 5
85046 Ingolstadt
Germany
www.imtron.eu
www.peaq-online.com
Deutsch 3 - 15
Ελληνικά 16 - 28
English 29 - 41
Español 42 - 54
Français 55 - 67
Magyar 68 - 80
Italiano 81 - 93
DE
Bedienungsanleitung
FR
Mode d’emploi
EL
Οδηγίες χρήσης
HU
Kezelési leírás
EN
User Manual
IT
Manuale dell’utente
ES
Manual de instrucciones
IM_PDR110BT-B_160225_V05
10 23
Bluetooth
Connected
:
10 23
Auxiliary Input
10:23:35
:
10 23
DAB
Music station
:
10 23
FM
90.3MHz
:
H
I
J
K
O
P
M N
L
DAB+ Radio PDR110BT-B
IM_PDR110BT-B_160225_V05_A_HR.indb 1 25/2/16 7:27 PM
2
1
A
B
C
D
E
F
G
IM_PDR110BT-B_160225_V05_A_HR.indb 2 25/2/16 7:27 PM
29
ENGLISH
Safety instructions
Important Safety Instructions. Please read
the instructions carefully and keep them for
later use.
CAUTION
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
WARNING: SHOCK HAZARD - DO NOT OPEN
AVIS: RISQUE DE CHOC ÉLECTRIQUE - NE PAS OUVRIR
The lightning flash with arrow
head within an equilateral tri-
angle is intended to alert the
user to the presence of un-
insulated “dangerous voltage” within the
product’s enclosure that may be of su-
cient magnitude to constitute a risk of elec-
tric shock to persons and animals.
The exclamation point within
an equilateral triangle is in-
tended to alert the user to the
presence of important oper-
ating and maintenance instructions in the
literature accompanying the device.
For safety reasons, this class II
product is provided with double
or reinforced insulation as indi-
cated by this symbol.
Danger! Excessive sound
pressure from earphones and
headphones can cause hear-
ing loss. If you listen to loud
music for a long time, your hearing may be
impaired. Set to a moderate volume.
•This product is only intended for audio
entertainment. Do not use the product
for any other purpose than described in
this manual in order to avoid any hazard-
ous situation. Improper use is dangerous
and will void any warranty claim.
•For household use only. Do not use out-
doors.
•Danger of suocation! Keep all pack-
aging material away from children.
•Only use under normal room tempera-
ture and humidity conditions.
•The product is only suitable for use at
moderate degrees of latitude. Do not
use in the tropics or in particularly humid
climates.
•Do not move the product from cold into
warm places and vice versa. Condensa-
tion can cause damage to the product
and electrical parts.
•Do not use attachments or accessories
other than recommended by the manu-
facturer or sold with this product. Install
in accordance with this user manual.
•When installing the product, leave suf-
ficient space for ventilation (minimum
10 cm around the product). Do not in-
stall in bookcases, built-in cabinets or
the like.
•Do not impede ventilation by covering
the ventilation openings with items, such
as newspapers, table-cloths, curtains,
etc. Do not insert any objects.
•Do not install near any heat sources such
as radiators, heat registers, stoves or
other products (including amplifiers) that
produce heat.
•Do not shift or move the product when
powered on.
•Do not touch, push or rub the surface
of the product with any sharp or hard
objects.
IM_PDR110BT-B_160225_V05_A_HR.indb 29 25/2/16 7:27 PM
ENGLISH
30
•Danger! To reduce the risk of fire or elec-
tric shock, do not expose this product to
rain or moisture.
•The product shall not be exposed to
dripping or splashing and no objects
filled with liquids, such as vases, shall be
placed on the product.
•Care should be taken so that no objects
or liquids enter the enclosure through
openings.
•No naked flame sources, such as lighted
candles, should be placed on the prod-
uct.
