17
To turn o the auxiliary functions, unlock
the control panel again as described in the
Settings section and press the MODE button
repeatedly until none of the additional function
icons light up. As a result, any additional
functions are deactivated and the device
operates at the preset temperatures.
Ice cube maker
The scope of delivery includes an integrated ice
cube maker with collecting drawer.
Fig.
9
1
Pull out the tray with the ice cube
maker, pour water into the ice cube
moulds, and make sure the water is
evenly distributed throughout the
ice cube moulds. Fill the ice cube
moulds to max. 3/4. To do this, pull
out the collecting drawer as well to
catch any spilled water. After filling,
if necessary, pull out the collecting
drawer completely to empty any
spilled water. Slide back both, the
tray with the ice cube maker and the
collecting drawer.
Note:
Please note that the box must be dry inside,
otherwise the collecting tray will freeze and
may not be removable.
2
Wait for at least 1.5 hours.
3
Turn the knob all the way to the
right and release. This will release
the ice cubes and drop into the drip
collecting drawer.
4
Repeat the process several times
until all ice cubes have fallen into
the collecting drawer. If more ice
cubes are needed, repeat steps
1
-
3
.
Door height adjustment
1
If the doors do not close properly or are
not aligned, the height can be adjusted.
2
Use the wrench provided (b) to loosen the
counter nut (c) and then adjust the height
of each door by turning the adjusting nut
(a) with the wrench (b). If the height is
correct and both doors are aligned, tighten
the counter nut (c) again.
Energy saving tips
• Do not place the product in the vicinity of a
heat source (radiator or kitchen stove, etc.).
• Ensure unobstructed air flow around the
refrigerator and freezer.
• If an ice layer has built, defrost the unit. A
thick ice layer aects the transmission of the
cold, thus the energy consumption will be
increased.
• When taking out food, only open the door
shortly. A shorter door opening time causes
less ice to deposit on the freezer walls.
• Select the temperature regulator setting
according to the filling amount of the
product.
• Use drawers, baskets or shelves to store the
food. If the energy of the product is used
eciently, the energy consumption can be
minimized.
IM_KDD112-A3-INVNF_181113_V06_HR.indb 17 13/11/18 9:28 am