•Refer all servicing to authorised service
agent. Do not attempt to repair the prod-
uct yourself. Servicing is required when
the product has been damaged in any
way, such as the supply cord or plug
are damaged, liquid has been spilled,
objects have fallen into the product,
the enclosure is damaged, the product
has been exposed to rain or moisture,
does not operate normally, or has been
dropped.
•Before connecting the product to a sock-
et outlet, make sure the voltage indicated
on the product corresponds to your local
mains.
•Only use the provided adaptor.
•The adaptor power plug is used as the
disconnect device; the disconnect de-
vice shall remain readily operable. To
completely disconnect the power input,
disconnect the adaptor power plug.
•The product may not function properly or
not react to the operation of any control
due to electrostatic discharge. Switch o
and disconnect the appliance; reconnect
after a few seconds.
•Protect the supply cord from being
walked on or pinched particularly at the
plug, convenience receptacles and the
point where it exits from the product.
•Disconnect the adaptor power plug in
case of faults during use, during lighten-
ing storms, before cleaning and when
not using the product for a longer period
of time.
•Danger! Before cleaning, switch the
product o and disconnect the adaptor
power plug from the socket.
•When the product has reached the end
of its service life, make it defective by dis-
connecting the adaptor power plug from
the socket and cutting the cord in two.
IM_PDR110BT-B_160225_V05_A_HR.indb 30 25/2/16 7:27 PM
31
ENGLISH
Intended Use
This product is intended for audio playback
via Bluetooth
®
, DAB-Radio, FM-Radio,
Audio input (AUX IN) or head phone. Any
other use may result in damage to product
or injuries. This product is designed for
household use only and not intended for
commercial use.
The Imtron GmbH assumes no liability for
damage to the product, for property dam-
age or for personal injury due to careless or
improper usage of the product, or usage of
product which does not meet the manu-
facturer’s specified purpose.
Main unit
A. Display screen
B. Speaker
C. Telescope antenna
D. Headphone jack
E. AUX-IN (3.5 mm)
F. USB port
G. DC-IN jack
H. MODE
I. Power/Standby
J. TUN/CH
K. MENU/INFO
L. / VOLUME/SELECT
M. TUN/CH
N. DIMMER/SNOOZE
O. ALARM
P. PRESET
Accessories
1 x AC/DC Adaptor
1 x User manual
IM_PDR110BT-B_160225_V05_A_HR.indb 31 25/2/16 7:27 PM
ENGLISH
32
Power supply
Connect the DC connector of the adaptor
to the DC IN-jack. Plug the adaptor to a
power socket.
Connections
AUX-IN
This radio allows you to listen to external
audio devices.
1. Connect a cable (not included) to the
AUX-IN jack (3.5 mm) at the back of
the radio.
2. Press Mode to select AUX.
3. Start playback from the device.
Attention
Before connecting an external playback
device, carefully read the respective user
guide and safety instructions as well as
instructions concerning usage with other
devices.
HEADPHONE CONNECTION
Connect the headphones to the Head-
phone jack of the device.
Attention
Danger! Excessive sound pressure levels
from ear buds and headphones can cause
hearing damage. Listening to loud music
for extended periods of time may lead to
hearing impairment. Keep the volume at
reasonable levels.
USB connection
Charging external devices
External devices can be charged via USB
with this speaker. Connect the device to
the USB port (output: 5 V/ 1000 mA)
Note: USB music data playback is not
possible.
Operation
ADJUSTING THE ANTENNA
For optimal reception, extend the antenna,
move to fully extend and adjust it.
TURNING THE UNIT ON
Press the power/standby button to turn the
unit on.
ADJUSTING THE VOLUME
The volume can be adjusted during play-
back with the volume control.
IM_PDR110BT-B_160225_V05_A_HR.indb 32 25/2/16 7:27 PM
33
ENGLISH
DAB RADIO
When the radio is switched on for the first
time, it will automatically do a full scan of
DAB/DAB+ stations. The list of stations is
then stored, eliminating the need for an-
other full scan when the radio is turned on
next time.
When the scan is complete, the stations
are stored in alphabetical order. The first
available station will be played back.
Note
If there is no DAB reception at any time,
change the position of the unit or adjust
the antenna. Press Scan to start a new
search.
CHANGING DAB/DAB+ STATIONS
1. Press TUN/CH in DAB mode to navi-
gate available DAB/DAB+ stations.
2. To confirm, press the turning knob
VOLUME/SELECT.
STORING DAB STATIONS
Press and hold the button MENU/INFO
in DAB mode until “Full scan” appears on
the display. Press VOLUME/SELECT to
confirm.
The unit scans all available DAB/DAB+ sta-
tions and plays the first available station.
Note
New stations and services are added to
the stored DAB/DAB+ stations. In order
to make new DAB/DAB+ stations and ser-
vices available on your radio, run a full scan
at regular intervals.
DISPLAYING STATION INFORMATION
1. Select a DAB station.
2. During DAB/DAB+ radio playback,
press INFO repeatedly to display the
following information (if available):
•Ensemble
•Frequency
•Signal frequency error
•Audio state and bit rate
•Time
•Date
•Radio text
•Signal strength
•Programme type
STORING DAB STATIONS
You can store up to 10 preset DAB/DAB+
stations.
1. Select the desired station.
2. Press and hold PRESET until “Save to
P#” flashes on display.
3. Press TUN/CH to preset a number
from 1 -10. Press VOLUME/SELECT
to confirm the selection.
4. The preset number of the stored sta-
tion is displayed.
5. Repeat steps 1 to 4 to store more
DAB/DAB+ stations.
SELECTING PRESET DAB STATIONS
1. Press MODE to select the DAB/DAB+
mode.
2. Press PRESET to access the Preset
menu.
3. Use TUN/CH to select a preset num-
ber and confirm your selection by
pressing VOLUME/SELECT.
IM_PDR110BT-B_160225_V05_A_HR.indb 33 25/2/16 7:27 PM
ENGLISH
34
USING THE DAB/DAB+ MENUS
In DAB mode press MENU/INFO until dis-
play shows [Full scan] and use TUN/CH to
browse the menu options. To confirm your
selection press VOLUME/SELECT every
time.
•[Full scan]
Searches for all available DAB/DAB+
stations.
•[Manual tune]
Manual tuning adjustment, for example
aligning the antenna or adding stations.
•[Prune]
Removes all invalid stations from the
station list.
•[System]
PRUNE
Deleting inactive DAB stations
1. Press TUN/CH until <Prune> appears
and confirm with VOLUME/SELECT.
2. Select <Yes> with TUN/CH and con-
firm with VOLUME/SELECT.
FM radio
SELECTING FM STATIONS
1. Press MODE to select FM stations.
2. The radio plays the last station se-
lected.
SELECTING FM STATION FREQUENCIES
1. Select a FM station.
2. Manual frequency selection.
Press TUN/CH to change the
frequency at intervals of 0.05 MHz.
3. Automatic frequency selection.
Press VOLUME/SELECT and the ra-
dio will stop searching once an active
station has been found.
STORING FM STATIONS
You can store up to 10 preset FM stations.
1. Select the desired FM station.
2. Press and hold PRESET until “Save to
P#” flashes on display.
3. Press TUN/CH to preset a number
from 1 -10. Press VOLUME/SELECT
to confirm the selection.
4. The preset number of the stored
station is displayed.
SELECTING A PRESET FM STATION
1. Press MODE to select FM stations.
2. Press PRESET to access the Preset
menu.
3. Use TUN/CH to select a preset num-
ber and confirm your selection by
pressing VOLUME/SELECT.
IM_PDR110BT-B_160225_V05_A_HR.indb 34 25/2/16 7:27 PM
35
ENGLISH
USING THE FM MENU
1. Press MENU/INFO in FM mode and
select a menu option with TUN/CH:
•[Scan setting]
•[Audio setting]
•[System]
2. Confirm selection with VOLUME/SE-
LECT.
SCAN SETTING
1. Press and hold MENU/INFO in FM
mode and select with TUN/CH [Scan
setting].
2. Press VOLUME/SELECT to confirm
the selection.
•[Strong stations only]
Scans for stations with strong signals
•[All stations]
Scans all available stations
3. Select a menu option with TUN/CH
and confirm with VOLUME/SELECT.
AUDIO SETTING
Selecting mono or stereo mode.
1. Press and hold MENU/INFO in FM
mode and select with TUN/CH [Audio
setting].
2. Select a menu option with TUN/CH
and confirm with VOLUME/SELECT.
•[Forced mono]
Selects mono playback
•[Stereo allowed]
Selects stereo playback
General settings
Press and hold MENU/INFO in any mode
and select [System] with TUN/CH. Confirm
selection with VOLUME/SELECT.
Following menu options are available:
•[Time]
•[Sleep]
•[SW version]
•[Factory Reset]
SETTING THE TIME
1. Select menu option [Time] with TUN/CH
and confirm with VOLUME/SELECT.
2. Use TUN/CH to select the desired
sub-menu:
•Set 12/24 hour: Choice of 12 or 24
hour format
•Set Time/Date: manual time and
date setting
•Auto update: Choice of DAB Update
or No Update
•Set date format: Choice of DD-MM-
YYYY or MM-DD-YYYY
IM_PDR110BT-B_160225_V05_A_HR.indb 35 25/2/16 7:27 PM
ENGLISH
36
SETTING THE SLEEP-TIMER
After a pre-selected amount of time, this
unit can automatically change to standby
mode.
1. Select menu option [Sleep] with TUN/
CH and confirm with VOLUME/SE-
LECT.
2. Use TUN/CH to select the desired op-
tions:
•[Sleep O]
•[10 minutes]
•[20 minutes]
•[30 minutes]
•[60 minutes]
•[70 minutes]
•[80 minutes]
•[90 minutes]
FACTORY SETTINGS
Select menu option [Factory reset] with
TUN/CH and confirm with VOLUME/SE-
LECT.
DISPLAYING THE SOFTWARE VERSION
Select menu option [Factory reset] with
TUN/CH and confirm with VOLUME/SE-
LECT.
SETTING THE ALARM TIME
Make sure the clock shows the correct
time.
1. Press ALARM button to choose fol-
lowing options:
•[Alarm 1 Setup]
•[Alarm 2 Setup]
2. Press VOLUME/SELECT to access
the Alarm Wizard.
3. On time: Set the hours and minutes
with TUN/CH and confirm with VOL-
UME/SELECT.
4. Set the alarm duration [Duration] with
TUN/CH and confirm with VOLUME/
SELECT.
•[15 mins]
The alarm sounds for 15 minutes.
•[30 mins]
The alarm sounds for 30 minutes.
•[45 mins]
The alarm sounds for 45 minutes.
•[60 mins]
The alarm sounds for 60 minutes.
•[90 mins]
The alarm sounds for 90 minutes.
5. Select the alarm tone [Source] with
TUN/CH and confirm VOLUME/SE-
LECT.
•[Buzzer]: Make the buzzer your
alarm tone.
•[DAB]: Make the most recent DAB +
station played your alarm tone.
•[FM]: Make the most recent FM
station played your alarm tone.
IM_PDR110BT-B_160225_V05_A_HR.indb 36 25/2/16 7:27 PM
37
ENGLISH
6. Set alarm schedule with TUN/CH and
confirm with VOLUME/SELECT.
•[Daily] The alarm is activated every
day.
•[Weekends] The alarm is activated
on Saturdays and Sundays.
•[Weekdays] The alarm is activated
from Monday to Friday.
•[Once][xx-xxxxxx] (Date to be de-
termined) The alarm is activated only
once. The date must be set.
Note
If [DAB] or [FM] is selected, [last listened]
will be displayed. Press VOLUME/
SELECT to confirm.
7. The volume bar will be displayed. Ad-
just the volume with TUN/CH and con-
firm with VOLUME/SELECT.
8. Switch on/o the alarm [Alarm on/
Alarm o] with TUN/CH and confirm
with VOLUME/SELECT.
9. The alarm settings are stored and
[alarm saved] is displayed.
ACTIVATING OR DEACTIVATING THE
ALARM TIMER
1. Press ALARM in standby mode to
show the alarm state.
2. Press repeatedly ALARM, to select fol-
lowing options:
•Alarm1: O / Alarm2: O
•Alarm1: On / Alarm2: O
•Alarm1: O / Alarm2: On
•Alarm1: On / Alarm2: On
REPEAT ALARM
When the alarm sounds, press DIMMER/
SNOOZE to select the slumber function
interval:
•[Snooze 5 minutes]
The alarm repeats after 5 minutes.
•[Snooze 10 minutes]
The alarm repeats after 10 minutes.
•[Snooze 15 minutes]
The alarm repeats after 15 minutes.
•[Snooze 30 minutes]
The alarm repeats after 30 minutes.
TURNING OFF THE ALARM
When the alarm sounds, press Power to
turn the alarm o.
SELECTING THE BACKLIGHT SETTINGS
Press repeatedly DIMMER/SNOOZE to
select following illumination settings:
•[Low]
•[Medium]
•[High]
•[O]
IM_PDR110BT-B_160225_V05_A_HR.indb 37 25/2/16 7:27 PM
ENGLISH
38
Bluetooth
®
This mode allows you to use the radio as a
speaker for an external device (e.g. mobile
phone or MP3 player). The signal is trans-
mitted wirelessly via Bluetooth
®
.
Note
Before playback, you must pair the radio
(in this case the Bluetooth
®
receiver) and
the device (transmitter).
Compatibility
This product is compatible with Bluetooth
®
enabled mobile phones and music devic-
es. It features Bluetooth
®
version 2.1+EDR.
It also works with devices featuring other
Bluetooth
®
versions that support e.g.
Wireless stereo listening
•A2DP (Advanced Audio Distribution Pro-
file)
Wireless music control
•AVRCP (Audio/Video Remote Control
Profile)
Note
•Keep the range of 8 meters when pairing.
•Before pairing a Bluetooth
®
AV source,
refer to the AV source user guide regard-
ing safety instructions and use with other
devices.
Pairing
1. Press the MODE button until
<Bluetooth
®
> appears on the display.
The product is in Bluetooth
®
mode.
2. Activate the Bluetooth
®
function on
the playback device. If necessary
make a search for Bluetooth
®
de-
vices. Pair your playback device with
PDR110BT-B. The devices are now
connected, and <Bluetooth
®
Con-
nected> appears on the display.
3. To end the Bluetooth
®
connection:
•Turn o the Bluetooth
®
function on
the playback device.
•Change the Mode
Bluetooth
®
-Playback
1. Start the music playback on the au-
dio device or press button on the
speaker.
2. Press the TUN/CH button shortly to
skip title forward or backward.
3. Adjust the volume VOLUME/SELECT.
IM_PDR110BT-B_160225_V05_A_HR.indb 38 25/2/16 7:27 PM
39
ENGLISH
AUX IN
This mode allows you to use the radio as a
speaker for an external device (e.g. mobile
phone or MP3 player).
Warning! Observe the relevant safety in-
formation for use with other devices when
connecting an external device.
1. Connect the cinch plug (3.5 mm) of
the audio cable with the audio play-
back device and the other cinch plug
(3.5 mm) into the AUX IN-jack of the
speaker.
2. Press the MODE button until <Auxilia-
ry Input> appears on the display. The
product is in AUX IN mode.
3. Turn on the audio playback device and
start the music playback.
4. You can adjust the volume with VOL-
UME/SELECT.
IM_PDR110BT-B_160225_V05_A_HR.indb 39 25/2/16 7:27 PM
ENGLISH
40
Troubleshooting
If there are any problems during operation, please refer to the following table. If problems
cannot be solved as indicated under Solution, please contact your manufacturer.
Problem Possible causes Solution
Product does not
function
•Interrupted power supply •Check the power supply
No Sound •Volume is very low
•External device is muted
•Adjust the volume
•Check and turn o mute on
the external device.
Poor audio quality
with Bluetooth
®
connection
•Poor Bluetooth
®
reception •Move both devices closer
together or remove any
obstacles between.
No Bluetooth
®
connection
•The external device does
not support the profiles for
this product
•Bluetooth
®
function is disable
•Try to pair with another
external device.
•Enable the Bluetooth
®
function.
Poor radio reception
quality
•Poor radio reception •Place the product to an-
other place and adjust the
antenna again.
IM_PDR110BT-B_160225_V05_A_HR.indb 40 25/2/16 7:27 PM
41
ENGLISH
Technical Data
ADAPTOR
ADAPTOR Input (AC/DC adaptor) : 100 - 240 V~ / 50/60 Hz
Output (AC/DC adaptor) : 9 V
2 A
DAB RADIO
Input : 9 V
2 A
USB charging : 5 V
1 A
Operation power consumption : 18 W
Standby power consumption : < 1 W
Tuning range (Tuner DAB) :174 - 240 MHz
Tuning range (Tuner FM) : 87.5 - 108 MHz
Tuning Grid (Tuner FM) : 0.05 MHz
Bluetooth
®
: Bluetooth
®
Profile: A2DP and AVRCP
Bluetooth
®
Range: Max. 8 M
Bluetooth
®
Version: 2.1+EDR
Operation conditions : Temperature: 5 °C - 35 °C
Humidity: 5% - 90%
Dimensions (W x H x D) : 115 x 207 x 137.5 mm
Weight: : Approx. 1.23 Kg
Cleaning and care
•Unplug the adaptor from the socket be-
fore cleaning the unit.
•Attention! Do not let water penetrate
into the unit.
•Clean the housing with a lightly damp-
ened cloth.
•Do not use sharp, scouring or aggressive
cleaners.
•Do not use chemicals (such as gasoline
or alcohol) to clean the housing.
Disposal
Do not dispose of this appliance
as unsorted municipal waste. Re-
turn it to a designated collection
point for the recycling of WEEE.
By doing so, you will help to conserve
resources and protect the environment.
Contact your retailer or local authorities for
more information.
IM_PDR110BT-B_160225_V05_A_HR.indb 41 25/2/16 7:27 PM
83
ITALIANO
Uso previsto
Questo prodotto è destinato alla ripro-
duzione audio tramite Bluetooth
®
, Radio
DAB, Radio FM, ingresso audio (AUX IN)
o cue.
Imtron GmbH non si assume alcuna
responsabilità in caso di danni al prodotto,
alle cose o in caso di lesioni personali
dovuti a usi inappropriati o impropri , o per
usi del prodotto che non rispondono alle
finalità indicate dal costruttore.
Unitàprincipale
A. Display
B. Altoparlante
C. Antenna telescopica
D. Jack cue
E. AUX-IN (3,5 mm)
F. Porta USB
G. Jack DC-IN
H. MODE
I. Accensione/Standby
J. TUN/CH
K. MENU/INFO
L. / VOLUME/SELECT
M. TUN/CH
N. DIMMER/SNOOZE
O. ALARM
P. PRESET
Accessori
1 x Adattatore AC/DC
1 x Manualed’uso
IM_PDR110BT-B_160225_V05_A_HR.indb 83 25/2/16 7:27 PM
/